Jetta Models

Name: Front Anti Roll Bar Outer Bush 22mmProduct Notes: Fits 22mm aftermarket anti-roll bars Bush Size: 22mmWeight: 67

Name: Front Anti Roll Bar Outer Mount 16mmProduct Notes: Bush Size: 16mmWeight: 68

Name: Front Anti Roll Bar Outer Mount 16mmProduct Notes: Bush Size: 16mmWeight: 68

Name: Front Anti Roll Bar Outer Mount 16mmProduct Notes: Bush Size: 16mmWeight: 68

Name: Front Anti Roll Bar Outer Mount Eibach 20.5mmProduct Notes: Bush Size: 20.5mmWeight: 68

Name: Front Anti Roll Bar Outer Mount Eibach 20.5mmProduct Notes: Bush Size: 20.5mmWeight: 68

Name: Front Anti Roll Bar Outer Mount Eibach 20.5mmProduct Notes: Bush Size: 20.5mmWeight: 68

Name: Front Bump StopProduct Notes: The OE dust cover fits this bump stop. Bush Size: 54mm x 59mm x 19mmWeight: 205Fitting Instructions

Name: Front Cross Member Mounting BushProduct Notes: Weight: 244

Name: Front Cross Member Mounting BushProduct Notes: Weight: 244

Name: Front Cross Member Mounting BushProduct Notes: Weight: 244

Name: Front Engine Mount Dog Bone (Diesel)Product Notes: Made in our softer Red 65A material, PFF85-420R is intended for standard diesel vehicles. For petrol or modified diesel vehicles, please use PFF85-420. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Diesel)Product Notes: Made in our softer Grey 65A material, PFF85-420R is intended for standard diesel vehicles. For petrol or modified diesel vehicles, please use PFF85-420. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Motorsport)Product Notes: Made in our hardest Black 95A material, this product is best suited to Track / Motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Petrol/Tuned Diesel)Product Notes: Made in our Grey 70A material, PFF85-420 is intended for petrol or tuned diesel vehicles. For significantly tuned petrol or diesel vehicles, or those being used on track, please use PFF85-420BLK. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated part PFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Petrol/Tuned Diesel)Product Notes: Made in our Yellow 70A material, PFF85-420 is intended for petrol or tuned diesel vehicles. For significantly tuned petrol or diesel vehicles, or those being used on track, please use PFF85-420BLK. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated part PFF85-505 Weight: 239

Name: Front Eye Bolt Mounting Bush 10mmProduct Notes: Fits drop links with a 10mm diameter shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models. Bush Size: 10mmWeight: 144

Name: Front Eye Bolt Mounting Bush 10mmProduct Notes: Fits drop links with a 10mm diameter shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models. Bush Size: 10mmWeight: 144

Name: Front Eye Bolt Mounting Bush 10mmProduct Notes: Fits drop links with a 10mm diameter shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models. Bush Size: 10mmWeight: 144

Name: Front Eye Bolt Mounting Bush 12mmProduct Notes: Fits drop links with a 12mm shaft. For 10mm shafts use PFF85-208-10. Not Suitable For VR6 - Models and GT Models with chassis codes AAA, AGG & AKR (VW Vento). Bush Size: 12mmWeight: 173

Name: Front Eye Bolt Mounting Bush 12mmProduct Notes: Fits drop links with a 12mm shaft. For 10mm shafts use PFF85-208-10. Not Suitable For VR6 - Models and GT Models with chassis codes AAA, AGG & AKR (VW Vento). Bush Size: 12mmWeight: 173

Name: Front Eye Bolt Mounting Bush 12mmProduct Notes: Fits drop links with a 12mm shaft. For 10mm shafts use PFF85-208-10. Not Suitable For VR6 - Models and GT Models with chassis codes AAA, AGG & AKR (VW Vento). Bush Size: 12mmWeight: 173

Name: Front Lower Engine Mount Hybrid Bush (Large) - Fast Road/TrackProduct Notes: PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . Weight: 493Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Fast Road/TrackProduct Notes: PFF85-831P replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. This part is made in our Purple Shore A 80 for vehicles running increased power or that see occasional track use. Weight: 519Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - RoadProduct Notes: PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . Weight: 493Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - RoadProduct Notes: PFF85-831 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. Weight: 519Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Track/MSportProduct Notes: PFF85-831 replaces the lower half of the original bush OEM part number 5Q0 198 037 / 5Q0 198 037 A and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fitted without subframe removal from the vehicle and avoids associated wheel alignment costs. Weight: 519Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Track/MSport Product Notes: PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. Weight: 493Fitting Instructions

Name: Front Lower Engine Mounting Bush & InsertsProduct Notes: PFF85-280 is a replacement bush kit that includes inserts that are designed to fit into voids in the bush, allowing tune-ability of engine movement, perfect for stiffening mounts ahead of track days and performance events. This part replaces OE numbers: 1H0199609 K,E,F,B,J,G & J. - On the VW Corrado & Passat the mount will only fit models with the V6 engine. Weight: 626Fitting Instructions

Name: Front Lower Engine Mounting Bush & InsertsProduct Notes: PFF85-280 is a replacement bush kit that includes inserts that are designed to fit into voids in the bush, allowing tune-ability of engine movement, perfect for stiffening mounts ahead of track days and performance events. This part replaces OE numbers: 1H0199609 K,E,F,B,J,G & J. - On the VW Corrado & Passat the mount will only fit models with the V6 engine. Weight: 626Fitting Instructions

Name: Front Lower Engine Mounting Bush & InsertsProduct Notes: PFF85-280 is a replacement bush kit that includes inserts that are designed to fit into voids in the bush, allowing tune-ability of engine movement, perfect for stiffening mounts ahead of track days and performance events. This part replaces OE numbers: 1H0199609 K,E,F,B,J,G & J. - On the VW Corrado & Passat the mount will only fit models with the V6 engine. Weight: 626Fitting Instructions

Name: Front Strut Top MountProduct Notes: VW Corrado Does not fit G60 Model. Fits VR6 (ABV) models from chassis 50_N 000 001 and all other models from chassis 50-S-000 052. Seat Cordoba - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards. VW Golf Mk3 Fits models from 1992 to 1996 with 5 stud wheels only, this includes GTi, GTi 16v & VR6. From 1996 to 1998 they fit all Mk3 Golfs. VW Vento - Fits models from 1992 to 1996 with 5 stud wheels only. From 1996 to 1998 they fit all models. Seat Toledo - Fits 1992-1999 models with chassis number 1L-TR000 001 onwards. Seat Ibiza 6K - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards. Weight: 735