T6 Styling + Diverse

Bakfangerbeskytter i plast Transporter T6 / T6.1 For biler med hel bakluke. Perfekt passform og monteres med dobbel tape som er montert på. Enkel montering.  

RDX Bak Spoiler VW T6 2015+ T6.1 2020- For de med delte dører bak. leveres ulakkert. Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models with single trunk. Leveres ullakert og en del puss og sparkel etc må påregnes før lakk samt også muligheter for å ,måtte lakkere flere ganger pga utgassing, skal ikke ha varme under tørking. Leveres ubehandlet, noe arbeid må påregnes som puss etc før lakkering. Det beste produktet vi har funnet av de rimelige alternativene på markedet  

RDX Bakluke Spoiler VW T6 2015+ Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models with single trunk. Leveres ullakert og en del puss og sparkel etc må påregnes før lakk samt også muligheter for å ,måtte lakkere flere ganger pga utgassing, skal ikke ha varme under tørking. Leveres ubehandlet, noe arbeid må påregnes som puss etc før lakkering. Det beste produktet vi har funnet av de rimelige alternativene på markedet  

Frontsplitter Transporter T6 2016-2019 Frontsplitter till Volkswagen Transporter T6 från 2016-2019, tillverkad i ABS-plast. En liten detalj som bidrar till ett tufft utseende på din T6 16-19  FRONTSPLITTER TRANSPORTER Frontsplitter monteras tillsammans med originalstötfångaren. Exakt passform förenklar monteringsarbetet avsevärt, och montering sker enkelt genom att frontsplittern skruvas mot originalstötfångaren. Levereras komplett med monteringsdetaljer. DEN HÄR PRODUKTEN PASSAR TILL FÖLJANDE BILMODELLER: Volkswagen Transporter T6 2016-2019

Skvettlapper sett framme VW Transporter T5 2003-2015 T6 2015-2020 For T6.1 er det egne se https://www.koolart.no/products/skvettlapper-sett-framme-vw-transporter-t61-2021  Leveres i sett høyre og venstre med all monterings detailjer samt en god monterings anvisning. Et perfekt produkt som virkelig virker. Noe alle Transporter T5 og  T6 bør ha montert.  

Skvettlapper bak VW T6 2016-2019 Selges i par 

Den beste glasspluggen på markedet, ikke rimeligst men helt klart den beste i kvalitet etc. Speed-Tech Glassplugg for vindu ved fjerning av vindusvisker på bakvindu. 26,5mm (2,65cm) CNC frest plugg i ekte glass. Limes i hullet til bakrute viskeren. Denne glass pluggen passer for følgene bilmodeller: VW / Volkswagen - UP! - Fox - Lupo - Polo fra årsmodell1999 6N/6NF, 6N2, 9N, 9N3, 6R - Golf 4 / Golf 5 / Golf 6 / Golf 7 / Bora Jetta Variant - Passat fra årsmodell1996 B5, B6, 3B, 3B 3BG, 3C - Scirocco fra årsmodell 2008 - Caddy / Golf Plus / Sharan - T4, T5, T6 , T6.1 02-22 Tiguan, Touran, Touareg Audi: - A1, A2, A3, A4, A6, S3, S4, S6, RS4, RS6 - Q3, Q5, Q7 Seat: - Alhambra, Altea, Arosa, Cordoba, Ibiza, Inca, Leon, Toledo SKODA: - Fabia, Octavia, Roomster, Superb, Yeti 100% Ekte glass CNC - maskinert Black coated fra innsiden Integrert bakplate for å lime fast til baksiden av bakruten Monterings manual medfølger Denne glasspluggen er den originale glasspluggen produsert av Speed-Tech i Tyskland, og kan ikke sammenlignes med andre produsenter. Bruk Tex 7 eller Sikaflex eller Rute lim ved montering. Gir et slett og flott look.

Vindaviser panser VW T6 2016- Festes under panser med klips. Meget sports lik og god funksjon.  

Disse er for VW Transporter etc T5 T6 T6.1 2004-2021. Selges pr par.   Kvalitetsprodukt! ClimAir's vindavvisere er produsert i Tyskland av akryl. De er TÜV godkjente og innehar den høyeste kvalitet. Selges i sett på 2 stk. Montering kan gjøres selv, kort monterings anvisning er illustrert.        

Automatic Stop Start Engine System Cancel Device Cable For VW Golf 6 T5 T6 The Usage Requirements of your car: This product function is close stop start engine system, you original car must have "A-Off" switch button, if you car haven't "A-Off" button, it will not fitted. Memory Modes function Memory mode: Manually switch the start-stop switch once, and the start-stop state will be saved and memorized, and will not be affected by power failure. Specification: Color: Black Length：15cm / 5.91inch Material: ABS Plastic Rated Current: 12A Function: Close the auto stop start engine Fitment: Für VW Golf 6 T5 T6 (Car Types is for reference only, Pls provide us your car center console with A-off switch photos to our customer service, we'd happy to help you check the compatible before payment to avoid the purchasing mistake, thank you very much!)   Installation: 1. PLease turn off the power of the car before installation. 2. Remove the center console panel by removal tool, and connect the cable between A-off switch interface and original cable plugs. Then the original car start and stop switch button can be transferred. ( NOTE: The indicator light on means OFF, and the indicator light off means ON.) Package Included: 1 x Automatic Stop Start Engine System Cable 1 x Removal Tools (Free gift) Note: 1. The item does not include installation instructions. Professional installation is highly recommended!!! 2. Please allow 0.5-1 inch difference due to manual measurement.(1 Inch=2.54cm) 3. The orange pry removal tools is a free gift, it cannot fitted all vehicles. 4. Different batches cable colors will be in difference. It doesn't affect product working. If you mind, don't purchasing. Thank you for your understanding!

Product Description This reinforced silicone intake hose fits the 2 litre turbo VW T6 TSI. The van uses a derivative of the high performance “EA888” 2.0TSI engine found in the ever-popular Golf GTI. The hose is also compatible with other VW vehicles that have the OEM hose Number: 7EO129627B Due to its location it really improves the looks of the engine compartment and removes any restriction of the OEM plastic hard pipe.  These are available in red, blue, or black. Please select your choice in the options above when ordering. This part is also compatible with intercooler option FMINT13 and dump valve FMDVMK7 The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* The hose has an inner diameter of 57mm with a smooth taper to 80mm   

Product Description This intercooler has been specifically designed for the VW T5.1 and T6 fitted with the BiTDi twin turbo diesel (nb: for T6, this product is only compatible with the CFCA engine). Using a combination of greater core size and thermal efficiency, we have been able to improve the cooling of the intake charge air, which in turn means more power when compared to the original intercooling, and may lead to greater longevity of engine components, as heat related stress is decreased. Our own test vehicle consistantly showed that our intercooler reduced the intake air temperature by a further 10°C when compared to the original intercooler, and had a lower resistance resulting in a pressure drop. This product would normally be recommended for those who have tuned the engine by using performance software or a tuning box type interceptor, but it may also aid fuel economy depending on driving style. *Please note that the oil cooler as displayed in the product images, which will help reduce temperatures further, must be purchased seperately.

Product Description T6 & T6.1 2.0 BiTDI models Suitable for vehicles with the larger 90mm MAF housing     Highlights:  Designed for VW Transporter T6 BiTDI / Bi-Turbo models Suitable for vehicles with the larger 90mm MAF housing Direct replacement for the factory airbox lid High-flow Pipercross foam filter Precision-fabricated Forge heat shield Improved throttle response and intake sound Independent dyno-tested performance gains Designed and manufactured in the UK Lifetime warranty This induction kit is designed to replace OEM airbox housings found on selected Volkswagen Transporter T6 and T6.1 2.0 BiTDI models, equipped with the larger 90mm MAF housing.   7E0 129 607 T 7E0 129 607 M 7E0 129 607 H 7E0 129 607 AA The FMINDK66 is Forge Motorsport’s dedicated induction solution for Volkswagen Transporter T6 and T6.1 2.0 BiTDI    The Forge Motorsport team is proud to introduce a new induction kit, developed in response to popular demand and engineered specifically for the Volkswagen Transporter T6 Bi-Turbo equipped with the larger 90mm MAF sensor (OE part number 7E0 129 607 T). Building on the success of the FMINDK48, our engineers have designed the FMINDK66 as a direct replacement for the factory airbox lid, offering a high-quality, performance-focused upgrade. The precisely engineered heat shield fits seamlessly into the vehicle, ensuring the intake avoids drawing in hot air. This allows your Transporter to breathe more efficiently, resulting in improved overall performance As with all Forge products, testing was carried out alongside independent specialists—on this occasion, Avon Tuning—where dyno results demonstrated noticeable gains in power and performance.  With a tuning box installed it gave peak gains of 12.5 BHP with gains of also 20NM of Torque, most impressively though are the mid range power improvements , typically this is where the driver will really feel a great improvement in acceleration, as well as far supplier towing power, this can be ideal for heavier transporters typically with camper conversions. The first dyno pictured show the improvements on a 100% stock ECU while the second dyno shows the increases with a tuning box installed , the third dyno graph we have highlighted where the maximum gains are in the rev range , DYNO 3 shows a huge 23 BHP increase @3700 rpm with a gain 44nm @3600RPM!       How do I identify my airbox for the BI TURBO ?  1.     Remove the maff housing and measure the junction where the maff tube was housed as pictured below. 2.     Or remove the complete airbox and refer to the part number marked on the underside of the airbox as pictured below: 7E0. 129. 607. T  

Passer de med bakluke VW T6 2015- og VW T6.1 2020- Bakluke spoiler, Heckspoiler for montering på toppen av hel bakluke. Kommer ulakkert og må lakkeres. (Slik finnes ikke til delte bakdører, men det er noen som har kuttet denne i to og lakkert med stort hell ) Alltid på lager slik at det er kort leverings tid. Denne er super passform og ikke noe billig glassfiber modell, denne er støpt i polymetran og også den fine lille modellen som er penest. Passer alle med hel bakluke.

Side beskytter lister VW T5 T6 T6.1  Kort bil med 2 skyve dører.   Skjerm buer må bestilles seperat

Takrails i svart Aluminium/Plast till VW Transporter T6 L2 2016- For biler med Lang aksel avstand 340 cm. Monteres i de orginale tak stativ festene på taket. enkel montering. Leveres i Høyre og Venstre  

Takrails i svart Aluminium/Plast till VW Transporter T6 L2 2016- For biler med Lang aksel avstand 340 cm. Monteres i de orginale tak stativ festene på taket. enkel montering. Leveres i Høyre og Venstre Med takstativ, meget enkel montering. 15-20 min.  

Maxton V1 CUP Spoiler leppe VW T6 Svart ABS Laget i svart ABS plast, Leveres klar til montering glossy black. kan lakkeres om ønskelig. Monteres under fanger ved å bore hull og skru fast, skruer etc følger med.  

CUP Spoiler leppe VW T6 Svart ABS Laget i svart ABS plast, Leveres klar til montering glossy black. kan lakkeres om ønskelig. Monteres under fanger ved å bore hull og skru fast, skruer etc følger med.  

SIDE SKIRTS DIFFUSERS VOLKSWAGEN T6 og T6.1 Maxton Sort blank, leveres i par høyre og venstre.

Støtfanger beskyttelse VW T6 / VW T6.1 svart Glatt utgave For biler med hel bakluke. Perfekt passform og monteres med dobbel tape som er montert på. Enkel montering.  

Takrails i svart Aluminium/Plast till VW Transporter T6 L1 2016- For biler med Kort aksel avstand 300 cm. Monteres i de orginale tak stativ festene på taket. enkel montering. Leveres i Høyre og Venstre. Med 2 stk tak stativ, enkel montering ca 15-20 min.  

Bakluke spoiler for VW T6 og T6.1  Klart lakkert hvit 

Product Description Highlights:  Fits all Transporters from 2003-2024 (see exclusions below)  Increased air flow Increased acoustic noise Easy fit Picks up from OEM inlet ducting Increased surface area of filter This part replaces OEM 7E0129601 / 7HO129601 / 7LA129601 FMINDK48 is the Forge Motorsport intake solution for VW T5/T5.1/T6 and T6.1. Yes, this beautifully crafted product fits all Transporters from 2003-2024! It has been designed and engineered to directly replace the stock airbox lid and offers a high-quality replacement, with its open top design which not only looks aesthetically pleasing but is designed to increase the airflow and performance of your vehicle. By neatly clipping into the airbox, this Forge Motorsport induction kit design ensures that it is not a 'hot air filter', allowing your Transporter to breathe better therefore improving performance. During the development phase we found that the opening on the top and slots on the side of the intake helped mapped vehicles, while not causing detriment to standard tune vehicles.   Our intakes are designed to the highest quality with UK manufactured sheet metal and a high quality Pipercross air filter to significantly increase surface area allowing a greater airflow. FMINDK48 was designed to increase throttle response, improve performance, and make a far better sound, all of which improve the driving experience.  The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy. The kit comes complete with everything you need for installation, which can be carried out in around 30 minutes, including a set of full colour instructions. *Please note - the filter is excluded from the Forge lifetime warranty* Compatibility Information: This product does not fit the 199bhp (CXEC) or 204bhp (CXEB) engines as they have a different diameter MAF housing VW Transporter (T5) 2.5 TDI - (2003-2009) VW Transporter (T5.1) 2.0 TDI - (2010-2015) VW Transporter (T5.1) 2.0 BiTDI - (2010-2015) VW Transporter (T6) 2.0 TDI - (2015-2019) VW Transporter (T6) 2.0 TSI - (2015-2019) VW Transporter (T6.1) 2.0 TDI - (2019-) VW Transporter (T6) 2.0 TSI (2019- 2022 - ensure fitment of vacuum tube filter, included in the kit) VW Caravelle (T5) 2.5 TDI (2003-2009) VW Caravelle (T5.1) 2.0 TDI (2010-2015) VW Caravelle (T5.1) 2.0 BiTDI (2010-2015) VW Caravelle (T6) 2.0 TDI (2015-2019) VW Caravelle (T6) 2.0 TSI (2015-2019) VW Caravelle (T6.1) 2.0 TDI (2019-) VW Caravelle (T6.1) 2.0 TSI (2019-2022 - ensure fitment of vacuum tube filter, included in the kit)

Not compatible with vehicles with sensors or spouts. Please check the OEM part number to ensure compatibility. This reinforced silicone intake hose fits the VW T6/T6.1 2015 Onwards. This product replaces the original rubber hose, it is constructed with 5 ply silicone layers and Fluro silicone inner liner which prevents discolouring and adds further to the hose integrity. The hose is only compatible with the VW Transporters that have the OEM hose Number: 7E0129615P.     Due to its location it really improves the looks of the engine compartment and removes any restriction of the OEM ribbed rubber hose. These are available in red, blue, or black. Please select your choice in the options above when ordering. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*

Rear Defusser for VW T6 Lakkerte fangere  Leveres blank sort

Rear Side Splitters Volkswagen T6

Skjermbue sett i ABS plast 10 deler for VW T6 2015- En eller To skyvedører og kun til Lang bil.   Limes på med Tex7 samt dobbel sidig tape.   Vakuumformet ABS plast hjulkapslene på VW T6 Transporter og Caravelle. Denne 10 stykke kit. Disse dekker ikke bare men ser bra ut, men også forhindre skader fra steinsprut og riper. Buene er enkle å montere på plass ved hjelp av en dobbeltsidig 3M tape og tex7/sikaflex leveres med settet. For å hjelpe, er en full skjematisk monteringsanvisning også inkludert. Produktet leveres i en svart finish og er klar til å bli montert rett på bilen din. Blir levert i en vanlig svart ABS finish, er det mulig å ha disse delene fargekodet til bilen (ikke inkludert).    

Skjermbue sett i ABS plast 10 deler for VW T6 2015- Kort bil med En skyvedør høyre side. Limes på med Tex7 samt dobbel sidig tape. Vakuumformet ABS plast hjulkapslene på VW T6 Transporter og Caravelle. Denne 10 stykke kit. Disse dekker ikke bare men ser bra ut, men også forhindre skader fra steinsprut og riper. Buene er enkle å montere på plass ved hjelp av en dobbeltsidig 3M tape og tex7/sikaflex leveres med settet. For å hjelpe, er en full skjematisk monteringsanvisning også inkludert. Produktet leveres i en svart finish og er klar til å bli montert rett på bilen din. Blir levert i en vanlig svart ABS finish, er det mulig å ha disse delene fargekodet til bilen (ikke inkludert).    

Skjermbue sett i ABS plast 10 deler for VW T6 2015- Kort bil med To skyvedører høyre side og venstre side.   Limes på med Tex7 samt dobbel sidig tape.   Vakuumformet ABS plast hjulkapslene på VW T6 Transporter og Caravelle. Denne 10 stykke kit. Disse dekker ikke bare men ser bra ut, men også forhindre skader fra steinsprut og riper. Buene er enkle å montere på plass ved hjelp av en dobbeltsidig 3M tape og tex7/sikaflex leveres med settet. For å hjelpe, er en full skjematisk monteringsanvisning også inkludert. Produktet leveres i en svart finish og er klar til å bli montert rett på bilen din. Blir levert i en vanlig svart ABS finish, er det mulig å ha disse delene fargekodet til bilen (ikke inkludert).    

Takrails i Aluminium/Plast till VW Transporter T6 L1 2016- For biler med Kort aksel avstand 300 cm. Monteres i de orginale tak stativ festene på taket. enkel montering. Leveres i Høyre og Venstre  

Takrails i Aluminium/Plast till VW Transporter T6 L2 2016-   For biler med Lang aksel avstand 340 cm.     Monteres i de orginale tak stativ festene på taket. enkel montering.     Leveres i Høyre og Venstre