Scenic Models

Name: Dog Bone Engine Mount Bush KitProduct Notes: PFF60-206K will fit Phase 1 Petrol 172 models only & 2.0 Megane 2.0 petrol & 1.9 diesel models. PFF60-211K will fit Phase 2 Petrol 172 & 182 Sport Models Only. Weight: 447

Name: Front Anti Roll Bar Bush - 20mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20mmWeight: 207

Name: Front Anti Roll Bar Bush - 20mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20mmWeight: 207

Name: Front Anti Roll Bar Bush - 22mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 22mmWeight: 207

Name: Front Anti Roll Bar Bush - 22mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20mmWeight: 207

Name: Front Anti Roll Bar Bush 20.5mmProduct Notes: This bush is half the length of the bracket and uses a spacer, for models with full bush with no spacer use PFF60-503-*. Bush Size: 20.5mmWeight: 119

Name: Front Anti Roll Bar Bush 21mmProduct Notes: This part suits 21mm anti roll bars. This bush is half the length of the bracket and uses a spacer, for models with full bush with no spacer use PFF60-503-*. Bush Size: 21mmWeight: 119

Name: Front Anti Roll Bar Inner Bush 23mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 23mmWeight: 116

Name: Front Anti Roll Bar Inner Bush 24mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 24mmWeight: 104

Name: Front Anti Roll Bar Outer MountProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 23mmWeight: 114

Name: Front Arm Front BushProduct Notes: Weight: 319Fitting Instructions

Name: Front Arm Front BushProduct Notes: Weight: 319Fitting Instructions

Name: Front Arm Front BushProduct Notes: For pressed steel arms Weight: 704Fitting Instructions

Name: Front Arm Front BushProduct Notes: For pressed steel arms Weight: 704Fitting Instructions

Name: Front Arm Front Bush Camber AdjustableProduct Notes: Weight: 448Fitting Instructions

Name: Front Arm Front Bush Camber AdjustableProduct Notes: Weight: 448Fitting Instructions

Name: Front Arm Rear BushProduct Notes: For pressed steel arms Weight: 907Fitting Instructions

Name: Front Arm Rear BushProduct Notes: For pressed steel arms Weight: 907Fitting Instructions

Name: Front Arm Rear Bush Product Notes: Weight: 770 Fitting Instructions

Name: Front Arm Rear BushProduct Notes: This part replaces OE number: 8200041166. Weight: 770Fitting Instructions

Name: Front Arm Rear Bush Caster OffsetProduct Notes: This part provides additional caster offset. For a non adjustable bush use PFF60-501. Weight: 775Fitting Instructions

Name: Front Arm Rear Bush Caster OffsetProduct Notes: This part provides additional caster offset. For a non adjustable bush use PFF60-501. Weight: 775Fitting Instructions

Name: Front Lower Wishbone BushProduct Notes: Weight: 1477Fitting Instructions

Name: Front Lower Wishbone Bush, Camber AdjustableProduct Notes: PFF60-301G front lower wishbone bush is on-car adjustable with the supplied C spanner. It has a range of +/- 0.75 degrees camber adjustment enabling the geometry to be fine-tuned, thus improving the handling. For a non-adjustable bush, please use PFF60-301. Weight: 1656Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 122Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 122Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: This is an insert that fits into and fills voids in the original rubber bush in lower engine mount. Fits Clio III ,Megane II, Kangoo II and Scenic II 1.5L Diesel models. Also fits 1.6L Petrol Clio III and Kangoo II. Weight: 156

Name: Lower Engine Mount InsertProduct Notes: This is an insert that fits into and fills voids in the original rubber bush in lower engine mount. Fits Clio III ,Megane II, Kangoo II and Scenic II 1.5L Diesel models. Also fits 1.6L Petrol Clio III and Kangoo II. Weight: 156

Name: Lower Engine Mount InsertProduct Notes: Fits Clio III Sport & Megane II Sport models inc RS. - This is an insert that fits into and fills voids in the original rubber bush in lower engine mount OE part numbers: 8200042454. This mount is rubber coated. it has been superseded with an alloy extruded bracket part number 8200777542 the insert wont fit the later part. An insert PFF60-526 is available for this part Weight: 156

Name: Lower Torque Mount - Fast Road/TrackProduct Notes: PFF60-8026 Lower Torque Mount featuresa CNC machined and laser-etched aluminium bracket, combining ourPurple 80A and Black 95A durometermaterials and is recommended for more heavily tuned road or occasional track cars. Reducing engine/transmovement by way of an upgradedtorque mount has the following benefits:Sharper throttle responseMore accurate gear changesReduced wheel-hopImproved TractionMore balanced on/off throttle handlingThe two-part composite design of the larger bush improves the mount's durability in high-power applications, whilst still limiting vibration and reducing excessive stress on the powertrain. Get the power down faster and make gearshifts that bit crisper with Powerflex. Weight: 830Fitting Instructions

Name: Lower Torque Mount - Fast Road/TrackProduct Notes: PFF60-8025P is a further 20% stiffer than PFF60-8025 being made solely in our Purple 80A durometer material and is recommended for more heavily tuned road or occasional track cars. A small increase in NVH, usually at idle should be expected when stiffening the connecting mount between the engine/transmission and subframe. For an insert only use PFF60-820 (only fits pressed, rubber-coated OEM mount). Weight: 770Fitting Instructions

Name: Lower Torque Mount - RoadProduct Notes: PFF60-8026 Lower Torque Mount featuresa CNC machined and laser-etched aluminium bracket, combining ourYellow 70A and Purple 80A durometermaterials for a sporty powertrain upgrade to standard or mildly tuned vehicles. Reducing engine/transmovement by way of an upgradedtorque mount has the following benefits:Sharper throttle responseMore accurate gear changesReduced wheel-hopImproved TractionMore balanced on/off throttle handlingThe two-part composite design of the larger bush improves the mount's durability in high-power applications, whilst still limiting vibration and reducing excessive stress on the powertrain. Get the power down faster and make gearshifts that bit crisper with Powerflex. Weight: 830Fitting Instructions