BMW

Name: Front Wishbone Rear BushProduct Notes: Made from our Black 95A durometer for updated steering precision. Weight: 482Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This part is only suitable for fast road or light track use. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if your vehicle is heavily modified and is used for heavy track use, or for competition. Bush Size: 60mmWeight: 528Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mm Weight: 502 Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This part is not suitable for cars being used on track or for competition. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if this is the intended use for your vehicle. Bush Size: 60mmWeight: 528Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This part is not suitable for cars being used on track or for competition. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if this is the intended use for your vehicle. Bush Size: 60mmWeight: 528Fitting Instructions

Name: Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer)Product Notes: PFF5-3603BLK Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. PFF5-3603BLK uses a CNC-machined Aluminium outer shell to increase stiffness and durability further for the most demanding high-stress conditions. Weight: 596Fitting Instructions

Name: Front Wishbone Rear Bush (E46 Hybrid)Product Notes: PFF5-3601BLK Front Wishbone Rear Bush (E46 Hybrid) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner and outer bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. Weight: 386Fitting Instructions

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: This part replaces original bush and also fits M3 vehicles that have a thicker wishbone. PFF5-5601M3 is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: This part fits into original bracket and fits M3 vehicles that have a thicker wishbone. PFF5-5601M3 is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601 is a high performance option to PFF5-4601, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Bush Size: 66mmWeight: 744Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601-60 is a high-performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601-60 is a high-performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with a 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601 is a high-performance option to PFF5-4601 and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Bush Size: 66mmWeight: 744Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium Outer (Concentric)Product Notes: PFF5-5301 includes a CNC-machined aluminium outer shell with a concentric bore for standard geometry alignment, and with the machined shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium Outer (Concentric)Product Notes: PFF5-5301 includes a CNC-machined aluminium outer shell with a concentric bore for standard geometry alignment, and with the machined shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium Outer Caster OffsetProduct Notes: PFF5-5303 includes a CNC-machined aluminium outer shell with an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. By including the shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium Outer Caster OffsetProduct Notes: PFF5-5303 includes a CNC-machined aluminium outer shell with an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. By including the shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G offers additional +0.5 of caster over PFF5-5601 and is a high performance option to PFF5-4601, and aimed at offering greater precision with improved geometry for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases stiffness by 28%, to give an 190% increase in stiffness over the original part Bush Size: 66mmWeight: 788Fitting Instructions

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G-60 offers additional +0.33 of caster over PFF5-5601-60 and is a high performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases siffness by 28%, to give an 190% increase in stiffness over the original part Bush Size: 60mmWeight: 633Fitting Instructions

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601GM3 offers additional +0.5 of caster over PFF5-5601M3 and is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. Testing during the development of this bush has indicated stiffness gains of 190% compared with the original rubber bush. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 634Fitting Instructions

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601GM3 offers additional +0.5 of caster over PFF5-5601M3 and is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases siffness by 28%, to give an 190% increase in stiffness over the original part Bush Size: 60mmWeight: 634Fitting Instructions

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G-60 offers additional +0.33 of caster over PFF5-5601-60 and is a high performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. Testing during the development of this bush has indicated stiffness gains of 190% compared with the original rubber bush. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 633Fitting Instructions

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G offers additional +0.5 of caster over PFF5-5601 and is a high performance option to PFF5-4601, and aimed at offering greater precision with improved geometry for people wanting the very best from their E46 or Z4. Testing during the development of this bush has indicated stiffness gains of 190% compared with the original rubber bush. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Bush Size: 66mmWeight: 788Fitting Instructions

Name: Gear Shift Arm Front Bush OvalProduct Notes: Depending on vehicle application, this part can be 1 or 2 per car. Size 22mm W x 17mm H x 26mm L. Bush Size: 22mm x 17mm x 26mmWeight: 26

Name: Gear Shift Arm Front Bush OvalProduct Notes: Depending on vehicle application, this part can be 1 or 2 per car. Size 22mm W x 17mm H x 26mm L. Bush Size: 22mm x 17mm x 26mmWeight: 26

Name: Gear Shift Arm Front Bush OvalProduct Notes: Depending on vehicle application, this part can be 1 or 2 per car. Size 22mm W x 17mm H x 26mm L. Bush Size: 22mm x 17mm x 26mmWeight: 26

Name: Gear Shift Arm Front Bush RoundProduct Notes: Bush Size: 26mm LongWeight: 26