Powerflex

Der det skal være flere en 1 stk på bilen så er disse priset pr stk så her må en legge i handle vogn det antallet bilen trenger. Send oss gjerne en mail info@koolart.no

Hjulopphengsbøssinger er noen av de mest belastede komponentene som er montert på en bil. De utsettes for enorme belastninger og under de mest krevende forhold uten vedlikehold eller smøring.

Materialet de er produsert av er en gummiblanding som inneholder naturlige produkter som forringes med alderen. 
Den blir mykere og mer smidig, og motstår kreftene som utsettes for den mindre og mindre. Dermed tillater den mer og mer bevegelse av fjæringskomponenter og gir mindre og mindre kontroll over fjæringsgeometrien.

Dette fører igjen til akselerert dekkslitasje, ustabilitet i bremser og dårlig håndtering. Dette er den største grunnen til at du umiddelbart kan se forskjellen når du kjører en tre år gammel bil sammenlignet med en ny bil fra utstillingslokalet. 
Imidlertid vil selv nye biler dra nytte av POWERFLEX-bøssinger på grunn av den overlegne designen. 
De gir mye mer effektiv kontroll over fjæringskomponentene i mye større grad enn vanlige gummideler.

Med de teknologiske fremskrittene i dette materialet har det vært mulig å overvinne det vanlige problemet forbundet med hardere bøssinger, som er økt støy. 
Ved riktig konstruering av polyuretanblandingen kan bøssinger gjøres 25–30 % stivere enn nye gummideler, men med nøyaktig de samme støydempende egenskapene.

POWERFLEX-bøssinger gir mening.POWERFLEX for forbedret ytelse.POWERFLEX for økt sikkerhet.POWERFLEX for lengre dekklevetid.

Lower Torque Mount Insert

Name: Lower Torque Mount Insert Product Notes: Weight: 80

450.-

Lower Torque Mount Insert

Name: Lower Torque Mount InsertProduct Notes: PFF76-920BLK Torque Mount Bush Insert is an affordable and easy-to-fit bush insert made from our Black 95A Durometer high-performance material, which works to significantly stiffen the OEM torque mounting for performance on the race circuit or the rally stage. This reduces the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel, as well as reducing wheel-hop and improving traction. PFF76-920BLK can be fitted alone but will perform most effectively when fitted with our other powertrain inserts (PFF76-923BLK & PFF76-925BLK) as a full set. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Our POWERFLEX PFF76-920 Lower Torque Mount increases the stiffness of the OEM powertrain mounts using our Black 95A material. Weight: 65Fitting Instructions

500.-

Lower Torque Mount Insert

Name: Lower Torque Mount InsertProduct Notes: PFF76-920 Torque Mount Bush Insert is an affordable and easy-to-fit bush insert made from our Yellow 70A Durometer vibration-absorbing material, which works to stiffen the OEM torque mounting. This reduces the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel, as well as reducing wheel-hop and improving traction. PFF76-920can be fitted alone but will perform most effectively when fitted with our other powertrain inserts (PFF76-923 & PFF76-925) as a full set. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Our POWERFLEX PFF76-920 Lower Torque Mount increases the stiffness of the OEM powertrain mounts using our yellow 70A material. Weight: 65Fitting Instructions

460.-

Lower Torque Mount Large Bush (Fast Road)

Name: Lower Torque Mount Large Bush (Fast Road)Product Notes: PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922. Weight: 596Fitting Instructions

980.-

Lower Torque Mount Large Bush (Motorsport)

Name: Lower Torque Mount Large Bush (Motorsport)Product Notes: PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922. Weight: 596Fitting Instructions

1080.-

Lower Torque Mount Large Bush (Tuned/Track)

Name: Lower Torque Mount Large Bush (Tuned/Track)Product Notes: PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922. Weight: 596Fitting Instructions

980.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush InsertProduct Notes: Made in our softer Red 65A durometer material in consideration of Ford's 3-Cylinder engine, this is a cost-effective and easy-to-fit insert, designed to sharpen throttle response and add more precision to gear changes; whilst reducing wheel-hop and improving the durability and longevity of the OE mount. Weight: 143

460.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush InsertProduct Notes: Made in our Black 95A material this is a cost-effective and easy-to-fit insert, designed to sharpen throttle response and add more precision to gear changes; whilst reducing wheel-hop and improving the durability and longevity of the OE mount. Weight: 143

500.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert.In our Red 65 Shore A material, the movement of the engine mount is reduced by almost half for a given load by the engine.For ultimate engine stability we recommend using our complete engine mount PFF19-2222. Weight: 75

460.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert.In our Black Series 95 Shore A material, the movement of the engine mount is reduced by almost three times for a given load by the engine.For ultimate engine stability we recommend using our complete engine mount PFF19-2222. Weight: 75

500.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: PFF19-2225 is an insert only that fits into the original engine mount for reduced engine movement. For a complete mount including bushes please use PFF19-2223. Fits models with the 1.0 Ecoboost engine only. Weight: 95

510.-

Lower Torque Mount Large Bush Insert

460.-

Lower Torque Mount Large Bush Insert (Motorsport)

Name: Lower Torque Mount Large Bush Insert (Motorsport)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923. Weight: 60Fitting Instructions

500.-

Lower Torque Mount Large Bush Insert (Motorsport)

Name: Lower Torque Mount Large Bush Insert (Motorsport)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering Weight: 61Fitting Instructions

510.-

Lower Torque Mount Large Bush Insert (Standard)

Name: Lower Torque Mount Large Bush Insert (Standard)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923. Weight: 60Fitting Instructions

460.-

Lower Torque Mount Large Bush Insert (Standard)

Name: Lower Torque Mount Large Bush Insert (Standard)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering Weight: 61Fitting Instructions

460.-

Lower Torque Mount Large Bush Insert (Tuned/Track)

Name: Lower Torque Mount Large Bush Insert (Tuned/Track)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923. Weight: 60Fitting Instructions

460.-

Lower Torque Mount Large Bush Insert (Tuned/Track)

Name: Lower Torque Mount Large Bush Insert (Tuned/Track)Product Notes: Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement. PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering Weight: 61Fitting Instructions

460.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: This part fits 1.5L Ecoboost ST 200 models only with 40mm wide bush. Bush Size: 40mmWeight: 112

550.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small Bush Product Notes: This part fits 1.5L Ecoboost ST 200 models only with 40mm wide bush. Bush Size: 40mmWeight: 112

510.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 0

640.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

530.-

Lower Torque Mount Small Bush

530.-

Lower Torque Mount Small Bush

640.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325BLK Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

510.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

510.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

680.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

680.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

530.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

530.-

Lower Torque Mount Small Bush 12mm

Name: Lower Torque Mount Small Bush 12mmProduct Notes: Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120. Bush Size: 12mmWeight: 236Fitting Instructions

570.-

Lower Torque Mount Small Bush 12mm

570.-

Viser 2913 til 2944 (av 5504 produkter)

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Oppgrader bilen med kvalitetsforinger fra Powerflex – utviklet for deg som ønsker bedre respons, mer stabilitet og lengre holdbarhet enn originale gummiforinger. Powerflex polyuretanforinger gir redusert fleks i understell og oppheng, noe som forbedrer både styringsfølelse, veigrep og kjøreegenskaper.

Powerflex er kjent for høy kvalitet og produserer foringer til en rekke bilmodeller, både for gatebruk, sportslig kjøring og bane. Polyuretanmaterialet er betydelig mer slitesterkt enn tradisjonelle gummiforinger og tåler belastning, olje, salt og vær langt bedre.

Fordeler med Powerflex foringer:

Bedre stabilitet og styrerespons
Redusert slark i understell og oppheng
Lengre levetid enn originale gummiforinger
Mer presis og sportslig kjørefølelse
Motstandsdyktig mot slitasje og deformasjon
Enkel montering på mange modeller

Slitte originale foringer kan føre til dårligere kjøreegenskaper, unormal dekkslitasje og ustabil bil. Ved å montere Powerflex foringer får bilen et fastere og mer presist understell som gir bedre kontroll både på landevei og ved aktiv kjøring.

Vi tilbyr Powerflex foringer til en rekke bilmerker og modeller – blant annet bærearmsforinger, stabilisatorforinger, motorfester og komplette foringssett. Enten du bygger showbil, senket bil eller ønsker å forbedre originalfølelsen, er Powerflex et populært valg blant entusiaster og verksteder verden over.

Powerflex

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Fordeler med Powerflex foringer:

Kontakt info

Info

Kundeservice

Totalt:

Powerflex

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Fordeler med Powerflex foringer:

Totalt:

DB9

100 - 200 (1976 - 1991)

80 - 90 - inc S2-RS2 & Quattro (1976 - 2000)

A1 - S1 (2010 on)

A3 - S3 - RS3

A4 - S4 - RS4

A5 - S5 - RS5

A6 - S6 - RS6

A7 - S7 - RS7

A8 - S8

Q2 (2017 - On)

Q3 - RSQ3

Q5 - SQ5

Q7

TT Models

02 Series

1 Series

2 Series

3 Series

4 Series

5 Series

6 Series

7 Series

8 Series

X Series

Z Series

7 (DeDion with Watts Linkage)

7 (DeDion without Watts Linkage)

Berlingo Models

C3 Models

C4 Models

C5 Models

DS5 Models

500 Models

Panda

Punto

C-Max Models

Escort Models

Fiesta Models

Focus Models

Galaxy Models

KA Models

Kuga Models

Mondeo Models

Puma

Sierra Models

Transit

Civic Models

CR-V Models

CR-X Models

Integra Models

Jazz - Fit Models

Accent Models

Coupe Models

Elantra Models

i10 Models

i20 Models

i30 Models

Santa Fe Models

Sonata Models

Tucson - iX35 Models

Veloster Models

Cee'd-Proceed-XCeed Models

Cerato Models

Soul Models

Sportage Models

Defender

Discovery

Freelander

Range Rover inc Sport, Evoque & Classic

Elise (1996 - 2021)

Exige (2000 - 2021)

Mazda 3

MX-5, Miata, Eunos

C-CLASS

CLK