Toyota

Name: Front Arm Front Bush Caster AdjustProduct Notes: Allows on car adjustment of caster +/- 0,33 degrees, also has revised anti dive geometry. Weight: 859Fitting Instructions

Name: Front Arm Rear Bush Camber AdjustProduct Notes: Allows on car camber adjustment +/- 1.0 degree Weight: 510Fitting Instructions

Name: Front Arm Rear Bush Camber AdjustProduct Notes: Allows on car camber adjustment +/- 1.0 degree Weight: 510Fitting Instructions

Name: Front Control Arm Inner BushProduct Notes: Weight: 161

Name: Front Control Arm Inner BushProduct Notes: Weight: 161

Name: Front Control Arm to Roll Bar BushProduct Notes: Weight: 110

Name: Front Control Arm to Roll Bar BushProduct Notes: Weight: 110

Name: Front Engine Mount (M-Sport)Product Notes: PFF76-422BLK uses our Black 95A durometer material for heavily tuned vehicles or Motorsport use. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 314

Name: Front Engine Mount (Standard)Product Notes: PFF76-422 uses our Yellow 70A durometer material and is suitable for standard or mildly tuned vehicles. For track/tuned models use PFF76-422P. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 314

Name: Front Engine Mount (Tuned/Track)Product Notes: PFF76-422P uses our Purple 80A durometer material and is suitable for significantly tuned cars or those used on track. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 314

Name: Front Engine Mount InsertProduct Notes: Fits the 1ZZ & 2ZZ Toyota engine only. PFF34-602 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from such a vehicle. Made using our Black 95A durometer material, it provides a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 133Fitting Instructions

Name: Front Engine Mount InsertProduct Notes: Fits the 1ZZ & 2ZZ Toyota engine only. PFF34-602 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from such a vehicle. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. Weight: 133Fitting Instructions

Name: Front Gearbox Mount Bush (M-Sport)Product Notes: PFF76-420BLK uses our Black 95A durometer material for heavily tuned vehicles or Motorsport use. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 331

Name: Front Gearbox Mount Bush (Standard)Product Notes: PFF76-420 uses our Yellow 70A durometer material and is suitable for standard or mildly tuned vehicles. For track/tuned models use PFF76-420P. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 331

Name: Front Gearbox Mount Bush (Tuned/Track)Product Notes: PFF76-420P uses our Purple 80A durometer material and is suitable for significantly tuned cars or those used on track. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 331

Name: Front Inner Track Control Arm BushProduct Notes: Weight: 283

Name: Front Inner Track Control Arm BushProduct Notes: Weight: 283

Name: Front Inner Track Control Arm BushProduct Notes: Weight: 283

Name: Front Lower Arm Front Bush 14mmProduct Notes: Bush Size: 14mmWeight: 1030Fitting Instructions

Name: Front Lower Arm Front Bush 16mmProduct Notes: Bush Size: 16mmWeight: 1030Fitting Instructions

Name: Front Lower Arm Rear Bush 14mmProduct Notes: Bush Size: 14mmWeight: 1030Fitting Instructions

Name: Front Lower Arm Rear Bush 16mmProduct Notes: Bush Size: 16mmWeight: 1030Fitting Instructions

Name: Front Lower Control Arm Inner BushProduct Notes: PFF5-5402 Front Lower Control Arm Inner Bush is made from our Black 95A durometer polyurethane and paired with CNC-machined plated steel outer shells and stainless-steel sleeve, to distribute load better and reduce deflection by 25% while improving steering precision. Weight: 829Fitting Instructions

Name: Front Lower Control Arm Inner BushProduct Notes: PFF5-5402 Front Lower Control Arm Inner Bush is made from our Black 95A durometer polyurethane and paired with CNC-machined plated steel outer shells and stainless-steel sleeve, to distribute load better and reduce deflection by 25% while improving steering precision. Weight: 829Fitting Instructions

Name: Front Lower Control Arm Inner Bush Camber AdjustProduct Notes: PFF5-5402G Front Lower Control Arm Inner Bush Camber Adjust is essentially the same as PFF5-5402 but with the addition of a stainless-steel adjusting sleeve and spanner. This allows for 0.5 of camber adjustment to the front wheels, for improved front-end grip. Weight: 1012

Name: Front Lower Control Arm Inner Bush Camber AdjustProduct Notes: PFF5-5402G Front Lower Control Arm Inner Bush Camber Adjust is essentially the same as PFF5-5402 but with the addition of a stainless-steel adjusting sleeve and spanner. This allows for 0.5 of camber adjustment to the front wheels, for improved front-end grip. Weight: 1012

Name: Front Lower Wishbone Front BushProduct Notes: Weight: 793

Name: Front Lower Wishbone Front BushProduct Notes: Weight: 793

Name: Front Lower Wishbone Rear BushProduct Notes: Weight: 886Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: Weight: 886Fitting Instructions

Name: Front Radius Arm To Chassis BushProduct Notes: PFF5-5401BLKismade usingour Black 95A durometer material and supplied with outer shells to increase bush stiffness by 300%, controlling longitudinal wheel movement under braking and cornering, and improving longer-term durability. Using POWERFLEX PFF5-5401G provides a longer tyre life, increase handling of the car andbraking stability is also improved.The POWERFLEX PFF5-5401/5401G are 300% stiffer than the OEMbush Weight: 1403Fitting Instructions

Name: Front Radius Arm To Chassis BushProduct Notes: PFF5-5401 ismade usingour Black 95A durometer material and supplied with outer shells to increase bush stiffness by up to 300%, controlling longitudinal wheel movement under braking and cornering, and improving longer-term durability. Using POWERFLEX PFF5-5401G provides a longer tyre life, increase handling of the car andbraking stability is also improved.The POWERFLEX PFF5-5401/5401G are 300% stiffer than the OEMbush Weight: 1403Fitting Instructions