Alfa Romeo

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

Name: Front Shock Lower BushProduct Notes: Weight: 675

Name: Front Shock Lower BushProduct Notes: Weight: 675

Name: Front Tie Bar BushProduct Notes: Weight: 585

Name: Front Tie Bar BushProduct Notes: Weight: 585

Name: Front Tie Bar BushProduct Notes: Weight: 585

Name: Front Upper Arm BushProduct Notes: Weight: 566Fitting Instructions

Name: Front Upper Arm BushProduct Notes: Weight: 566Fitting Instructions

Name: Front Upper Arm Front BushProduct Notes: For an adjustable version of this bush please use PFF1-505GBLK. Weight: 303Fitting Instructions

Name: Front Upper Arm Front BushProduct Notes: For an adjustable version of this bush please use PFF1-505G. Weight: 303Fitting Instructions

Name: Front Upper Arm Front Bush, AdjustableProduct Notes: On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-506GBLK. For a non-adjustable version of this bush please use PFF1-505BLK. Weight: 555Fitting Instructions

Name: Front Upper Arm Front Bush, AdjustableProduct Notes: On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-506G. For a non-adjustable version of this bush please use PFF1-505. Weight: 555Fitting Instructions

Name: Front Upper Arm Rear BushProduct Notes: For an adjustable version of this bush please use PFF1-506GBLK. Weight: 287Fitting Instructions

Name: Front Upper Arm Rear BushProduct Notes: For an adjustable version of this bush please use PFF1-506G. Weight: 287Fitting Instructions

Name: Front Upper Arm Rear Bush, AdjustableProduct Notes: On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-505GBLK. For a non-adjustable version of this bush please use PFF1-506BLK. Weight: 565Fitting Instructions

Name: Front Upper Arm Rear Bush, AdjustableProduct Notes: On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-505GBLK. For a non-adjustable version of this bush please use PFF1-506. Weight: 565Fitting Instructions

Name: Front Upper Spring Mount Inner BushProduct Notes: Weight: 215Fitting Instructions

Name: Front Upper Spring Mount Inner BushProduct Notes: Weight: 215Fitting Instructions

Name: Front Upper Spring Mount Inner BushProduct Notes: Weight: 215Fitting Instructions

Name: Front Wishbone Front Bush Product Notes: PFF1-1001 is a replacement bush that is 11% stiffer than the original rubber bush. For a camber adjustable version of this bush please use PFF1-1001G. Weight: 684

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: PFF1-1001G is a replacement bush that is 11% stiffer than the original rubber bush and provides +/- 0.5 of on-car camber adjustment. For a non-adjustable version of this bush please use PFF1-1001. Weight: 808Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: PFF1-1002 is a replacement bush that in our purple Road Series material is 23% stiffer than the original bush. For a caster offset version of this part please use PFF1-1002G. Weight: 674Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: PFF1-1002BLK is a replacement bush that in our Black Series material is 168% stiffer than the original bush for Track/Competition use. For a caster offset version of this part please use PFF1-1002GBLK. Weight: 674Fitting Instructions

Name: Front Wishbone Rear Bush Caster OffsetProduct Notes: PFF1-1002G is a replacement bush that in our purple Road Series material is 23% stiffer than the original rubber bush and gives a fixed 5mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF1-1002. Weight: 674Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF1-1002G is a replacment bush that in our Black Series material is 168% stiffer than the original rubber bush for Track/Competition use and gives a fixed 5mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF1-1002BLK. Weight: 674Fitting Instructions

Name: Gearbox Mount Rear Insert KitProduct Notes: Fits models from 1963-1993 using a hydraulic clutch. The buffer washers sit between the bush and gearbox cross-member area once our insert has been installed. Weight: 237Fitting Instructions

Name: Gearbox Mount Rear Insert KitProduct Notes: Fits models from 1963-1993 using a hydraulic clutch. The buffer washers sit between the bush and gearbox cross-member area once our insert has been installed. Weight: 237Fitting Instructions

Name: Jack Pad AdaptorProduct Notes: PF1-1260 is a polyurethane jack pad to fit into the plastic lifting points found on some Alfa Romeo and Maserati models and is designed to help lift stability and location, whilst protecting the underside of your vehicle. When lifting a vehicle using a trolleyjack, it's critical to ensure that thejackis going to fit the vehicle securely, and manufacturers often fit specific lifting points to allow this process to be done with confidence.Made fromBlack 95Adurometer PUfor durability and designed to fit onto an 80mmjacksaddle, and into the original rectangular plastic lifting point,these handy workshop widgets helplift/jackingstability and location whilst protecting the underside of yours/your customer's vehicle.To use, simply place ourJackPadon your trolleyjack, align with the recess in the original plastic lifting point and lift the car correctly and securely. Weight: 138

Name: Lower Engine Mount Bush InsertProduct Notes: Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement. Our polyurethane insert kit ships with a bolt spacing sleeve made using our Shore A 95 Black material to take up the excessive tolerance on the bore of the original mount to further reduce engine movement under load. Weight: 92Fitting Instructions

Name: Lower Engine Mount Bush InsertProduct Notes: Insert for the original bush. An increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement. Our polyurethane insert kit ships with a bolt spacing sleeve made using our Shore A 95 Black material to take up the excessive tolerance on the bore of the original mount to further reduce engine movement under load. Weight: 92Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: Fits 500 Non-Abarth 1.2 & 1.4 lower engine mounts. This part fits into voids in original bush. Please check void pattern is the same as on your vehicle. For a complete mount for 500 models use PFF16-530. Fits Grande Punto, Punto Evo and Mk3 Punto 1.2, 1.4 8v and 1.4 16v non-turbo engines. Fits MiTo with 1.4 8v or 1.4 16v non-turbo engines. Weight: 55

Name: Lower Engine Mount InsertProduct Notes: Fits 500 Non-Abarth 1.2 & 1.4 lower engine mounts. This part fits into voids in original bush. Please check void pattern is the same as on your vehicle. For a complete mount for 500 models use PFF16-530. Fits Grande Punto, Punto Evo and Mk3 Punto 1.2, 1.4 8v and 1.4 16v non-turbo engines. Fits MiTo with 1.4 8v or 1.4 16v non-turbo engines. Weight: 55