Peugeot

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Measure bar diameter and select correct size for your car. Bush Size: 24mmWeight: 173

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Measure bar diameter and select correct size for your car. Bush Size: 25mmWeight: 173

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Measure bar diameter and select correct size for your car. Bush Size: 25mmWeight: 173

Name: Front Anti Roll Bar Bush To Chassis Bush 20mmProduct Notes: Bush Size: 20mmWeight: 144Fitting Instructions

Name: Front Anti Roll Bar Bush To Chassis Bush 20mmProduct Notes: Bush Size: 20mmWeight: 144Fitting Instructions

Name: Front Anti Roll Bar Bush To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 144Fitting Instructions

Name: Front Anti Roll Bar Bush To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 144Fitting Instructions

Name: Front Anti Roll Bar Bush To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 132

Name: Front Anti Roll Bar Bush To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 132

Name: Front Anti Roll Bar Mount (Inner) 22mmProduct Notes: Fits Peugeot Gti and Rally Models Only and Citroen Saxo (inc VTS) Bush Size: 22mmWeight: 98

Name: Front Anti Roll Bar Mount (Inner) 22mmProduct Notes: Fits Peugeot Gti and Rally Models Only and Citroen Saxo (inc VTS) Bush Size: 22mmWeight: 98

Name: Front Anti Roll Bar To Chassis Bush 25mmProduct Notes: Replaces anti roll bar bushes that use a two part bracket to secure the bush to the vehicle. Use PFF16-204-25 for vehicles that only has an upper bracket to secure the bush. Bush Size: 25mmWeight: 100

Name: Front Anti Roll Bar To Chassis Bush 25mmProduct Notes: Replaces anti roll bar bushes that only has an upper bracket to secure the bush to the vehicle. Use PFF16-203-25 for vehicles that use a two part bracket. Bush Size: 25mmWeight: 205

Name: Front Arm Front BushProduct Notes: Weight: 477Fitting Instructions

Name: Front Arm Front BushProduct Notes: PFF50-401 should not be used to replace the spherical joint as fitted to 206 GTi 180, XS, S16 and RC models (part number 3523AS). Weight: 540Fitting Instructions

Name: Front Arm Front BushProduct Notes: PFF50-401 should not be used to replace the spherical joint as fitted to 206 GTi 180, XS, S16 and RC models (part number 3523AS). Weight: 540Fitting Instructions

Name: Front Arm Front BushProduct Notes: Weight: 575Fitting Instructions

Name: Front Arm Front BushProduct Notes: Weight: 575Fitting Instructions

Name: Front Arm Rear BushProduct Notes: Weight: 515Fitting Instructions

Name: Front Arm Rear Bush Product Notes: This is used on the front and rear positions. You will need to order 4 bushes for a complete car set. Bush Size: 56mm OD with 14mm IDWeight: 589Fitting Instructions

Name: Front Arm Rear BushProduct Notes: This is used on the front and rear positions. You will need to order 4 bushes for a complete car set. Bush Size: 55mm OD and 18mm IDWeight: 499Fitting Instructions

Name: Front Arm Rear BushProduct Notes: This is used on the front and rear positions. You will need to order 4 bushes for a complete car set. Bush Size: 55mm OD and 18mm IDWeight: 499Fitting Instructions

Name: Front Arm Rear Bush Product Notes: This is used on the front and rear positions. You will need to order 4 bushes for a complete car set. Bush Size: 56mm OD with 14mm IDWeight: 589Fitting Instructions

Name: Front Arm Rear BushProduct Notes: Weight: 515Fitting Instructions

Name: Front Arm Rear Bush Anti-Lift & Caster Offset Product Notes: Offers anti-dive and anti-lift characteristics and increases caster by 0.5 deg. It comes complete with the bush, alloy bracket, bolt and washers. Weight: 529Fitting Instructions

Name: Front Arm Rear Bush Anti-Lift & Caster Offset Product Notes: Offers anti-dive and anti-lift characteristics and increases caster by 0.5 deg. It comes complete with the bush, alloy bracket, bolt and washers. Weight: 529Fitting Instructions

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF80-1102 Front Arm Rear Bush Caster Adjust has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0 of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased considerably over standard rubber. Suitable for Road and Black Series applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1434Fitting Instructions

Name: Front Lower Engine MountProduct Notes: A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted, especially on diesel vehicles. Weight: 296

Name: Front Lower Engine MountProduct Notes: A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted, especially on diesel vehicles. Weight: 296

Name: Front Lower Wishbone Front Bush Product Notes: Weight: 577Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: Fits C5 models with non-active (non-VH10) MacPherson suspension found in Asian markets.Fits 508 RXH Hybrid 4X4 models.Our bush allows free rotation, avoiding torsional twist in the material which is the main cause of failure for the OE rubber bush.PFF12-502 boosts stiffness over the original rubber bush by almost 50%for improved suspension performance and increased longevity. Weight: 1044Fitting Instructions

Name: Front Strut Top Mount BushProduct Notes: PFF50-230 Front Strut Top Mount Bush is made from our Grey 80A durometer material, it's a durable fit-and-forget replacement for the OE rubber mount making it a must-do mod when upgrading suspension to give a firmer and more positive damping feel. Powerflex PFF50-430 vs. a worn orgiginal rubber mount Weight: 202