Lancia

Name: Exhaust MountProduct Notes: Weight: 50Fitting Instructions

Name: Front Anti Roll Bar Bush 17mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 17mmWeight: 114

Name: Front Anti Roll Bar Bush 17mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 17mmWeight: 114

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 18mmWeight: 112

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 18mmWeight: 112

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 114

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 114

Name: Front Anti Roll Bar Inner Bush 16mmProduct Notes: Weight: 213

Name: Front Anti Roll Bar Inner Bush 16mmProduct Notes: Bush Size: 16mmWeight: 213

Name: Front Anti Roll Bar Inner Bush 24mmProduct Notes: This bush is designed to fit anti-roll bars with a 24mm diameter, however, the bush has a 27.4mm bore to fit over a metal collar hidden by the original bush. This collar is retained by clamps that prevent the bush and bracket from moving side to side which is why it should be retained. Bush Size: 24mmWeight: 112Fitting Instructions

Name: Front Anti Roll Bar Inner Bush 24mmProduct Notes: This bush is designed to fit anti-roll bars with a 24mm diameter, however, the bush has a 27.4mm bore to fit over a metal collar hidden by the original bush. This collar is retained by clamps that prevent the bush and bracket from moving side to side which is why it should be retained. Bush Size: 24mmWeight: 112Fitting Instructions

Name: Front Anti Roll Bar Inner Bush 24mmProduct Notes: This bush is designed to fit anti-roll bars with a 24mm diameter, however, the bush has a 27.4mm bore to fit over a metal collar hidden by the original bush. This collar is retained by clamps that prevent the bush and bracket from moving side to side which is why it should be retained. Weight: 112

Name: Front Anti Roll Bar Outer BushProduct Notes: Weight: 106

Name: Front Anti Roll Bar Outer Bush Product Notes: Weight: 106

Name: Front Anti Roll Bar Outer Bush Product Notes: Weight: 106

Name: Front Anti Roll Bar Outer Bush 16mm Product Notes: Bush Size: 16mmWeight: 134

Name: Front Anti Roll Bar Outer Bush 16mmProduct Notes: Bush Size: 16mmWeight: 134

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 115Fitting Instructions

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 115Fitting Instructions

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 115Fitting Instructions

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 115Fitting Instructions

Name: Front Anti Roll Bar To Chassis Bush 23mmProduct Notes: Bush Size: 23mmWeight: 121

Name: Front Anti Roll Bar To Chassis Bush 23mmProduct Notes: Bush Size: 23mmWeight: 121

Name: Front Anti Roll Bar To Chassis Bush 25mmProduct Notes: Replaces anti roll bar bushes that use a two part bracket to secure the bush to the vehicle. Use PFF16-204-25 for vehicles that only has an upper bracket to secure the bush. Bush Size: 25mmWeight: 100

Name: Front Anti Roll Bar To Chassis Bush 25mmProduct Notes: Replaces anti roll bar bushes that only has an upper bracket to secure the bush to the vehicle. Use PFF16-203-25 for vehicles that use a two part bracket. Bush Size: 25mmWeight: 205

Name: Front Lower Wishbone Front BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 304Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 304Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 304Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

Name: Front Right Hand Engine Mount Product Notes: Made using our 70A durometer material, our new engine mounts include all the fitting hardware required to quickly revitalise the performance of the engines mounting points. Weight: 1000Fitting Instructions