Alfa Romeo

Name: Lower Rear Engine Mount InsertProduct Notes: For C510.5 and C514 gearboxes. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 225%Black Series insert increases stiffness at 1mm by 143%, at 2mm by 219% and at 3mm by 280% Weight: 90Fitting Instructions

Name: Lower Rear Engine Mount InsertProduct Notes: Not recommended for 3cyl or diesel engined vehicles due to the potential for increased vibration. PFF80-1120 fits this type of mount only. Please check the picture below before ordering. Weight: 99

Name: Lower Rear Engine Mount InsertProduct Notes: Not recommended for 3cyl or diesel engined vehicles due to the potential for increased vibration. PFF80-1120 fits this type of mount only. Please check the picture below before ordering. Weight: 99

Name: Lower Rear Engine Mount InsertProduct Notes: For C510.5 and C514 gearboxes only. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to the Diesel or TwinAir engine vehicles, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade. Road Series insert increases stiffness at 1mm by 113%, at 2mm by 173% and at 3mm by 225% Black Series insert increases stiffness at 1mm by 143%, at 2mm by 219% and at 3mm by 280%Weight: 90Fitting Instructions

Name: PowerAlign Camber Bolt Kit (10mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your toolkit so that you can make pit garage adjustments to your suspension using PowerAlignCamber Bolts? Bush Size: M10mm x 70mmWeight: 160Fitting Instructions

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Powerflex Handling PackProduct Notes: Included within this pack are the following parts:PFF80-1101Front Arm Front BushPFF80-1102Front Arm Rear BushPFR80-1110Rear Beam Mounting BushPFF80-1120Lower Rear Engine Mount InsertThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 2896

Name: Rear Anti Roll Bar Bush 14mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 14mmWeight: 63

Name: Rear Anti Roll Bar Bush 14mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 14mmWeight: 63

Name: Rear Anti Roll Bar Bush 16mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 16mmWeight: 63

Name: Rear Anti Roll Bar Bush 16mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 16mmWeight: 63

Name: Rear Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 184

Name: Rear Anti Roll Bar Bush 18mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 18mmWeight: 63

Name: Rear Anti Roll Bar Bush 18mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 18mmWeight: 63

Name: Rear Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 184

Name: Rear Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 184

Name: Rear Anti Roll Bar Bush 21mmProduct Notes: Bush Size: 21mmWeight: 184

Name: Rear Anti Roll Bar Bush 21mmProduct Notes: Bush Size: 21mmWeight: 184

Name: Rear Anti Roll Bar Bush 21mmProduct Notes: Bush Size: 21mmWeight: 184

Name: Rear Anti-Roll Bar Bush 14mmProduct Notes: Fits 1.4L models. Please check anti roll bar diameter before ordering. Since the original bushes are bonded, it is reccomended that that PFR1-1013-14 are used with PFC13-14 Anti-Roll Bar Lateral Support Clamps prevent side to side movement. Bush Size: 14mmWeight: 150

Name: Rear Anti-Roll Bar Bush 14mm Product Notes: Fits 1.4L models. Please check anti roll bar diameter before ordering. Since the original bushes are bonded, it is reccomended that that PFR1-1013-14 are used with PFC13-14 Anti-Roll Bar Lateral Support Clamps prevent side to side movement. Bush Size: 14mmWeight: 150

Name: Rear Anti-Roll Bar Bush 15mm Product Notes: Fits 1.6 - 2.0L models. Please check anti roll bar diameter before ordering. Since the original bushes are bonded, it is reccomended that that PFR1-1013-15 are used with PFC15-16 Anti-Roll Bar Lateral Support Clamps prevent side to side movement. Bush Size: 15mmWeight: 150

Name: Rear Anti-Roll Bar Bush 15mm Product Notes: Fits 1.6 - 2.0L models. Please check anti roll bar diameter before ordering. Since the original bushes are bonded, it is reccomended that that PFR1-1013-15 are used with PFC15-16 Anti-Roll Bar Lateral Support Clamps prevent side to side movement. Bush Size: 15mmWeight: 150

Name: Rear Beam Mounting BushProduct Notes: Weight: 1057

Name: Rear Beam Mounting BushProduct Notes: Weight: 1057

Name: Rear Beam Tie Bar BushProduct Notes: These bushes do not fit 4WD models. Weight: 889

Name: Rear Beam Tie Bar BushProduct Notes: These bushes do not fit 4WD models. Weight: 889

Name: Rear Beam Tie Bar BushProduct Notes: These bushes do not fit 4WD models. Weight: 889

Name: Rear Lower Arm Inner BushProduct Notes: Weight: 405Fitting Instructions

Name: Rear Lower Arm Inner BushProduct Notes: Weight: 405Fitting Instructions