Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Fiesta Models

Front Wishbone Rear Bush Caster Adjustable

Name: Front Wishbone Rear Bush Caster AdjustableProduct Notes: PFF19-2202GBLK Front Arm Rear Bush Caster Adjust has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0 of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased by 250% over standard rubber. Weight: 1170Fitting Instructions

1420.-

Front Wishbone Rear Bush Caster Offset

Name: Front Wishbone Rear Bush Caster OffsetProduct Notes: PFF19-1102G Front Wishbone Rear Bush Caster Offset is a CNC-machined Aluminium mount with an 80A durometer polyurethane bush providing approx. 1 of caster offset to improve in-corner camber gain without compromising straight-line traction as proven and tested on road and track. The Mk6 Ford Fiesta ST150 continues to be a popular choice among young drivers and track-dayers alike, and with it's 2.0L engine and sporty handling, it's not difficult to see why. Powerflex's products perfectly complementthe sporty spirit of the Mk6 ST, and with PFF19-1102G, we have combined a precision CNC-machined Aluminium bracket with our signature Polyurethane materials to provide an even more engaging driving experience.Our custom-geometry front wishbone bracket provides 1 increase in caster to sharpen up turn-in characteristics and dynamic camber, giving the front-end of your Fiesta a boost in responsiveness and improving mid-corner grip, without compromising straight line acceleration or tyre wear.As well as a improvement in suspension geometry for sports and performance driving, the PFF19-1102G bracket uses our signature Polyurethane to reduce slop in the wishbone during acceleration and braking, with the Purple 80A Road Series bush being 35% stiffer than the OE rubber bush, and the 95A Black Series being a huge 80% stiffer.Along with PFF19-1102G, we also makePFF19-1101G - Front Wishbone Front Bush With Camber Adjustment; combine them together to activate highly tuneable front axle geometry, so you can dial-in your handling perfectly for your build. Weight: 1240Fitting Instructions

1930.-

Front Wishbone Rear Bush Caster Offset

Name: Front Wishbone Rear Bush Caster OffsetProduct Notes: PFF19-1102G Front Wishbone Rear Bush Caster Offset is a CNC-machined Aluminium mount with a 95A durometer polyurethane bush providing approx. 1 of caster offset to improve in-corner camber gain without compromising straight-line traction as proven and tested on road and track. The Mk6 Ford Fiesta ST150 continues to be a popular choice among young drivers and track-dayers alike, and with it's 2.0L engine and sporty handling, it's not difficult to see why. Powerflex's products perfectly complement the sporty spirit of the Mk6 ST, and with PFF19-1102G, we have combined a precision CNC-machined Aluminium bracket with our signature Polyurethane materials to provide an even more engaging driving experience.Our custom-geometry front wishbone bracket provides 1 increase in caster to sharpen up turn-in characteristics and dynamic camber, giving the front-end of your Fiesta a boost in responsiveness and improving mid-corner grip, without compromising straight line acceleration or tyre wear.As well as a improvement in suspension geometry for sports and performance driving, the PFF19-1102G bracket uses our signature Polyurethane to reduce slop in the wishbone during acceleration and braking, with the Purple 80A Road Series bush being 35% stiffer than the OE rubber bush, and the 95A Black Series being a huge 80% stiffer.Along with PFF19-1102G, we also make PFF19-1101G - Front Wishbone Front Bush With Camber Adjustment; combine them together to activate highly tuneable front axle geometry, so you can dial-in your handling perfectly for your build. Weight: 1240Fitting Instructions

2130.-

Front Wishbone Rear Bush, Caster Adjustable

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: PU ball design comes built up, in a press fit capsule. On car adjustable bush, allowing caster adjustment of +/- 0.33 degree. Weight: 726Fitting Instructions

1480.-

Front Wishbone Rear Bush, Caster Adjustable

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: PU ball design comes built up, in a press fit capsule. On car adjustable bush, allowing caster adjustment of +/- 0.33 degree. Weight: 726Fitting Instructions

1480.-

Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Fits ST models only. Weight: 206Fitting Instructions

590.-

Gearbox Mount Insert

Name: Gearbox Mount Insert Product Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Fits ST models only. Weight: 206Fitting Instructions

650.-

Jack Pad Adaptor

Name: Jack Pad Adaptor Product Notes: PF19-860 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles:Ford C-Max MK1 (2003-2010),Ford C-Max MK2 (2011 ON),Ford Fiesta Mk7 (2008 - 2017),Ford Fiesta Mk7 ST (2013 - 2017),Ford Fiesta Mk6 inc ST (2002-2008),Ford Focus Mk1, Ford Focus Mk1 RS,Ford Focus Mk1 ST, Ford Focus MK2,Ford Focus MK2 RS, Ford Focus MK2 ST,Ford Focus Mk3, Ford Focus MK3 RS,Ford Focus Mk3 ST,Mazda Mazda 3 BK (2004-2009),Mazda Mazda 3 BL (2009-2013) Bush Size: 75mm DiameterWeight: 126

360.-

Lower Engine Mount Large Bush 25mm Oval Bracket

Name: Lower Engine Mount Large Bush 25mm Oval BracketProduct Notes: This part fits models with thinner (25mm) oval brackets only. For thicker (30mm) oval bracket use PFF19-2001. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 518Fitting Instructions

810.-

Lower Engine Mount Large Bush 25mm Oval Bracket

Name: Lower Engine Mount Large Bush 25mm Oval BracketProduct Notes: This part fits models with thinner (25mm) oval brackets only. For thicker (30mm) oval bracket use PFF19-2001. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 518Fitting Instructions

740.-

Lower Engine Mount Large Bush 30mm Oval Bracket

Name: Lower Engine Mount Large Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2003. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 523Fitting Instructions

950.-

Lower Engine Mount Large Bush 30mm Oval Bracket

Name: Lower Engine Mount Large Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2003. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 523Fitting Instructions

1040.-

Lower Engine Mount Large Bush Round Bracket

Name: Lower Engine Mount Large Bush Round BracketProduct Notes: This part fits brackets with a round bore. For brackets with an oval bore, please use PFF19-2001BLK. A small increase in NVH should be expected when stiffening the connecting mount between the engine/transmission and chassis, especially on 3-cylinder and diesel engines. The harder the material used, the greater the NVH transmitted. This should be considered as a performance upgrade. Weight: 382

780.-

Lower Engine Mount Large Bush Round Bracket

Name: Lower Engine Mount Large Bush Round BracketProduct Notes: This part fits brackets with a round bore. For brackets with an oval bore, please use PFF19-2001. A small increase in NVH should be expected when stiffening the connecting mount between the engine/transmission and chassis, especially on 3-cylinder and diesel engines. The harder the material used, the greater the NVH transmitted. This should be considered as a performance upgrade. Weight: 382

710.-

Lower Engine Mount Small Bush 25mm Oval Bracket

Name: Lower Engine Mount Small Bush 25mm Oval BracketProduct Notes: This part fits models with thinner (25mm) oval brackets only. For thicker (30mm) oval bracket use PFF19-2002. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 275Fitting Instructions

620.-

Lower Engine Mount Small Bush 25mm Oval Bracket

Name: Lower Engine Mount Small Bush 25mm Oval BracketProduct Notes: This part fits models with thinner (25mm) oval brackets only. For thicker (30mm) oval bracket use PFF19-2002. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 275Fitting Instructions

560.-

Lower Engine Mount Small Bush 30mm Oval Bracket

Name: Lower Engine Mount Small Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 278Fitting Instructions

650.-

Lower Engine Mount Small Bush 30mm Oval Bracket

Name: Lower Engine Mount Small Bush 30mm Oval BracketProduct Notes: PFF19-2002P is made from our 80A material, providing a stiffer alternative to PFF19-2002. Usually fitted with the larger PFF19-2001, it is aimed at those with modified vehicles, wanting a more connected engine and transmission feel. This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 278Fitting Instructions

590.-

Lower Engine Mount Small Bush 30mm Oval Bracket

Name: Lower Engine Mount Small Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 278Fitting Instructions

590.-

Lower Engine Mount Small Bush Round Bracket

Name: Lower Engine Mount Small Bush Round BracketProduct Notes: A small increase in NVH should be expected when stiffening the connecting mount between the engine/transmission and chassis, especially on 3-cylinder and diesel engines. The harder the material used, the greater the NVH transmitted. This should be considered as a performance upgrade. Weight: 270Fitting Instructions

620.-

Lower Engine Mount Small Bush Round Bracket

Name: Lower Engine Mount Small Bush Round BracketProduct Notes: A small increase in NVH should be expected when stiffening the connecting mount between the engine/transmission and chassis, especially on 3-cylinder and diesel engines. The harder the material used, the greater the NVH transmitted. This should be considered as a performance upgrade. Weight: 270Fitting Instructions

680.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert.In our Red 65 Shore A material, the movement of the engine mount is reduced by almost half for a given load by the engine.For ultimate engine stability we recommend using our complete engine mount PFF19-2222. Weight: 75

460.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush InsertProduct Notes: Made in our softer Red 65A durometer material in consideration of Ford's 3-Cylinder engine, this is a cost-effective and easy-to-fit insert, designed to sharpen throttle response and add more precision to gear changes; whilst reducing wheel-hop and improving the durability and longevity of the OE mount. Weight: 143

460.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush InsertProduct Notes: Made in our Black 95A material this is a cost-effective and easy-to-fit insert, designed to sharpen throttle response and add more precision to gear changes; whilst reducing wheel-hop and improving the durability and longevity of the OE mount. Weight: 143

500.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: PFF19-2225 is an insert only that fits into the original engine mount for reduced engine movement. For a complete mount including bushes please use PFF19-2223. Fits models with the 1.0 Ecoboost engine only. Weight: 95

460.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: PFF19-2225 is an insert only that fits into the original engine mount for reduced engine movement. For a complete mount including bushes please use PFF19-2223. Fits models with the 1.0 Ecoboost engine only. Weight: 95

510.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert.In our Black Series 95 Shore A material, the movement of the engine mount is reduced by almost three times for a given load by the engine.For ultimate engine stability we recommend using our complete engine mount PFF19-2222. Weight: 75

500.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: This part fits 1.5L Ecoboost ST 200 models only with 40mm wide bush. Bush Size: 40mmWeight: 112

550.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small Bush Product Notes: This part fits 1.5L Ecoboost ST 200 models only with 40mm wide bush. Bush Size: 40mmWeight: 112

510.-

Lower Torque Mount, Fast Road

Name: Lower Torque Mount, Fast RoadProduct Notes: Supplied as a Polyurethane bush and CNC machined bracket combination, the Purple 80A materials in PFF19-2222 suits fast road usage. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles. Weight: 650Fitting Instructions

2250.-

Lower Torque Mount, Fast Road

Name: Lower Torque Mount, Fast RoadProduct Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-2020 Lower Engine Mount Bracket & Bushes (Yellow 70A) is 50% stiffer than the OE mount and recommended for fast road use for standard or mildly tuned cars. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement. Weight: 1058Fitting Instructions

2170.-

Lower Torque Mount, Fast Road

Name: Lower Torque Mount, Fast Road Product Notes: Features a CNC machined and laser-etched aluminium bracket and sleeve, with our signature Purple 80A durometer bushes, increasing stiffness over the OE mount by up to 400% at maximum load. PFF19-2226 Lower Torque Mountfeaturesa CNC machined and laser-etched aluminium bracketand sleeve, with oursignaturePurple80Adurometerbushes.POWERFLEX bushes will increase the stiffness over the OE mount by up to 400% at maximum load.Upgrading the torque mount has benefits including a sharper throttle response, reduced wheel hop, improved traction and more balanced on/off throttle handling.The Bracket is CNC machined out of 6082 Aluminium Weight: 697Fitting Instructions

2520.-

Viser 65 til 96 (av 143 produkter)

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png