Jetta Models

Name: Lower Engine Mount Insert (Large) TrackProduct Notes: Made using our Purple 80A material, PFF85-704P is recommended for track driven and higher-tuned vehicles from mid-2008 on. For vehicles up to mid-2008 use PFF85-504.Being a stiffer material additional NVH may be experienced when fitting this part. Weight: 251Fitting Instructions

Name: Lower Engine Mount Insert (Large) Track UseProduct Notes: Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF85-830 insert, being a stiffer material additional noise and vibration may be felt. Weight: 240Fitting Instructions

Name: Lower Engine Mount Small BushProduct Notes: Weight: 178Fitting Instructions

Name: Lower Engine Mount Small Bush Product Notes: Weight: 178 Fitting Instructions

Name: Lower Engine Mount Small Bush Product Notes: Weight: 178Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325BLK Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234. Bush Size: 15mm wide bracketWeight: 83

Name: Power Steering Rack Mount Product Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 49.5mm to suit LHD ZF power steering racks. For 44mm diameter steering racks and a 18.5mm wide bracket use PFF85-232 For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 Bush Size: 49.5mmWeight: 66

Name: Power Steering Rack Mount Product Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 49.5mm to suit LHD ZF power steering racks. For 44mm diameter steering racks and a 18.5mm wide bracket use PFF85-232. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233. Bush Size: 49.5mmWeight: 66

Name: Power Steering Rack Mount Product Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 49.5mm to suit LHD ZF power steering racks. For 44mm diameter steering racks and a 18.5mm wide bracket use PFF85-232 For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 Bush Size: 49.5mmWeight: 66

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234 Bush Size: 18.5mm wide bracketWeight: 99

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm Bush Size: 18.5mm wide bracketWeight: 99

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234 Bush Size: 18.5mm wide bracketWeight: 99

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234. Bush Size: 15mm wide bracketWeight: 83

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234. Bush Size: 15mm wide bracketWeight: 83

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Powerflex Handling PackProduct Notes: This kit is suitable for Petrol vehicles only Included within this pack are the following parts:PFF85-201Front Wishbone Front BushPFF85-410Front Wishbone Rear BushPFR85-610Rear Beam Mounting BushPFF85-420Front Engine Mount Dog BonePFF85-505Front Engine Mount Dog Bone Small BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 2358

Name: Rear Anti Roll Bar Bush 18.5mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 18.5mmWeight: 130

Name: Rear Anti Roll Bar Bush 18.5mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 18.5mmWeight: 130

Name: Rear Anti Roll Bar Bush 18mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 18mmWeight: 133