Z4 Series

Name: Front Radius Arm To Chassis Bush Caster AdjustProduct Notes: PFF5-401G Front Radius to Chassis Bush Caster Adjustable to provide up to +/- 0.75 degrees of on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry. Made in our stiffest Black 95A material and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combines all of the necessary ingredients to be perfectly suited to both road and track use. Over the years we have seen a shift in the use of cars such as theBMW E92 M3 andE82 1M Coupe, with more of their time being spent on track and the power, chassis and braking modifications carried out, taking them from being quick road cars to very able and incredibly fast road-legal racers.Made in our stiffest Black 95Amaterial and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combinesall of the necessary ingredients to be perfectly suited to both road and track use.PFF5-401G Front Radius to Chassis Bush Caster Adjustableto provide up to+/- 0.75 degreesof on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry.This change in design increases stiffness by a further 25% over our previous offering for improved durability and braking stabilityand a 140% increase over the worn rubber bush. Weight: 1629Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mm Weight: 502 Fitting Instructions

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601 is a high-performance option to PFF5-4601 and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Bush Size: 66mmWeight: 744Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601 is a high performance option to PFF5-4601, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Bush Size: 66mmWeight: 744Fitting Instructions

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G offers additional +0.5 of caster over PFF5-5601 and is a high performance option to PFF5-4601, and aimed at offering greater precision with improved geometry for people wanting the very best from their E46 or Z4. Testing during the development of this bush has indicated stiffness gains of 190% compared with the original rubber bush. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Bush Size: 66mmWeight: 788Fitting Instructions

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G offers additional +0.5 of caster over PFF5-5601 and is a high performance option to PFF5-4601, and aimed at offering greater precision with improved geometry for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases stiffness by 28%, to give an 190% increase in stiffness over the original part Bush Size: 66mmWeight: 788Fitting Instructions

Name: Gear Shift Arm Front Bush OvalProduct Notes: Depending on vehicle application, this part can be 1 or 2 per car. Size 22mm W x 17mm H x 26mm L. Bush Size: 22mm x 17mm x 26mmWeight: 26

Name: Gear Shift Arm Front Bush OvalProduct Notes: Depending on vehicle application, this part can be 1 or 2 per car. Size 22mm W x 17mm H x 26mm L. Bush Size: 22mm x 17mm x 26mmWeight: 26

Name: Jack Pad AdaptorProduct Notes: PF5-4660 is a polyurethane jack pad to fit into the plastic lifting points found on most modern BMW and related vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles: BMW 1 Series E81, E87, E88 (2004 - 2013) BMW 1 M E82 (2010 - 2012) BMW 1 Series F20, F21 (2011 - 2019) BMW 1 Series F40 (2018 on) BMW 1 Series F52 (2017 on) BMW 2 Series F22, F23 (2013 - 2020) BMW 2 Series Gran Coupe F44 (2019 on) BMW 2 Series Active Tourer F45, F46 (2014 - 2019) BMW M2 F87 (2015 on) BMW 3 Series E46 (1999 - 2006) BMW 3 Series E90, E91, E92, E93 (2005 - 2013) BMW 3 Series F30, F31, F34 (2011 - 2018) BMW M3 F80 (2011 - 2018) BMW 3 Series G20, G21, G28 (2018 on) BMW M3 G80 (2018 on) BMW 4 Series F32, F33, F36 (2013 - 2021) BMW M4 F82, F83 (2013 - 2021) BMW 4 Series G22, G23 (2020 on) BMW M4 G82, G83 (2020 on) BMW 5 Series E39 (1996 - 2004) BMW 5 Series E60, E61 (2003 - 2010) BMW 5 Series Gran Turismo F07 (2009 - 2016) BMW 5 Series F10, F11 (2010 - 2016) BMW 5 Series G30, G31 (2016 on) BMW M5 F90 (2017 on) BMW 6 Series E63, E64 (2003 - 2010) BMW 6 Series F06, F12, F13 (2011 - 2018) BMW 6 Series Gran Turismo G32 (2017 on) BMW 7 Series E38 (1994 - 2002) BMW 7 Series E65, E66, E67 (2001 - 2008) BMW 7 Series F01, F02, F03, F04 (2007 - 2016) BMW 7 Series G11, G12 (2015 on) BMW M8 F91, F92, F93 (2019 on) BMW 8 Series G14, G15, G16 (2018 on) BMW X1 E84 (2008 - 2015) BMW X1 F48 (2016 on) BMW X2 F39 (2017 on) BMW X3 E83 (2003 - 2010) BMW X3 F25 (2009 - 2017) BMW X3 F97, G01 (2017 on) BMW iX3 G08 (2020 on) BMW X4 F26 (2013 - 2018) BMW X4 F98, G02 (2018 on) BMW X5 E53 (1999 - 2006) BMW X5 E70 (2006 - 2013) BMW X5 F15, F85 (2013 - 2019)BMW X5 F85 M (2013 - 1018) BMW X5 F95, G05 (2018 on) BMW X6 E71, E72 (2007 - 2014) BMW X6 F16, F86 (2015 - 2019) BMW X6 F96, G06 (2019 on) BMW X7 G07 (2018 on) BMW Z4 E85, E86 (2003 - 2009) BMW Z4 E89 (2009 - 2018) BMW Z4 G29 (2018 on) Mini Hatch R50, R53 (2000 - 2006) Mini Hatch R56 (2006 - 2013) Mini Hatch F55, F56 (2014 on) Mini Cabriolet R52 (2000 - 2006) Mini Cabriolet R57 (2006 - 2013) Mini Cabriolet F57 (2014 on) Mini Clubman R55 (207 - 2014) Mini Clubman F54 (2015 on) Mini Countryman F60 (2017 on) Mini Coupe R58 (2011 - 2015) Mini Roadster R59 (2012 - 2015) Rolls Royce Ghost RR4 (2008 - 2018) Rolls Royce Phantom RR1 (2003 - 2017) Rolls Royce Phantom RR11, RR12 (2017 on) Rolls Royce Wraith RR5 (2012 - 2018) Rolls Royce Dawn RR6 (2015 - 2018) Rolls Royce Cullinan RR31 (2017 on) Toyota Supra MK5 J29 (2019 on) Bush Size: 80mm DiameterWeight: 136

Name: Offset Lower Radiator Mount KitProduct Notes: Made in our Grey 65A durometer material, the offset bushes move the bottomof the radiator forward by 8mm to add needed clearance for the expansion tank/pulley on larger core radiators and to prevent it from touching and causing a potentially catastrophic engine failure, especially if the engine mounts are worn. They can also be fitted without draining down the coolant system and removing the radiator, making them an easy swap out. Weight: 57Fitting Instructions

Name: Offset Lower Radiator Mount KitProduct Notes: Made in our Red 65A durometer material, the offset bushes move the bottomof the radiator forward by 8mm to add needed clearance for the expansion tank/pulley on larger core radiators and to prevent it from touching and causing a potentially catastrophic engine failure, especially if the engine mounts are worn. They can also be fitted without draining down the coolant system and removing the radiator, making them an easy swap out. Weight: 57Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Anti Roll Bar Bush 22.5mmProduct Notes: Fits M3 CSL and Z4M models - Please check anti roll bar diameter before ordering Bush Size: 22.5mmWeight: 167

Name: Rear Anti Roll Bar Bush 22.5mmProduct Notes: Fits M3 CSL and Z4M models - Please check anti roll bar diameter before ordering Bush Size: 22.5mmWeight: 167

Name: Rear Anti Roll Bar Bush 22.5mmProduct Notes: Fits M3 CSL and Z4M models - Please check anti roll bar diameter before ordering Bush Size: 22.5mmWeight: 167

Name: Rear Anti Roll Bar Mounting Bush 15mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 15mmWeight: 93

Name: Rear Anti Roll Bar Mounting Bush 18mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 18mmWeight: 82

Name: Rear Anti Roll Bar Mounting Bush 18mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 18mmWeight: 82

Name: Rear Anti Roll Bar Mounting Bush 19mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 19mmWeight: 78

Name: Rear Anti Roll Bar Mounting Bush 19mmProduct Notes: Please check anti-roll bar diameter before ordering. Bush Size: 19mmWeight: 78

Name: Rear Anti Roll Bar Mounting Bush 21.5mmProduct Notes: Fits M3 Models Only - Please check anti roll bar diameter before ordering Bush Size: 21.5mmWeight: 160

Name: Rear Anti Roll Bar Mounting Bush 21.5mmProduct Notes: Fits M3 Models Only - Please check anti roll bar diameter before ordering Bush Size: 21.5mmWeight: 160

Name: Rear Anti Roll Bar Mounting Bush 21.5mmProduct Notes: Fits M3 Models Only - Please check anti roll bar diameter before ordering Bush Size: 21.5mmWeight: 160

Name: Rear ARB End Link To Arm BushProduct Notes: It will not fit E24 6 series models built before 05/1982. Weight: 85Fitting Instructions

Name: Rear ARB End Link To Arm BushProduct Notes: It will not fit E24 6 series models built before 05/1982. Weight: 85Fitting Instructions

Name: Rear ARB End Link To Bar BushProduct Notes: It will not fit E24 6 series models built before 05/1982. Weight: 54Fitting Instructions

Name: Rear ARB End Link To Bar BushProduct Notes: It will not fit E24 6 series models built before 05/1982. Weight: 54Fitting Instructions

Name: Rear Diff Front BushProduct Notes: Weight: 378Fitting Instructions