Land Rover

Name: Front Wishbone Rear Bush Product Notes: PFF32-702 is atwo-piece polyurethane bush that fits the pressed steel OE bracket. The kit includes a Black 95Adurometer inner bush with an internal supporting washer and aPurple 80A outer bush featuring a knurled bore for grease retention, resulting in a 400% increase in stiffness over the worn OE bush.The two parts turn independently, allowing freer rotation and reducing torsional stress in the bush for a lasting solution and to restore steering response, braking stability, vehicle handling and tyre longevity without compromising comfort. Fits aluminium arms only. Weight: 920

Name: Front Wishbone Rear BushProduct Notes: Weight: 994

Name: Lower Engine Mount InsertProduct Notes: PFF88-1130 Lower Engine Mount Insert is made using our Yellow 70A durometer material and designed to fill the voiding of the original lower engine mount. By doing so, it stiffens the rubber mount reducing engine/trans movement during acceleration and smooths out gearshifts for an improved driving experience. Fits Volvo S60, V70, S80, XC60, XC70 with B6* 3.0/3.2 6Cyl engines, Ford Mondeo MK4 ST, S-Max ST with the 2.5 Duratec engine, Land Rover Discovery Sport 1 and Freelander 2 with 2.0L Turbo Petrol engines and Range Rover Evoque L538 2.0L Turbo Petrol models and 2.2L Diesel manual models. Weight: 99Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: PFF88-1130BLK Lower Engine Mount Insert is made using our Black 95A durometer material and designed to fill the voiding of the original lower engine mount. By doing so, it stiffens the rubber mount reducing engine/trans movement during acceleration and smooths out gearshifts for an improved driving experience. Fits Volvo S60, V70, S80, XC60, XC70 with B6* 3.0/3.2 6Cyl engines, Ford Mondeo MK4 ST, S-Max ST with the 2.5 Duratec engine, Land Rover Discovery Sport 1 and Freelander 2 with 2.0L Turbo Petrol engines and Range Rover Evoque L538 2.0L Turbo Petrol models and 2.2L Diesel manual models. Increased NVH will be experienced by fitting this part. Weight: 99Fitting Instructions

Name: Panhard Rod Bush 30mmProduct Notes: This part fits vehicles up to VIN 2A626645. For later vehicles please use PFF32-301. Bush Size: 30mm ODWeight: 163

Name: Panhard Rod Bush 30mmProduct Notes: This part fits vehicles up to VIN 2A626645. For later vehicles please use PFF32-301. Bush Size: 30mm ODWeight: 163

Name: Panhard Rod Bush 35mmProduct Notes: Fits the Defender from VIN 2A626646 and Post-95 Range Rover P38 only. Bush Size: 35mm ODWeight: 207

Name: Panhard Rod Bush 35mmProduct Notes: Fits the Defender from VIN 2A626646 and Post-95 Range Rover P38 only. Bush Size: 35mm ODWeight: 207

Name: PowerAlign Camber Bolt Kit (16mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your toolkit so that you can make pit garage adjustments to your suspension using PowerAlignCamber Bolts? Bush Size: M16 x 75mmWeight: 356Fitting Instructions

Name: Powerflex Handling Pack Product Notes: Included within this pack are the following parts:PFF32-101Panhard Rod Bush 30mmPFF32-107Front Radius Arm Front BushPFF32-109Front Radius Arm Rear BushPFR32-110A-Frame to Chassis BushPFR32-111Rear Radius Arm Front BushPFR32-112Rear Radius Arm Rear BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 4010

Name: Powerflex Handling Pack Product Notes: Included within this pack are the following parts:PFF32-101Panhard Rod Bush 30mmPFF32-108Front Radius Arm Front BushPFF32-109Front Radius Arm Rear BushPFR32-110A-Frame to Chassis BushPFR32-111Rear Radius Arm Front BushPFR32-112Rear Trailing Arm to Axle BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 4010

Name: Powerflex Handling Pack Product Notes: Included within this pack are the following parts:PFF32-301Panhard Rod Bush 35mmPFF32-108Front Radius Arm Front BushPFF32-109Front Radius Arm Rear BushPFR32-110A Frame to Chassis BushPFR32-111Rear Radius Arm Front BushPFR32-112Rear Radius Arm Rear BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 4010

Name: Radius Arm to Chassis Bush Product Notes: Weight: 1156

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90, 110, 120, except 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 271

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90, 110, 120, except 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 271

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 110 and 130 models. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 323

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 100

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 100

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: This part fits vehicles without ACE suspension, for vehicles fitted with ACE please use PF32-603-35. Bush Size: 19mmWeight: 335

Name: Rear Anti Roll Bar Bush 22mmProduct Notes: Fits Range Rover Sport Models without Ace Suspension. Bush Size: 22mmWeight: 287

Name: Rear Anti Roll Bar Bush 26.5mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 26.5mmWeight: 291

Name: Rear Anti Roll Bar Bush 28mmProduct Notes: Fits 110 and 130 models. Please check anti roll bar diameter before ordering. Bush Size: 28mmWeight: 320

Name: Rear Anti Roll Bar Bush 28mmProduct Notes: Fits 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 28mmWeight: 100

Name: Rear Anti Roll Bar Bush 34mmProduct Notes: Fits Range Rover Sport 2005 to 2013 Models with Ace Suspension only. Bush Size: 34mmWeight: 220

Name: Rear Bump Stop Lowered - 40mmProduct Notes: This part is designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively. Bush Size: 40mm TallWeight: 979

Name: Rear Lower Arm Front Bush Product Notes: Weight: 1031

Name: Rear Lower Arm Rear Bush Product Notes: Weight: 1119

Name: Rear Lower Front Control Arm Inner Bush Product Notes: Weight: 558Fitting Instructions

Name: Rear Lower Front Control Arm Outer Bush Product Notes: Weight: 578Fitting Instructions

Name: Rear Lower Rear Control Arm Outer Bush Product Notes: Weight: 578Fitting Instructions

Name: Rear Lower Wishbone Front BushProduct Notes: PFR32-410 Rear Lower Wishbone Front Bush features tapered voiding to allow a controlled amount of movement and is made using our Shore 80A Purple material. Weight: 1107Fitting Instructions

Name: Rear Lower Wishbone Rear BushProduct Notes: PFR32-411 Rear Lower Wishbone Rear Bush is made using our Shore 95A Black material to replicate the stiffness of the original bush it replaces, OE number: RGX500111. Weight: 570