Volkswagen

Name: Lower Engine Mount Small Bush Product Notes: Weight: 178 Fitting Instructions

Name: Lower Engine Mount Small Bush Product Notes: PFF3-905 Lower Engine Mount Small Bush is a replacement for the often softened and perished, rubber bush in the original 'dog bone' shaped bracket, helping to restrict engine movement and improve gear changes.Fits 42mm diameter, for bushes with a 38.5mm diameter please use PFF85-505. Bush Size: 42mmWeight: 199Fitting Instructions

Name: Lower Engine Mount Small Bush Product Notes: PFF3-905 Lower Engine Mount Small Bush is a replacement for the often softened and perished, rubber bush in the original 'dog bone' shaped bracket, helping to restrict engine movement and improve gear changes.Fits 42mm diameter, for bushes with a 38.5mm diameter please use PFF85-505. Bush Size: 42mmWeight: 199Fitting Instructions

Name: Lower Engine Mount Small BushProduct Notes: Weight: 178Fitting Instructions

Name: Lower Torque Mount Large Bush (Fast Road)Product Notes: PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922. Weight: 596Fitting Instructions

Name: Lower Torque Mount Large Bush (Motorsport)Product Notes: PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922. Weight: 596Fitting Instructions

Name: Lower Torque Mount Large Bush (Tuned/Track)Product Notes: PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922. Weight: 596Fitting Instructions

Name: Lower Torque Mount Large Bush Insert (Motorsport)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923. Weight: 60Fitting Instructions

Name: Lower Torque Mount Large Bush Insert (Motorsport)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering Weight: 61Fitting Instructions

Name: Lower Torque Mount Large Bush Insert (Standard)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923. Weight: 60Fitting Instructions

Name: Lower Torque Mount Large Bush Insert (Standard)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering Weight: 61Fitting Instructions

Name: Lower Torque Mount Large Bush Insert (Tuned/Track)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering Weight: 61Fitting Instructions

Name: Lower Torque Mount Large Bush Insert (Tuned/Track)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923. Weight: 60Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325BLK Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 0

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 100

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234. Bush Size: 15mm wide bracketWeight: 83

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234 Bush Size: 18.5mm wide bracketWeight: 99

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm Bush Size: 18.5mm wide bracketWeight: 99

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234 Bush Size: 18.5mm wide bracketWeight: 99

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234. Bush Size: 15mm wide bracketWeight: 83

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234. Bush Size: 15mm wide bracketWeight: 83