Seat

Name: Front Lower Engine Mounting Bush & InsertsProduct Notes: PFF85-280 is a replacement bush kit that includes inserts that are designed to fit into voids in the bush, allowing tune-ability of engine movement, perfect for stiffening mounts ahead of track days and performance events. This part replaces OE numbers: 1H0199609 K,E,F,B,J,G & J. - On the VW Corrado & Passat the mount will only fit models with the V6 engine. Weight: 626Fitting Instructions

Name: Front Lower Engine Mounting Bush & InsertsProduct Notes: PFF85-280 is a replacement bush kit that includes inserts that are designed to fit into voids in the bush, allowing tune-ability of engine movement, perfect for stiffening mounts ahead of track days and performance events. This part replaces OE numbers: 1H0199609 K,E,F,B,J,G & J. - On the VW Corrado & Passat the mount will only fit models with the V6 engine. Weight: 626Fitting Instructions

Name: Front Strut Top MountProduct Notes: VW Corrado Does not fit G60 Model. Fits VR6 (ABV) models from chassis 50_N 000 001 and all other models from chassis 50-S-000 052. Seat Cordoba - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards. VW Golf Mk3 Fits models from 1992 to 1996 with 5 stud wheels only, this includes GTi, GTi 16v & VR6. From 1996 to 1998 they fit all Mk3 Golfs. VW Vento - Fits models from 1992 to 1996 with 5 stud wheels only. From 1996 to 1998 they fit all models. Seat Toledo - Fits 1992-1999 models with chassis number 1L-TR000 001 onwards. Seat Ibiza 6K - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards. Weight: 735

Name: Front Strut Top MountProduct Notes: VW Corrado Does not fit G60 Model. Fits VR6 (ABV) models from chassis 50_N 000 001 and all other models from chassis 50-S-000 052. Seat Cordoba - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards. VW Golf Mk3 Fits models from 1992 to 1996 with 5 stud wheels only, this includes GTi, GTi 16v & VR6. From 1996 to 1998 they fit all Mk3 Golfs. VW Vento - Fits models from 1992 to 1996 with 5 stud wheels only. From 1996 to 1998 they fit all models. Seat Toledo - Fits 1992-1999 models with chassis number 1L-TR000 001 onwards. Seat Ibiza 6K - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards. Weight: 735

Name: Front Strut Top MountProduct Notes: VW Corrado Does not fit G60 Model. Fits VR6 (ABV) models from chassis 50_N 000 001 and all other models from chassis 50-S-000 052. Seat Cordoba - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards. VW Golf Mk3 Fits models from 1992 to 1996 with 5 stud wheels only, this includes GTi, GTi 16v & VR6. From 1996 to 1998 they fit all Mk3 Golfs. VW Vento - Fits models from 1992 to 1996 with 5 stud wheels only. From 1996 to 1998 they fit all models. Seat Toledo - Fits 1992-1999 models with chassis number 1L-TR000 001 onwards. Seat Ibiza 6K - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards. Weight: 735

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430H. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430BLK. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush WasherProduct Notes: PFF85-431W Front Strut Top Spacer (as normally supplied with PFF85-431 and now available separately) is a simple and cost-effective interim solution that fits and works with the OE Strut Top Cap to fill the gap and prevents binding up on the PU Spacer as the suspension turns. Fitting couldnt be easier either. Simply remove the existing Strut Top Cap from the car, separate the rubber ring from it, press the Cap into our Spacer and then refit it! NB; fitting this part is only recommended if the installed Top Mount is in good condition and there is a gap of at least 12mm between the top cap and body. If the OE mount has collapsed, you will need to replace the entire mount with PFF85-430 or PFF85-431. Bush Size: 18mmWeight: 112

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Tie Bar Inner BushProduct Notes: Weight: 1492Fitting Instructions

Name: Front Upper Control Arm BushProduct Notes: Weight: 541Fitting Instructions

Name: Front Upper Control Arm Bush - Camber AdjProduct Notes: PFF3-203G allows you to fine-tune the front camber/caster/toe. Perfect for dialling in the alignment, improving the handling and minimizing tyre wear. The offset sleeve allows up to +/- 0.3 of camber adjustment. Weight: 714Fitting Instructions

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mm Camber AdjustableProduct Notes: This bush features a CNC-machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the smaller 30mm bush, please use part no. PFF85-201G. CNC machined stainless steel sleeve with knurled end pattern to prevent unwanted rotation.Rotate to adjust camber. Bush Size: 45.5mm DiameterWeight: 639Fitting Instructions

Name: Front Wishbone (Cast) Front Bush 45mm Camber AdjustableProduct Notes: This bush features a CNC-machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the smaller 30mm bush, please use part no. PFF85-201GBLK. CNC machined stainless steel sleeve with knurled end pattern to prevent unwanted rotation.Rotate to adjust camber. Bush Size: 45.5mm DiameterWeight: 639Fitting Instructions

Name: Front Wishbone (Cast) Rear BushProduct Notes: Fits the Cast Front Wishbone. Weight: 510Fitting Instructions

Name: Front Wishbone (Cast) Rear BushProduct Notes: Fits the Cast Front Wishbone. Weight: 510Fitting Instructions

Name: Front Wishbone (Cast) Rear BushProduct Notes: Fits the Cast Front Wishbone. Weight: 510Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: For a camber adjustable bush use PFF85-501G. Weight: 451

Name: Front Wishbone Front BushProduct Notes: Weight: 451

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201G boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions