MERIVA MODELS

Name: Engine Mount Insert Right SideProduct Notes: This polyurethane bush fits into the original rubber bush mount as an insert. It is designed to limit movement of the engine to provide additional stability under acceleration. PFF80-1031 Engine Mount Insert Right Side is a clever two-piece design that fits into the OE rubber mount to reduce movement. Weight: 379Fitting Instructions

Name: Engine Mount Insert Right SideProduct Notes: This polyurethane bush fits into the original rubber bush mount as an insert. It is designed to limit movement of the engine to provide additional stability under acceleration. PFF80-1031 Engine Mount Insert Right Side is a clever two-piece design that fits into the OE rubber mount to reduce movement. Weight: 379Fitting Instructions

Name: Front Anti Roll Bar Bush 21mm (1 Piece)Product Notes: This bush replaces the original single piece design, if your vehicle uses a 2 piece design use PFF80-1203-* Bush Size: 21mmWeight: 78

Name: Front Anti Roll Bar Bush 21mm (1 Piece)Product Notes: This bush replaces the original single piece design, if your vehicle uses a 2 piece design use PFF80-1203-* Bush Size: 21mmWeight: 78

Name: Front Anti Roll Bar Mounting Bush 24mm (2 Piece)Product Notes: This replaces the original 2 piece design. For the single-piece design please use PFF66-503-*. For the Astra MK5 single-piece design, please use PFF80-1303-* Weight: 121

Name: Front Anti Roll Bar Mounting Bush 24mm (2 Piece)Product Notes: This replaces the original 2 piece design. For the single-piece design please use PFF66-503-*. For the Astra MK5 single-piece design, please use PFF80-1303-* Weight: 121

Name: Front Arm Rear BushProduct Notes: Weight: 569Fitting Instructions

Name: Front Arm Rear BushProduct Notes: Weight: 569

Name: Front Lower Engine Mount BushProduct Notes: This polyurethane bush replaces the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 587

Name: Front Lower Engine Mount BushProduct Notes: This polyurethane bush replaces the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 587

Name: Front Wishbone Front BushProduct Notes: Weight: 336

Name: Front Wishbone Front BushProduct Notes: Weight: 336

Name: Front Wishbone Front Bush Product Notes: Weight: 528Fitting Instructions

Name: Front Wishbone Front Bush Product Notes: Weight: 528Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Weight: 408

Name: Front Wishbone Rear BushProduct Notes: Weight: 408

Name: Gearbox Mount Insert Product Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 194Fitting Instructions

Name: Gearbox Mount Insert Product Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 194Fitting Instructions

Name: Gearbox Mount Insert (Diesel)Product Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 194Fitting Instructions

Name: Lower Radiator MountProduct Notes: Weight: 142

Name: Lower Radiator MountProduct Notes: Weight: 142

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Beam Mounting BushProduct Notes: Fits rear beams with a 60mm diameter bush Bush Size: 60mmWeight: 1112

Name: Rear Beam Mounting BushProduct Notes: Fits rear beams with a 60mm diameter bush Bush Size: 60mmWeight: 1112

Name: Rear Beam Mounting BushProduct Notes: PFR80-1310 fits vehicles without Watt's linkage. For vehicles with Watt's linkage, please use PFR80-1410. Weight: 1247Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: PFR80-1310 fits vehicles without Watt's linkage. For vehicles with Watt's linkage, please use PFR80-1410. Weight: 1247Fitting Instructions

Name: Rear Lower Engine Mount Rear BushProduct Notes: This polyurethane bush replaces the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 209

Name: Rear Lower Engine Mount Rear BushProduct Notes: This polyurethane bush replaces the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 209