Alfa Romeo

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Fits models up to 1981. For models from 1981 on, use PFF1-103-18. Bush Size: 22mmWeight: 119

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Fits models up to 1981. For models from 1981 on, use PFF1-103-18H. Bush Size: 22mmWeight: 119

Name: Front Anti Roll Bar To Link Rod BushProduct Notes: Part fits Alfa Romeo GTV model year 1995 - 2002. Weight: 121Fitting Instructions

Name: Front Anti Roll Bar To Link Rod BushProduct Notes: Part fits Alfa Romeo GTV model year 1995 - 2002. Weight: 121Fitting Instructions

Name: Front Anti Roll Bar To Link Rod BushProduct Notes: Part fits Alfa Romeo GTV model year 1995 - 2002. Weight: 121Fitting Instructions

Name: Front Arm Front Bush Product Notes: PFF1-1001BLK is a replacement bush that is 11% stiffer than the original rubber bush. For a camber adjustable version of this bush please use PFF1-1001GBLK. Weight: 684

Name: Front Arm Front BushProduct Notes: Weight: 477

Name: Front Arm Front BushProduct Notes: Weight: 477Fitting Instructions

Name: Front Arm Front Bush Camber AdjustableProduct Notes: PFF1-1001GBLK is a replacement bush that is 11% stiffer than the original rubber bush and provides +/- 0.5 of on-car camber adjustment. For a non-adjustable version of this bush please use PFF1-1001BLK. Weight: 808Fitting Instructions

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF80-1102 Front Arm Rear Bush Caster Adjust has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0 of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased considerably over standard rubber. Suitable for Road and Black Series applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1434Fitting Instructions

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF80-1102BLK Front Arm Rear Bush Caster Adjust has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0 of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased considerably over standard rubber. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1434Fitting Instructions

Name: Front Caster Bar To Body Bush Product Notes: Weight: 149

Name: Front Caster Bar To Body Bush Product Notes: Weight: 149

Name: Front Caster Bar To Body Bush Product Notes: Weight: 149

Name: Front Inner Wishbone BushProduct Notes: Weight: 418

Name: Front Inner Wishbone BushProduct Notes: Weight: 418

Name: Front Inner Wishbone BushProduct Notes: Weight: 418

Name: Front Lower Arm Front BushProduct Notes: Weight: 128Fitting Instructions

Name: Front Lower Arm Rear BushProduct Notes: Fits models from around 2007 on with 54mm wide bracket. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket. Bush Size: 54mmWeight: 877Fitting Instructions

Name: Front Lower Arm Rear BushProduct Notes: Weight: 403

Name: Front Lower Arm Rear BushProduct Notes: Fits models from around 2007 on with 54mm wide bracket.et. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket. Bush Size: 54mmWeight: 877Fitting Instructions

Name: Front Lower Arm Rear Bush 46mmProduct Notes: Fits early models up to around 2007 with a 46mm wide bracket. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket. Bush Size: 46mmWeight: 872Fitting Instructions

Name: Front Lower Arm Rear Bush 46mmProduct Notes: Fits early models up to around 2007 with a 46mm wide bracket. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket. Bush Size: 46mmWeight: 872Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-811 with the more popular 19mm bore sleeve, but we have seen wishbones with 20mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 372Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-811 with the more popular 19mm bore sleeve, but we have seen wishbones with 20mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 372Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 304Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 304Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 304Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 656Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 656Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions