Citroen

Name: Front Wishbone Rear Bush Product Notes: This bush kit incorporates anti-lift properties by lowering the rear of the arm by 10mm. Bush Size: 47mm LongWeight: 655Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This bush kit incorporates anti-lift properties by lowering the rear of the arm by 10mm. Bush Size: 55mm LongWeight: 660Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This bush kit incorporates anti-lift properties by lowering the rear of the arm by 10mm. Bush Size: 55mm LongWeight: 660Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Weight: 1121Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: This bush kit incorporates anti-lift properties by lowering the rear of the arm by 10mm. Bush Size: 47mm LongWeight: 655Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Only Fits Mk1 AX Up To Plate Number 5277 Weight: 215

Name: Front Wishbone Rear BushProduct Notes: Only Fits Mk1 AX Up To Plate Number 5277 Weight: 215

Name: Front Wishbone Rear Bush Product Notes: PFF12-702 is a three-part polyurethane sliding bush design for increased articulation, held securely between two CNC machined stainless steel sleeves. Weight: 841Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: PFF12-702 is a three-part polyurethane sliding bush design for increased articulation, held securely between two CNC machined stainless steel sleeves. Weight: 841Fitting Instructions

Name: Lower Engine Mount BushProduct Notes: Suitable for petrol models only. This is a complete polyurethane bush to replace the original rubber bush in the factory mount. For an insert only please use PFF12-721. Weight: 378Fitting Instructions

Name: Lower Engine Mount BushProduct Notes: Suitable for petrol models only. This is a complete polyurethane bush to replace the original rubber bush in the factory mount. For an insert only please use PFF12-721. Weight: 378Fitting Instructions

Name: Lower Engine Mount Bush InsertProduct Notes: Suitable for petrol models only. This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration. For a complete, replacement bush please use PFF12-720. Weight: 111

Name: Lower Engine Mount Bush InsertProduct Notes: Suitable for petrol models only. This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration. For a complete, replacement bush please use PFF12-720. Weight: 111

Name: Lower Engine Mount InsertProduct Notes: This insert fits into the voids of the original mount. Please check void shape to select correct insert PFF12-204 or PFF12-205 Weight: 99

Name: Lower Engine Mount InsertProduct Notes: This insert fits into the voids of the original mount. Please check void shape to select correct insert PFF12-204 or PFF12-205 Weight: 75

Name: Lower Engine Mount InsertProduct Notes: This insert fits into the voids of the original mount. Please check void shape to select correct insert PFF12-204 or PFF12-205 Weight: 99

Name: Lower Engine Mount InsertProduct Notes: This insert fits into the voids of the original mount. Please check void shape to select correct insert PFF12-204 or PFF12-205 Weight: 75

Name: Lower Rear Engine Mount Bush - Diesel EngineProduct Notes: Only fits vehicles with cast aluminium engine bush mounting brackets. It will not fit the pressed steel torque link (part no. 1806.A0 / 1806.H0) as fitted to 2.0 HDi. 2.0 16v or 308 GTi models. Please note these parts should be considered an upgrade and therefore some additional NVH transmission may be felt. For vehicles with a 65mm bush use PFF50-420R. Bush Size: 70mmWeight: 425Fitting Instructions

Name: Lower Rear Engine Mount Bush - Fast Road/TrackProduct Notes: Peugeot 206 PFF50-420 fits 1.1, 1.4 & 1.6 petrol engines (65mm). - Peugeot 307 PFF50-420 is used where the original bush diameter measures 65mm, for vehicles with a 70mm bush use PFF50-306. Bush Size: 65mmWeight: 288Fitting Instructions

Name: Lower Rear Engine Mount Bush - Fast Road/TrackProduct Notes: Only fits vehicles with cast aluminium engine bush mounting brackets. It will not fit the pressed steel torque link (part no. 1806.A0 / 1806.H0) as fitted to 2.0 HDi. 2.0 16v or 308 GTi models. Please note these parts should be considered an upgrade and therefore some additional NVH transmission may be felt. For vehicles with a 65mm bush use PFF50-420P. Bush Size: 70mmWeight: 425Fitting Instructions

Name: Lower Rear Engine Mount Bush - Road Product Notes: Only fits vehicles with cast aluminium engine bush mounting brackets. It will not fit the pressed steel torque link (part no. 1806.A0 / 1806.H0) as fitted to 2.0 HDi. 2.0 16v or 308 GTi models. Please note these parts should be considered an upgrade and therefore some additional NVH transmission may be felt. For vehicles with a 65mm bush use PFF50-420. Bush Size: 70mm Weight: 425 Fitting Instructions

Name: Lower Rear Engine Mount Bush - Road Product Notes: Peugeot 206 PFF50-420 fits 1.1, 1.4 & 1.6 petrol engines (65mm). - Peugeot 307 PFF50-420 is used where the original bush diameter measures 65mm, for vehicles with a 70mm bush use PFF50-306. Bush Size: 65mmWeight: 288Fitting Instructions

Name: Lower Rear Engine Mount Bush - Std DieselProduct Notes: PFF50-420R fits diesel engines with a 65mm original bush. For vehicles with a 70mm bush use part number PFF50-306R. Bush Size: 65mmWeight: 288Fitting Instructions

Name: Lower Rear Engine Mount Bush - Track/MSportProduct Notes: Only fits vehicles with cast aluminium engine bush mounting brackets. It will not fit the pressed steel torque link (part no. 1806.A0 / 1806.H0) as fitted to 2.0 HDi. 2.0 16v or 308 GTi models. Please note these parts should be considered an upgrade and therefore some additional NVH transmission may be felt. Bush Size: 70mmWeight: 425

Name: Lower Rear Engine Mount Bush - Track/MSportProduct Notes: Peugeot 206 PFF50-420 fits 1.1, 1.4 & 1.6 petrol engines (65mm). - Peugeot 307 PFF50-420 is used where the original bush diameter measures 65mm, for vehicles with a 70mm bush use PFF50-306. Bush Size: 65mmWeight: 288Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Powerflex Handling PackProduct Notes: Please check voiding on original bush for PFF12-204 Included within this pack are the following parts:PFF12-201Front Arm Front BushPFF12-201Front Arm Rear BushPFF12-204Lower Engine Mount InsertPFR12-210Rear Beam Mounting BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 1979

Name: Powerflex Handling PackProduct Notes: PF12K-1002 fits vehicles with factory fitted sports suspension.Included within this pack are the following parts:PFF12-101Front Wishbone Front BushPFF12-106Front Wishbone Rear BushPFF50-106Front Lower Engine MountPFR12-109Rear Beam MountFits Saxo and 106 Models with Sports Suspension only.This Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 1977

Name: Rear Beam BushProduct Notes: Fits 1.6 petrol, 1.6 & 2.0 diesel models with a rear beam, not for multi link rear suspension models. Weight: 1050Fitting Instructions

Name: Rear Beam Bush Product Notes: Weight: 859