Seat

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201GBLK boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

Name: Front Wishbone Inner Bush (front)Product Notes: Weight: 157

Name: Front Wishbone Inner Bush (front)Product Notes: Weight: 157

Name: Front Wishbone Inner Bush (rear)Product Notes: Weight: 618Fitting Instructions

Name: Front Wishbone Inner Bush (rear)Product Notes: Weight: 618Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Weight: 479Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: PFF85-2002 Front Wishbone Rear Bush features a plated outer shell for a secure fitment in the wishbone and a better distribution of load under braking, and a chamfered sleeve to assist articulation and further improve performance and durability, making it a great upgrade for fast road cars or to replace the commonly worn OEM bush. This new part combines perfectly with ourPFF85-201BLKFront Wishbone Front Bushto further improveyour car's steering precision and braking response. Bush Size: 60mmWeight: 900Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: PFF85-2002 Front Wishbone Rear Bush features a plated outer shell for a secure fitment in the wishbone and a better distribution of load under braking, and a chamfered sleeve to assist articulation and further improve performance and durability, making it a great upgrade for fast road cars or to replace the commonly worn OEM bush. This new part combines perfectly with ourPFF85-201Front Wishbone Front Bushto further improveyour car's steering precision and braking response. Bush Size: 60mmWeight: 900Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G. Bush Size: 65mmWeight: 1059Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902GBLK. Bush Size: 65mmWeight: 1059Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Weight: 534Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Weight: 534Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: For the Audi A2, PFF85-602 fits aluminium and pressed steel arms only as fitted to the 1.2 models and later 1.4/1.6 models. It will not fit the cast steel arms as fitted to early 1.4/1.6 models. Weight: 565Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: A2 models fitting advised for aluminium arms only and will not fit cast steel arms on these models. For a caster offset version of this bush please use PFF85-602GBLK. Weight: 565Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Made in our Black 95A material with a tapered bore to reduce stress during articulation, this bush fits vehicles with the combination of an aluminium subframe (OE Part No. 5Q0199369, 5WA199369A and 3Q0199369E) and pressed-steel wishbones only. For vehicles with a steel subframe, please use PFF85-802. For vehicles requiring further on-car caster adjustment, please use PFF3-902G. Weight: 1219

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PABLK and for cast arms use PFF3-610BLK. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Weight: 479Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Weight: 534Fitting Instructions

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G-5 is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1925Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1900Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1798Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. A2 models fitting advised for aluminium arms only and will not fit cast steel arms on these models. PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. Aimed at offering greater precision with improved geometry for people wanting the very best from their vehicle. This new part, fitted to the rear of the front wishbone has a hard-anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are improved geometry when turning giving additional grip, steering control and feel with less movement in the arm under cornering and braking. In our Road Series Purple material, stiffness is boosted by almost 100% over the original part, whilst our Black Series part increases stiffness by another 100%. Weight: 723Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. A2 models fitting advised for aluminium arms only and will not fit cast steel arms on these models. PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. Aimed at offering greater precision with improved geometry for people wanting the very best from their vehicle. This new part, fitted to the rear of the front wishbone has a hard-anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are improved geometry when turning giving additional grip, steering control and feel with less movement in the arm under cornering and braking. In our Road Series Purple material, stiffness is boosted by almost 100% over the original part, whilst our Black Series part increases stiffness by another 100%. Weight: 723Fitting Instructions