BMW

Name: Front Radius Arm To Chassis Bush Caster AdjustableProduct Notes: This is a replacement part that in our Black Series application is over 200% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF5-1901GBLK provides +/- 0.75 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-1901BLK. Weight: 1069Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjustableProduct Notes: This is a replacement part that in our Black material is 200% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF5-1901G provides +/- 0.75 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-1901. Weight: 1069Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster AdjustableProduct Notes: PFF5-6001G provides +/- 0.5 caster adjustability for In-corner camber gain, Sharper steering turn-in and Greater steering feedback. For a non-adjustable version of this bush please use PFF5-6001. Weight: 1809Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster Adjustable Product Notes: PFF5-6001G provides +/- 0.5 caster adjustability for In-corner camber gain, Sharper steering turn-in and Greater steering feedback. For a non-adjustable version of this bush please use PFF5-6001. Weight: 1809Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster Adjustable Product Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. PFF5-6201G provides 6mm offset to provide +/- 0.5 caster adjustability for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-6201. Weight: 1857Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster AdjustableProduct Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. PFF5-6201G provides 6mm offset to provide +/- 0.5 caster adjustability for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-6201. Weight: 1857Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster Offset Product Notes: PFF5-6101G provides a fixed 6mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-6101. Weight: 858Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster Offset Product Notes: PFF5-6101G provides a fixed 6mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-6101. Weight: 858Fitting Instructions

Name: Front Roll Bar/Subframe Strengthening Support PlateProduct Notes: The aluminium front subframe fitted to the E6*M5/M6 is prone to failure at the point where the roll barbracket clamps to the subframe. Once this point starts to weaken and bend, it can lead to the subframe tab fracturing or the bush clamp cracking.PFF5-4203PLT is a high-grade zinc-coated steel plate to strengthen the subframe at this point. FEA testing has shown the addition ofPFF5-4203PLT,to reduce stress in the subframe by 22.5%. Weight: 172

Name: Front Strut Top Mount Guide BushProduct Notes: With the foam material of the original mount literally turning to dust with age, these guide bushes are often the cause of front-end knocking which can, at times be misdiagnosed as an expensive front damper or top mount replacement. Our replacement bushes are made from our Yellow 70A durometer polyurethane material for increased performance and durability, providing a cost-effective, fit-and-forget solution that's a worthwhile upgrade as part of any front suspension overhaul. Original Foam Bush vs PFF5-1430 Yellow 70A Polyurethane BushOE Bush failure can be messy, lead to unpleasant ride and cause further damage: Weight: 108Fitting Instructions

Name: Front Track Control Arm Inner BushProduct Notes: Weight: 752Fitting Instructions

Name: Front Track Control Arm Inner BushProduct Notes: Weight: 752Fitting Instructions

Name: Front Trailing Arm Rear BushProduct Notes: Weight: 1368

Name: Front Trailing Arm Rear BushProduct Notes: Weight: 1368

Name: Front Trailing Arm Rear BushProduct Notes: Weight: 1368

Name: Front Upper Control Arm To Chassis BushProduct Notes: Weight: 522Fitting Instructions

Name: Front Upper Control Arm To Chassis BushProduct Notes: Weight: 522Fitting Instructions

Name: Front Upper Control Arm To Chassis BushProduct Notes: Weight: 522Fitting Instructions

Name: Front Upper Control Arm to Chassis BushProduct Notes: It will not fit E24 6 series models built before 05/1982. Weight: 870Fitting Instructions

Name: Front Upper Control Arm to Chassis BushProduct Notes: It will not fit E24 6 series models built before 05/1982. Weight: 870Fitting Instructions

Name: Front Upper Control Arm to Chassis BushProduct Notes: It will not fit E24 6 series models built before 05/1982. Weight: 870Fitting Instructions

Name: Front Upper Wishbone Bush Product Notes: Weight: 765Fitting Instructions

Name: Front Upper Wishbone Bush Product Notes: Weight: 765Fitting Instructions

Name: Front Upper Wishbone BushProduct Notes: Made using our stiffest Black 95A Durometer Polyurethane with in-house CNC-machined metal components, this new bush provides a durable and reliable alternative to the OEM rubber bushes and a more cost-effective solution to replacing the entire arm. Our bushes have been designed to be 30% stiffer than the standard rubber, for a more responsive and assured handling feel and unlike rubber, will not soften with age providing a truly fit-and-forget solution. Weight: 1411Fitting Instructions

Name: Front Upper Wishbone BushProduct Notes: Made using our stiffest Black 95A Durometer Polyurethane with in-house CNC-machined metal components, this new bush provides a durable and reliable alternative to the OEM rubber bushes and a more cost-effective solution to replacing the entire arm. Our bushes have been designed to be 30% stiffer than the standard rubber, for a more responsive and assured handling feel and unlike rubber, will not soften with age providing a truly fit-and-forget solution. Weight: 1411Fitting Instructions

Name: Front Upper Wishbone Bush Camber AdjustableProduct Notes: PFF5-6004G is a replacement bush that is 66% stiffer than the original rubber bush and provides +/- 0.5 of on-car camber adjustment. For a non-adjustable version of this bush please use PFF5-6004. Weight: 1041

Name: Front Upper Wishbone Bush Camber AdjustableProduct Notes: PFF5-6004G is a replacement bush that is 66% stiffer than the original rubber bush and provides +/- 0.5 of on-car camber adjustment. For a non-adjustable version of this bush please use PFF5-6004. Weight: 1041Fitting Instructions

Name: Front Upper Wishbone Bush Camber AdjustableProduct Notes: Made using our stiffest Black 95A Durometer Polyurethane with in-house CNC-machined stainless-steel adjustable sleeves and matched adjusting spanner for up to +/- 0.5 of on-car front camber adjustment, this new bush provides a durable and reliable alternative to the OEM rubber bushes and a more cost-effective solution to replacing the entire arm. Our bushes have been designed to be 30% stiffer than the standard rubber, for a more responsive and assured handling feel and unlike rubber, will not soften with age providing a truly fit-and-forget solution. Weight: 1600Fitting Instructions

Name: Front Upper Wishbone Bush Camber AdjustableProduct Notes: Made using our stiffest Black 95A Durometer Polyurethane with in-house CNC-machined stainless-steel adjustable sleeves and matched adjusting spanner for up to +/- 0.5 of on-car front camber adjustment, this new bush provides a durable and reliable alternative to the OEM rubber bushes and a more cost-effective solution to replacing the entire arm. Our bushes have been designed to be 30% stiffer than the standard rubber, for a more responsive and assured handling feel and unlike rubber, will not soften with age providing a truly fit-and-forget solution. Weight: 1600Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Made from our Purple 80A durometer to allow for controlled wishbone articulation. Weight: 863Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This fits the 4WD 'Xi/XD' models only. They are designed to fit the 60mm Aluminium housing Bush Size: 60mmWeight: 308Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This fits the 4WD 'Xi/XD' models only. They are designed to fit the 60mm Aluminium housing Bush Size: 60mmWeight: 308Fitting Instructions