Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Toyota

Lower Engine Mount Bush Insert

Name: Lower Engine Mount Bush InsertProduct Notes: Suitable for petrol models only. This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration. For a complete, replacement bush please use PFF12-720. Weight: 111

550.-

Lower Engine Mount Bush Insert

Name: Lower Engine Mount Bush InsertProduct Notes: Suitable for petrol models only. This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration. For a complete, replacement bush please use PFF12-720. Weight: 111

510.-

Lower Torque Mount Insert

Name: Lower Torque Mount InsertProduct Notes: PFF76-920 Torque Mount Bush Insert is an affordable and easy-to-fit bush insert made from our Yellow 70A Durometer vibration-absorbing material, which works to stiffen the OEM torque mounting. This reduces the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel, as well as reducing wheel-hop and improving traction. PFF76-920can be fitted alone but will perform most effectively when fitted with our other powertrain inserts (PFF76-923 & PFF76-925) as a full set. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Our POWERFLEX PFF76-920 Lower Torque Mount increases the stiffness of the OEM powertrain mounts using our yellow 70A material. Weight: 65Fitting Instructions

460.-

Lower Torque Mount Insert

Name: Lower Torque Mount InsertProduct Notes: PFF76-920BLK Torque Mount Bush Insert is an affordable and easy-to-fit bush insert made from our Black 95A Durometer high-performance material, which works to significantly stiffen the OEM torque mounting for performance on the race circuit or the rally stage. This reduces the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel, as well as reducing wheel-hop and improving traction. PFF76-920BLK can be fitted alone but will perform most effectively when fitted with our other powertrain inserts (PFF76-923BLK & PFF76-925BLK) as a full set. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Our POWERFLEX PFF76-920 Lower Torque Mount increases the stiffness of the OEM powertrain mounts using our Black 95A material. Weight: 65Fitting Instructions

500.-

PowerAlign Camber Bolt Kit (12mm x 60mm)

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

400.-

PowerAlign Camber Bolt Kit (12mm x 70mm)

Name: PowerAlign Camber Bolt Kit (12mm x 70mm)Product Notes: PFA100-12-70 PowerAlign Rear Upper Arm Outer Camber BoltKit is a cost-effective and easily fitted alternative to the more extreme and expensive adjustable arm kits (300 - 500) that are available on the market andallows for up to +/- 1.0 of on-carcamber adjustment to the rear suspension geometry. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts? Bush Size: M12 x 70mmWeight: 189Fitting Instructions

410.-

PowerAlign Camber Bolt Kit (14mm)

Name: PowerAlign Camber Bolt Kit (14mm) Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts? Bush Size: M14 x 70mm Weight: 261 Fitting Instructions

420.-

PowerAlign Camber Bolt Kit (15mm)

Name: PowerAlign Camber Bolt Kit (15mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your toolkit so that you can make pit garage adjustments to your suspension using PowerAlignCamber Bolts? Bush Size: M15 x 71.5mmWeight: 265Fitting Instructions

430.-

PowerAlign Camber Bolt Kit (16mm)

Name: PowerAlign Camber Bolt Kit (16mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your toolkit so that you can make pit garage adjustments to your suspension using PowerAlignCamber Bolts? Bush Size: M16 x 75mmWeight: 356Fitting Instructions

470.-

PowerAlign Camber Bolt Kit (17mm)

Name: PowerAlign Camber Bolt Kit (17mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your toolkit so that you can make pit garage adjustments to your suspension using PowerAlignCamber Bolts? Bush Size: M17 x 75mmWeight: 359Fitting Instructions

480.-

PowerAlign Wheel Mounting Guide Pin

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

450.-

PowerAlign Wheel Mounting Guide Pin

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

420.-

Rear Anti Roll Bar Bush 14mm

Name: Rear Anti Roll Bar Bush 14mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 14mmWeight: 156

440.-

Rear Anti Roll Bar Bush 14mm

Name: Rear Anti Roll Bar Bush 14mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 14mmWeight: 156

400.-

Rear anti Roll Bar Bush 15mm

Name: Rear anti Roll Bar Bush 15mm Product Notes: Please check anti roll bar measurement before ordering. This bush is made using our Purple 80A material with a knurled bore for grease retention for enhanced stiffness and durability, whilst letting the anti-roll bar freely rotate. Bush Size: 15mmWeight: 112

350.-

Rear Anti Roll Bar Bush 15mm

Name: Rear Anti Roll Bar Bush 15mm Product Notes: Please check anti roll bar measurement before ordering. This bush is made using our Black 95A material with a knurled bore for grease retention for enhanced stiffness and durability, whilst letting the anti-roll bar freely rotate. Bush Size: 15mmWeight: 112

310.-

Rear Anti-Roll Bar Bush 21.3mm

Name: Rear Anti-Roll Bar Bush 21.3mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits all models with a 21.3mm rear bar. Bush Size: 21.3 mmWeight: 254Fitting Instructions

740.-

Viser 97 til 128 (av 245 produkter)

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png