Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Hjem / Powerflex

Powerflex

Powerflex - Road Series

 

Der det skal være flere en 1 stk på bilen så er disse priset pr stk så her må en legge i handle vogn det antallet bilen trenger.  Send oss gjerne en mail info@koolart.no 

Hjulopphengsbøssinger er noen av de mest belastede komponentene som er montert på en bil. De utsettes for enorme belastninger og under de mest krevende forhold uten vedlikehold eller smøring.

Materialet de er produsert av er en gummiblanding som inneholder naturlige produkter som forringes med alderen. 
Den blir mykere og mer smidig, og motstår kreftene som utsettes for den mindre og mindre. Dermed tillater den mer og mer bevegelse av fjæringskomponenter og gir mindre og mindre kontroll over fjæringsgeometrien.

Dette fører igjen til akselerert dekkslitasje, ustabilitet i bremser og dårlig håndtering. Dette er den største grunnen til at du umiddelbart kan se forskjellen når du kjører en tre år gammel bil sammenlignet med en ny bil fra utstillingslokalet. 
Imidlertid vil selv nye biler dra nytte av POWERFLEX-bøssinger på grunn av den overlegne designen. 
De gir mye mer effektiv kontroll over fjæringskomponentene i mye større grad enn vanlige gummideler.

Med de teknologiske fremskrittene i dette materialet har det vært mulig å overvinne det vanlige problemet forbundet med hardere bøssinger, som er økt støy. 
Ved riktig konstruering av polyuretanblandingen kan bøssinger gjøres 25–30 % stivere enn nye gummideler, men med nøyaktig de samme støydempende egenskapene.

POWERFLEX-bøssinger gir mening.POWERFLEX for forbedret ytelse.POWERFLEX for økt sikkerhet.POWERFLEX for lengre dekklevetid.
Hovedbilde Front Arm Rear Bush - Caster Adjust
Front Arm Rear Bush - Caster Adjust

Name: Front Arm Rear Bush - Caster AdjustProduct Notes: Made in our Purple 80A durometer material and bonded into a plated-steel outer shell, these bushes offer a range +/-0.33 deg of caster adjustment. Weight: 857Fitting Instructions

890.-

Hovedbilde Front Arm Rear Bush - Caster Adjust
Front Arm Rear Bush - Caster Adjust

Name: Front Arm Rear Bush - Caster AdjustProduct Notes: Made in our Grey 80A durometer material and bonded into a plated-steel outer shell, these bushes offer a range +/-0.33 deg of caster adjustment. Weight: 857Fitting Instructions

890.-

Hovedbilde Front Arm Rear Bush - Caster Adjust
Front Arm Rear Bush - Caster Adjust

Name: Front Arm Rear Bush - Caster AdjustProduct Notes: Made in our Black 95A durometer material and bonded into a plated-steel outer shell, these bushes offer a range +/-0.33 deg of caster adjustment. Weight: 857Fitting Instructions

980.-

Hovedbilde Front Arm Rear Bush Anti-Lift & Caster Adjust
Front Arm Rear Bush Anti-Lift & Caster Adjust

Name: Front Arm Rear Bush Anti-Lift & Caster AdjustProduct Notes: Designed around our unique on-car adjustable Nylon/Polyurethane ball-joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.33 of caster adjustment with a supplied spanner to assist the fine-tuning of the cars wheel geometry. Does not fit arms K04670544AE, K04670545AE, K04877742AD and K04877743AD as fitted to US models. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment.Weight: 1044Fitting Instructions

1380.-

Hovedbilde Front Arm Rear Bush Anti-Lift & Caster Offset
Front Arm Rear Bush Anti-Lift & Caster Offset

Name: Front Arm Rear Bush Anti-Lift & Caster Offset Product Notes: Offers anti-dive and anti-lift characteristics and increases caster by 0.5 deg. It comes complete with the bush, alloy bracket, bolt and washers. Weight: 529Fitting Instructions

800.-

Hovedbilde Front Arm Rear Bush Anti-Lift & Caster Offset
Front Arm Rear Bush Anti-Lift & Caster Offset

Name: Front Arm Rear Bush Anti-Lift & Caster Offset Product Notes: Offers anti-dive and anti-lift characteristics and increases caster by 0.5 deg. It comes complete with the bush, alloy bracket, bolt and washers. Weight: 529Fitting Instructions

800.-

Hovedbilde Front Arm Rear Bush Camber Adjustable
Front Arm Rear Bush Camber Adjustable

Name: Front Arm Rear Bush Camber AdjustableProduct Notes: With the track-day enthusiast in mind,PFF25-302G Front Arm Rear Bush Camber Adjustable is made in our Black 95A material and has a CNC machined stainless steel sleeve with off-set bore that can be rotated with the supplied spannerto provide +/- 0.5 degrees of camber adjustment. Ideal for thoselooking for on-car camber tuneability. Weight: 600Fitting Instructions

1000.-

Hovedbilde Front Arm Rear Bush Camber Adjustable
Front Arm Rear Bush Camber Adjustable

Name: Front Arm Rear Bush Camber AdjustableProduct Notes: With the track-day enthusiast in mind,PFF25-302G Front Arm Rear Bush Camber Adjustable is made in our Black 95A material and has a CNC machined stainless steel sleeve with off-set bore that can be rotated with the supplied spannerto provide +/- 0.5 degrees of camber adjustment. Ideal for thoselooking for on-car camber tuneability. Weight: 600Fitting Instructions

1000.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF5-1302G is a CNC-machined mount with polyurethane bush providing approx 1 deg of caster offset to improve in-corner camber gain without compromising straight-line traction. It has a knurled body to retain grease and allow free rotation of the bush, preventing torsional twist in the bush material, aiding performance, reliability and increasing longevity. PFF5-1302G has a knurled pattern body to retain grease and allow free rotation of the bush. This prevents torsional twist in the bush material, aiding performance, reliability and increasing longevity. Weight: 1012Fitting Instructions

1370.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF5-1302G is a CNC-machined mount with polyurethane bush providing approx 1 deg of caster offset to improve in-corner camber gain without compromising straight-line traction. It has a knurled body to retain grease and allow free rotation of the bush, preventing torsional twist in the bush material, aiding performance, reliability and increasing longevity. PFF5-1302G has a knurled pattern body to retain grease and allow free rotation of the bush. This prevents torsional twist in the bush material, aiding performance, reliability and increasing longevity. Weight: 1012Fitting Instructions

1500.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF80-1102 Front Arm Rear Bush Caster Adjust has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0 of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased considerably over standard rubber. Suitable for Road and Black Series applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1434Fitting Instructions

1550.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF80-1102BLK Front Arm Rear Bush Caster Adjust has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0 of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased considerably over standard rubber. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1434Fitting Instructions

1550.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster Offset Product Notes: PFF60-902G provides a fixed 4mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-offset version of this bush please use PFF60-902. Weight: 781Fitting Instructions

880.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF60-902G provides a fixed 4mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-offset version of this bush please use PFF60-902. Weight: 781Fitting Instructions

800.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: This part fits the cast aluminium arm only as fitted to the RS models. It features two steel outer shells to dissipate energy and increase the stiffness of the bush. Additional caster offset of 0.6 provided by the offset stainless steel sleeve. For a non-adjustable version of this bush please use PFF60-702BLK Weight: 1413Fitting Instructions

1080.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: This part provides 0.6 degrees of additional caster offset and also gives additional anti lift for improved traction. For a non adjustable bush use PFF60-802. Weight: 925Fitting Instructions

880.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: This part provides 0.6 degrees of additional caster offset and also gives additional anti lift for improved traction. For a non adjustable bush use PFF60-802. Weight: 925Fitting Instructions

970.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: This part provides additional caster offset. For a non adjustable bush use PFF60-501. Weight: 775Fitting Instructions

800.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: This part fits the cast aluminium arm only as fitted to the RS models. It features two steel outer shells to dissipate energy and increase the stiffness of the bush. Additional caster offset of 0.6 provided by the offset stainless steel sleeve. For a non-adjustable version of this bush please use PFF60-702. Weight: 1413Fitting Instructions

1080.-

Hovedbilde Front Arm Rear Bush Caster Offset
Front Arm Rear Bush Caster Offset

Name: Front Arm Rear Bush Caster OffsetProduct Notes: This part provides additional caster offset. For a non adjustable bush use PFF60-501. Weight: 775Fitting Instructions

880.-

Hovedbilde Front Arm Rear Bush, Caster Adjustable
Front Arm Rear Bush, Caster Adjustable

Name: Front Arm Rear Bush, Caster AdjustableProduct Notes: This bush allows on-car adjustment of the Caster angle +/- 0.33 deg. Use PFF73-402 if you do not want any adjustment. Weight: 501Fitting Instructions

1420.-

Hovedbilde Front Arm Rear Bush, Caster Adjustable
Front Arm Rear Bush, Caster Adjustable

Name: Front Arm Rear Bush, Caster AdjustableProduct Notes: This bush allows on-car adjustment of the Caster angle +/- 0.33 deg. Use PFF73-402BLK if you do not want any adjustment. Weight: 708Fitting Instructions

1570.-

Hovedbilde Front Arm Rear Bush, Caster Adjustable
Front Arm Rear Bush, Caster Adjustable

Name: Front Arm Rear Bush, Caster AdjustableProduct Notes: On-car caster adjustable bush, gives +/- 0.33 degrees of adjustment. Suitable for Road and Black Series Applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1107Fitting Instructions

1600.-

Hovedbilde Front Arm Rear Bush, Caster Adjustable
Front Arm Rear Bush, Caster Adjustable

Name: Front Arm Rear Bush, Caster AdjustableProduct Notes: On-car caster adjustable bush, gives +/- 0.33 degrees of adjustment. Suitable for Road and Black Series Applications. Using aBlack 95A durometer ball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1107Fitting Instructions

1600.-

Hovedbilde Front Arm Rear Bush, Caster Adjustable
Front Arm Rear Bush, Caster Adjustable

Name: Front Arm Rear Bush, Caster AdjustableProduct Notes: This bush allows +/- 0.6 degrees of caster adjustment. For a non adjustable bush use PFF85-1302. Weight: 1087Fitting Instructions

980.-

Hovedbilde Front Arm Rear Bush, Caster Adjustable
Front Arm Rear Bush, Caster Adjustable

Name: Front Arm Rear Bush, Caster Adjustable Product Notes: This bush allows +/- 0.6 degrees of caster adjustment. For a non adjustable bush use PFF85-1302BLK. Weight: 1087 Fitting Instructions

1080.-

Hovedbilde Front Arm Rear Bush, On-Car Caster & Anti Lift
Front Arm Rear Bush, On-Car Caster & Anti Lift

Name: Front Arm Rear Bush, On-Car Caster & Anti LiftProduct Notes: This bush offers on-car adjustable caster and additional anti lift properties. Caster adjustment range 1.5. For a standard non adjusted bush use PFF25-402. Fits into 51350-T5R-A00 right lower arm and 51360-T5R-A00 left lower arm Weight: 1035Fitting Instructions

1620.-

Viser 1441 til 1472 (av 5504 produkter)

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Oppgrader bilen med kvalitetsforinger fra Powerflex – utviklet for deg som ønsker bedre respons, mer stabilitet og lengre holdbarhet enn originale gummiforinger. Powerflex polyuretanforinger gir redusert fleks i understell og oppheng, noe som forbedrer både styringsfølelse, veigrep og kjøreegenskaper.

Powerflex er kjent for høy kvalitet og produserer foringer til en rekke bilmodeller, både for gatebruk, sportslig kjøring og bane. Polyuretanmaterialet er betydelig mer slitesterkt enn tradisjonelle gummiforinger og tåler belastning, olje, salt og vær langt bedre.

Fordeler med Powerflex foringer:

  • Bedre stabilitet og styrerespons
  • Redusert slark i understell og oppheng
  • Lengre levetid enn originale gummiforinger
  • Mer presis og sportslig kjørefølelse
  • Motstandsdyktig mot slitasje og deformasjon
  • Enkel montering på mange modeller

Slitte originale foringer kan føre til dårligere kjøreegenskaper, unormal dekkslitasje og ustabil bil. Ved å montere Powerflex foringer får bilen et fastere og mer presist understell som gir bedre kontroll både på landevei og ved aktiv kjøring.

Vi tilbyr Powerflex foringer til en rekke bilmerker og modeller – blant annet bærearmsforinger, stabilisatorforinger, motorfester og komplette foringssett. Enten du bygger showbil, senket bil eller ønsker å forbedre originalfølelsen, er Powerflex et populært valg blant entusiaster og verksteder verden over.

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

Kontakt info

info@koolart.no
Telefon 40204030 M-F 10.00-16.00

Koolart John Martin Sandvik
Evjetun 6
3470 Slemmestad Norge

Info
Kundeservice

Nyhetsbrev

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png

Velkommen til Koolart Nettbutikk!

Vi tilbyr et bredt utvalg av bilutstyr som felger, dekk, ekstralys, bil- og båtsystemer, samt heve- og senkesett. I vårt eget verksted kan vi montere alt fra lys til lydsystemer, med produkter fra de mest anerkjente merkene.

Hos Koolart får du både produkter av høy kvalitet og profesjonell montering. Besøk oss, og la oss hjelpe deg med å tilpasse bilen eller båten din akkurat slik du ønsker!

 

Føl oss på sosiale medier

Følg oss på facebook koolart.no Følg oss på instagram

Dette nettstedet bruker informasjonskapsler for å fungere korrekt, analysere trafikk, personalisering av annonser og annonsering.
Drevet av Powered by Mystore
Juster innstillingene