Lancer Evolution VII, VIII & IX inc 260 (2001 - 2007)

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Bush Size: 24mmWeight: 94

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Bush Size: 24mmWeight: 94

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Bush Size: 26mmWeight: 87

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Bush Size: 26mmWeight: 87

Name: Front Anti Roll Bar Bush 29mmProduct Notes: Bush Size: 29mmWeight: 77

Name: Front Anti Roll Bar Bush 29mmProduct Notes: Bush Size: 29mmWeight: 77

Name: Front Lower Diff Mount (Road)Product Notes: PFF44-108R is made in our Yellow 70A material and recommend for road use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 62mm Diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 70.5mm DiameterWeight: 330

Name: Front Lower Diff Mount (Track)Product Notes: PFF44-108 is made in our Purple 80A material and recommend for track use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 62mm Diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 70.5mm DiameterWeight: 330

Name: Front Lower Front Engine Mount (MSport)Product Notes: PFF44-106BLK is made in our Black 95A material and recommend for motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Bush Size: 81mmWeight: 454

Name: Front Lower Front Engine Mount (Road)Product Notes: PFF44-106R is made in our Yellow 70A material and recommend for road use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Bush Size: 81mmWeight: 454

Name: Front Lower Front Engine Mount (Track)Product Notes: PFF44-106 is made in our Purple 80A material and recommend for track use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Bush Size: 81mmWeight: 454

Name: Front Lower Rear Diff Mount (MSport)Product Notes: PFF44-107BLK is made in our Black 95A material and recommend for motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 60mm in diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 60mm DiameterWeight: 268

Name: Front Lower Rear Diff Mount (MSport)Product Notes: PFF44-108BLK is made in our Black 95A material and recommend for motosport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 62mm Diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 70.5mm DiameterWeight: 330

Name: Front Lower Rear Diff Mount (Road)Product Notes: PFF44-107R is made in our Yellow 70A material and recommend for road use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 60mm in diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 60mm DiameterWeight: 268

Name: Front Lower Rear Diff Mount (Track)Product Notes: PFF44-107 is made in our Purple 80A material and recommend for track use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 60mm in diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 60mm DiameterWeight: 268

Name: Front Upper Engine/Trans Mount (MSport)Product Notes: This bush fits both the Upper Engine and Gearbox Mount positions. PFF44-105BLK is made in our Black 95A material and recommend for motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 1500Fitting Instructions

Name: Front Upper Engine/Trans Mount (Road)Product Notes: This bush fits both the Upper Engine and Gearbox Mount positions. PFF44-105R is made in our Yellow 70A material and recommend for road use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 1500Fitting Instructions

Name: Front Upper Engine/Trans Mount (Track)Product Notes: This bush fits both the Upper Engine and Gearbox Mount positions. PFF44-105 is made in our Purple 80A material and recommend for track use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 1500Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Check bolt size. This bush uses a 14mm Bolt. For 12mm bolt use PFF44-101. Weight: 304

Name: Front Wishbone Front BushProduct Notes: Check bolt size. This bush uses a 14mm Bolt. For 12mm bolt use PFF44-101BLK. Weight: 304

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: This part provides +/- 0.33 degrees of on-car caster adjustment combined with an additional 6mm anti-lift offset. This bush is designed for use on standard travel suspension. Suitable for Road and Black Series applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1147Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: This part provides +/- 0.33 degrees of on-car caster adjustment combined with an additional 6mm anti-lift offset. This bush is designed for use on standard travel suspension. Suitable for Road and Black Series applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment.Weight: 1147Fitting Instructions

Name: PowerAlign Camber Bolt Kit (14mm) Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts? Bush Size: M14 x 70mm Weight: 261 Fitting Instructions

Name: Rear Anti Roll Bar Bush 22mmProduct Notes: Bush Size: 22mmWeight: 83

Name: Rear Anti Roll Bar Bush 22mmProduct Notes: Bush Size: 22mmWeight: 83

Name: Rear Anti Roll Bar Bush 24mmProduct Notes: Bush Size: 24mmWeight: 85

Name: Rear Anti Roll Bar Bush 24mmProduct Notes: Bush Size: 24mmWeight: 85

Name: Rear Anti Roll Bar Bush 27mmProduct Notes: Bush Size: 27mmWeight: 79

Name: Rear Anti Roll Bar Bush 27mmProduct Notes: Bush Size: 27mmWeight: 79

Name: Rear Diff Front Mounting BushProduct Notes: Fits AYC rear differentials only. Does not fit RS models. For RS models use PFR44-420. Bush Size: 54mmWeight: 513

Name: Rear Diff Front Mounting BushProduct Notes: Fits AYC rear differentials only. Does not fit RS Models, for RS models use PFR44-420 Bush Size: 54mmWeight: 513

Name: Rear Diff Front Mounting Bush, RS OnlyProduct Notes: Fits RS and non-AYC vehicles only. For vehicles fitted with AYC use PFR44-120 Bush Size: 45mmWeight: 598Fitting Instructions