Skoda

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: PFF85-2002 Front Wishbone Rear Bush features a plated outer shell for a secure fitment in the wishbone and a better distribution of load under braking, and a chamfered sleeve to assist articulation and further improve performance and durability, making it a great upgrade for fast road cars or to replace the commonly worn OEM bush. This new part combines perfectly with ourPFF85-201Front Wishbone Front Bushto further improveyour car's steering precision and braking response. Bush Size: 60mmWeight: 900Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: For the Audi A2, PFF85-602 fits aluminium and pressed steel arms only as fitted to the 1.2 models and later 1.4/1.6 models. It will not fit the cast steel arms as fitted to early 1.4/1.6 models. Weight: 565Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: A2 models fitting advised for aluminium arms only and will not fit cast steel arms on these models. For a caster offset version of this bush please use PFF85-602GBLK. Weight: 565Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902GBLK. Bush Size: 65mmWeight: 1059Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G. Bush Size: 65mmWeight: 1059Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Weight: 479Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Weight: 479Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PABLK and for cast arms use PFF3-610BLK. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: PFF85-2002 Front Wishbone Rear Bush features a plated outer shell for a secure fitment in the wishbone and a better distribution of load under braking, and a chamfered sleeve to assist articulation and further improve performance and durability, making it a great upgrade for fast road cars or to replace the commonly worn OEM bush. This new part combines perfectly with ourPFF85-201BLKFront Wishbone Front Bushto further improveyour car's steering precision and braking response. Bush Size: 60mmWeight: 900Fitting Instructions

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1900Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1798Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. A2 models fitting advised for aluminium arms only and will not fit cast steel arms on these models. PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. Aimed at offering greater precision with improved geometry for people wanting the very best from their vehicle. This new part, fitted to the rear of the front wishbone has a hard-anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are improved geometry when turning giving additional grip, steering control and feel with less movement in the arm under cornering and braking. In our Road Series Purple material, stiffness is boosted by almost 100% over the original part, whilst our Black Series part increases stiffness by another 100%. Weight: 723Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. A2 models fitting advised for aluminium arms only and will not fit cast steel arms on these models. PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. Aimed at offering greater precision with improved geometry for people wanting the very best from their vehicle. This new part, fitted to the rear of the front wishbone has a hard-anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are improved geometry when turning giving additional grip, steering control and feel with less movement in the arm under cornering and braking. In our Road Series Purple material, stiffness is boosted by almost 100% over the original part, whilst our Black Series part increases stiffness by another 100%. Weight: 723Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

Name: Front Wishbone Rear Bush, Pattern Arm Product Notes: This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410BLK Bush Size: 21mm arm widthWeight: 519

Name: Front Wishbone Rear Bush, Pattern Arm Product Notes: This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410 Bush Size: 21mm arm widthWeight: 519

Name: Gearbox Mount InsertProduct Notes: PFF85-1823BLK acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Black 95A durometer material, it provides a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821BLK Upper Engine Mount Insert and PFF85-1822BLK Upper Engine Mount Insert. Weight: 72Fitting Instructions

Name: Gearbox Mount InsertProduct Notes: PFF85-1823 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821 Upper Engine Mount Insert and PFF85-1822 Lower Engine Mount Insert. For 3 Cylinder & Diesel engines, please use PFF85-1823R. Weight: 72Fitting Instructions

Name: Gearbox Mount Insert, 3 Cylinder & Diesel Product Notes: PFF85-1823R acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our softest Red 65A durometer material, specifically for Diesel models, the amount of NVH transmission is limited. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821R Upper Engine Mount Insert and PFF85-1822R Upper Engine Mount Insert. Weight: 72Fitting Instructions

Name: Jack Pad AdaptorProduct Notes: PF3-1661 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles:Audi A3 inc Quattro MK2 8P (2003-2012),Audi A4 (2008 - 2016),Audi A4 Quattro (2008 - 2016),Audi S4 (2009 - 2016),Audi RS4 (2012 - 2016),Audi A5 (2007 - 2016),Audi A5 Quattro (2007 - 2016),Audi S5 (2007 - 2016),Audi RS5 (2010 - 2016),Audi Q5 (2008-2017),Audi Q5 Quattro (2008-2017),Audi SQ5 (2013-2017),Audi RS3 MK2 8P (2011-2013),Audi S3 MK2 8P (2006-2012),Audi A3 MK3 8V up to 125PS (2013-) Rear Beam,Audi A3/S3 MK3 8V 125PS plus (2013-) Multi Link,Audi RS3 (2015-),Volkswagen Golf MK5 1K,Volkswagen Golf Mk5 GTI & R32,Volkswagen Golf Plus 5M,Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link,Volkswagen Golf MK7 5G 2WD upto 122PS Rear Beam,Volkswagen Golf MK7 5G 4WD,Volkswagen Golf MK6 5K (2009-2012),Seat Leon Mk2 1P (2005-2012),Skoda OCTAVIA 5E 150PS PLUS MULTI-LINK,Skoda OCTAVIA 5E UP TO 150PS REAR BEAM,Skoda Octavia Mk2 1Z (2004-2012),Volkswagen Passat B6 & B7 Typ3C (2006-2012),Volkswagen Passat B8 (2015 on),Volkswagen Scirocco MK3 (2008 - 2017) ,Seat Altea 5P (2004-),Skoda Superb (2009-2011) Bush Size: 80mm DiameterWeight: 224

Name: Jacking Point Insert Product Notes: PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time, again recommended for use in sets of 4 simultaneously. Fits the following vehicles:Audi A3/S3 Mk1 8L (1996-2003)Audi A3/S3/RS3 Mk2 8P (2003-2012)Audi A3/S3/RS3 Mk3 8V (2013-)Audi TT Mk1 8N (1999-2006) Audi TT/S/RS Mk2 8J (2007-2014) Audi TT Mk3 8S (2014 on) Audi Q2 (2017 on) Audi Q3 (2012 - 2018) Seat Toledo Mk2 1M (1999 - 2004) Seat Toledo Mk3 5P (2004-2009) Seat Alhambra Mk2 (2010 on) Seat Leon Mk1 TYP 1M (1999-2005) Seat Leon Mk2 1P (2005-2012) Seat Leon Mk3 5F (2013 on) Skoda Octavia Mk1 Typ 1U (1996-2004) Skoda Octavia Mk2 1Z (2004-2012) Skoda Octavia 5E (2012-2019) Skoda Yeti 5L (2009-2017) Skoda Superb B6 (2009-2011) Skoda Superb 3V (2015 on) Volkswagen New Beetle & Cabrio (1998-2011) Volkswagen Beetle A5 (2011 on) Volkswagen Bora (1999-2005) Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010) Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on) Volkswagen Golf Mk4 1J (1997-2004) Volkswagen Golf Mk5 1K (2004-2010) Volkswagen Golf Plus 5M (2004-2010) Volkswagen Golf Mk6 5K (2009-2012) Volkswagen Golf Mk7 5G (2012-2020) Volkswagen Jetta Mk5 1K (2005-2010) Volkswagen Jetta Mk6 A6 (2011 on) Volkswagen Passat B6 & B7 Typ3C (2006-2013) Volkswagen Passat CC 35 (2008-2012) Volkswagen Scirocco Mk3 (2008 - 2017) Volkswagen Sharan Mk2 (2010 on) Volkswagen Tiguan Mk1 (2007 - 2017) Volkswagen Touran (2003-2015) Volkswagen Touran (2017 on) Volkswagen CC (2012 - 2017) Volkswagen Eos (2006-2015) Weight: 105Fitting Instructions

Name: Jacking Point Insert Kit of 4Product Notes: PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time, again recommended for use in sets of 4 simultaneously. Fits the following vehicles:Audi A3/S3 Mk1 8L (1996-2003)Audi A3/S3/RS3 Mk2 8P (2003-2012)Audi A3/S3/RS3 Mk3 8V (2013-)Audi TT Mk1 8N (1999-2006) Audi TT/S/RS Mk2 8J (2007-2014) Audi TT Mk3 8S (2014 on) Audi Q2 (2017 on) Audi Q3 (2012 - 2018) Seat Toledo Mk2 1M (1999 - 2004) Seat Toledo Mk3 5P (2004-2009) Seat Alhambra Mk2 (2010 on) Seat Leon Mk1 TYP 1M (1999-2005) Seat Leon Mk2 1P (2005-2012) Seat Leon Mk3 5F (2013 on) Skoda Octavia Mk1 Typ 1U (1996-2004) Skoda Octavia Mk2 1Z (2004-2012) Skoda Yeti 5L (2009-2017) Skoda Superb B6 (2009-2015) Skoda Superb 3V (2015 on) Volkswagen New Beetle & Cabrio (1998-2011) Volkswagen Beetle A5 (2011 on) Volkswagen Bora (1999-2005) Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010) Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on) Volkswagen Golf Mk4 1J (1997-2004) Volkswagen Golf Mk5 1K (2004-2010) Volkswagen Golf Plus 5M (2004-2010) Volkswagen Golf Mk6 5K (2009-2012) Volkswagen Golf Mk7 5G (2012-2020) Volkswagen Jetta Mk5 1K (2005-2010) Volkswagen Jetta Mk6 A6 (2011 on) Volkswagen Passat B6 & B7 Typ3C (2006-2013) Volkswagen Passat CC 35 (2008-2012) Volkswagen Scirocco Mk3 (2008 - 2017) Volkswagen Sharan Mk2 (2010 on) Volkswagen Tiguan Mk1 (2007 - 2017) Volkswagen Touran (2003-2015) Volkswagen Touran (2017 on) Volkswagen CC (2012 - 2017) Volkswagen Eos (2006-2015) Weight: 400Fitting Instructions

Name: Lower Engine Mount (Large) InsertProduct Notes: Weight: 245Fitting Instructions

Name: Lower Engine Mount (Large) InsertProduct Notes: Weight: 240Fitting Instructions

Name: Lower Engine Mount (Large) Insert DieselProduct Notes: Some NVH transmission should be expected when fitting this part to a Diesel vehicle. Weight: 240Fitting Instructions

Name: Lower Engine Mount (Large) Insert Track UseProduct Notes: Made in Purple 80A and suitable for higher powered cars and track cars, this part helps to further reduce engine movement over fitting the standard PFF85-832 insert. Increased NVH may be felt when fitted. Weight: 240Fitting Instructions