Z Series

Name: Front Anti Roll Bar Mounting Bush 25mmProduct Notes: Check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 236

Name: Front Anti Roll Bar Mounting Bush 25mmProduct Notes: Check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 236

Name: Front Anti Roll Bar Mounting Bush 25mmProduct Notes: Bush Size: 25mmWeight: 236

Name: Front Anti Roll Bar Mounting Bush 26.5mmProduct Notes: Bush Size: 26.5mmWeight: 322

Name: Front Anti Roll Bar Mounting Bush 26.5mmProduct Notes: Please check Anti roll bar size before ordering Bush Size: 26.5mmWeight: 322

Name: Front Anti Roll Bar Mounting Bush 27mmProduct Notes: Fits Cabriolet and Roadster models only. Please check Anti roll bar size before ordering Bush Size: 27mmWeight: 308

Name: Front Anti Roll Bar Mounting Bush 27mmProduct Notes: Fits Cabriolet and Roadster models only. Please check Anti roll bar size before ordering Bush Size: 27mmWeight: 308

Name: Front Anti Roll Bar Mounting Bush 27mmProduct Notes: Fits Cabriolet and Roadster models only. Please check Anti roll bar size before ordering Bush Size: 27mmWeight: 308

Name: Front Lower Control Arm Inner BushProduct Notes: PFF5-5402 Front Lower Control Arm Inner Bush is made from our Black 95A durometer polyurethane and paired with CNC-machined plated steel outer shells and stainless-steel sleeve, to distribute load better and reduce deflection by 25% while improving steering precision. Weight: 829Fitting Instructions

Name: Front Lower Control Arm Inner BushProduct Notes: PFF5-5402 Front Lower Control Arm Inner Bush is made from our Black 95A durometer polyurethane and paired with CNC-machined plated steel outer shells and stainless-steel sleeve, to distribute load better and reduce deflection by 25% while improving steering precision. Weight: 829Fitting Instructions

Name: Front Lower Control Arm Inner Bush Camber AdjustProduct Notes: PFF5-5402G Front Lower Control Arm Inner Bush Camber Adjust is essentially the same as PFF5-5402 but with the addition of a stainless-steel adjusting sleeve and spanner. This allows for 0.5 of camber adjustment to the front wheels, for improved front-end grip. Weight: 1012

Name: Front Lower Control Arm Inner Bush Camber AdjustProduct Notes: PFF5-5402G Front Lower Control Arm Inner Bush Camber Adjust is essentially the same as PFF5-5402 but with the addition of a stainless-steel adjusting sleeve and spanner. This allows for 0.5 of camber adjustment to the front wheels, for improved front-end grip. Weight: 1012

Name: Front Lower Wishbone Rear Bush (Concentric)Product Notes: Use PFF5-303 for the M3, or if increased caster is required. Weight: 287

Name: Front Lower Wishbone Rear Bush (Concentric)Product Notes: Use PFF5-303 for the M3, or if increased caster is required. Weight: 287Fitting Instructions

Name: Front Lower Wishbone Rear Bush (Concentric)Product Notes: Use PFF5-303 for the M3, or if increased caster is required. Weight: 287Fitting Instructions

Name: Front Lower Wishbone Rear Bush Caster OffsetProduct Notes: PFF5-303 has an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. For M3 (not Evo) or for non-M models. Weight: 397Fitting Instructions

Name: Front Lower Wishbone Rear Bush Caster OffsetProduct Notes: PFF5-303 has an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. For M3 (not Evo) or for non-M models. Weight: 397Fitting Instructions

Name: Front Lower Wishbone Rear Bush Caster OffsetProduct Notes: PFF5-303 has an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. For M3 (not Evo) or for non-M models. Weight: 397Fitting Instructions

Name: Front Radius Arm To Chassis BushProduct Notes: PFF5-401 Front Radius Arm to Chassis Bush uses our Black 95A material and is supplied with steel outer shells for better load distribution, offering improved durability and braking stability and a 140% increase over the worn rubber bush. Over the years we have seen a shift in the use of cars such as theBMW E92 M3 andE82 1M Coupe, with more of their time being spent on track and the power, chassis and braking modifications carried out, taking them from being quick road cars to very able and incredibly fast road-legal racers.Whilst creating this new part, we have revisited our existing non-adjustable partPFF5-401 Front Radius Arm to Chassis Bushso that it uses the same material, bush design and outer shell arrangement as above.This change in design increases stiffness by a further 25% over our previous offering for improved durability and braking stabilityand a 140% increase over the worn rubber bush. Weight: 1516Fitting Instructions

Name: Front Radius Arm To Chassis BushProduct Notes: PFF5-401 Front Radius Arm to Chassis Bush uses our Black 95A material and is supplied with steel outer shells for better load distribution, offering improved durability and braking stability and a 140% increase over the worn rubber bush. Over the years we have seen a shift in the use of cars such as theBMW E92 M3 andE82 1M Coupe, with more of their time being spent on track and the power, chassis and braking modifications carried out, taking them from being quick road cars to very able and incredibly fast road-legal racers.Whilst creating this new part, we have revisited our existing non-adjustable partPFF5-401 Front Radius Arm to Chassis Bushso that it uses the same material, bush design and outer shell arrangement as above.This change in design increases stiffness by a further 25% over our previous offering for improved durability and braking stabilityand a 140% increase over the worn rubber bush. Weight: 1516Fitting Instructions

Name: Front Radius Arm To Chassis BushProduct Notes: PFF5-5401BLKismade usingour Black 95A durometer material and supplied with outer shells to increase bush stiffness by 300%, controlling longitudinal wheel movement under braking and cornering, and improving longer-term durability. Using POWERFLEX PFF5-5401G provides a longer tyre life, increase handling of the car andbraking stability is also improved.The POWERFLEX PFF5-5401/5401G are 300% stiffer than the OEMbush Weight: 1403Fitting Instructions

Name: Front Radius Arm To Chassis BushProduct Notes: PFF5-5401 ismade usingour Black 95A durometer material and supplied with outer shells to increase bush stiffness by up to 300%, controlling longitudinal wheel movement under braking and cornering, and improving longer-term durability. Using POWERFLEX PFF5-5401G provides a longer tyre life, increase handling of the car andbraking stability is also improved.The POWERFLEX PFF5-5401/5401G are 300% stiffer than the OEMbush Weight: 1403Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjProduct Notes: PFF5-5401GBLK ismade usingour Black 95A durometer material and supplied with outer shells to increase bush stiffness by 300%, controlling longitudinal wheel movement under braking and cornering, and improving longer-term durability. It performs as the non-adjustable bushand allows for +/- 0.75 of caster adjustment, improving turn-in and steering feel, and correcting any steering pull. Combining our Polyurethane technologies with our in-house CNC machined stainless steel sleeve allows for easy on-car adjustmentsUsing POWERFLEX PFF5-5401G provides a longer tyre life, increase handling of the car andbraking stability is also improved.The POWERFLEX PFF5-5401/5401G are 300% stiffer than the OEMbush Weight: 1555Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjProduct Notes: PFF5-5401GBLK ismade usingour Black 95A durometer material and supplied with outer shells to increase bush stiffness by 300%, controlling longitudinal wheel movement under braking and cornering, and improving longer-term durability. It performs as the non-adjustable bushand allows for +/- 0.75 of caster adjustment, improving turn-in and steering feel, and correcting any steering pull. Combining our Polyurethane technologies with our in-house CNC machined stainless steel sleeve allows for easy on-car adjustmentsUsing POWERFLEX PFF5-5401G provides a longer tyre life, increase handling of the car andbraking stability is also improved.The POWERFLEX PFF5-5401/5401G are 300% stiffer than the OEMbush Weight: 1555Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjustProduct Notes: PFF5-401G Front Radius to Chassis Bush Caster Adjustable to provide up to +/- 0.75 degrees of on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry. Made in our stiffest Black 95A material and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combines all of the necessary ingredients to be perfectly suited to both road and track use. Over the years we have seen a shift in the use of cars such as theBMW E92 M3 andE82 1M Coupe, with more of their time being spent on track and the power, chassis and braking modifications carried out, taking them from being quick road cars to very able and incredibly fast road-legal racers.Made in our stiffest Black 95Amaterial and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combinesall of the necessary ingredients to be perfectly suited to both road and track use.PFF5-401G Front Radius to Chassis Bush Caster Adjustableto provide up to+/- 0.75 degreesof on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry.This change in design increases stiffness by a further 25% over our previous offering for improved durability and braking stabilityand a 140% increase over the worn rubber bush. Weight: 1629Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjustProduct Notes: PFF5-401G Front Radius to Chassis Bush Caster Adjustable to provide up to +/- 0.75 degrees of on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry. Made in our stiffest Black 95A material and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combines all of the necessary ingredients to be perfectly suited to both road and track use. Over the years we have seen a shift in the use of cars such as theBMW E92 M3 andE82 1M Coupe, with more of their time being spent on track and the power, chassis and braking modifications carried out, taking them from being quick road cars to very able and incredibly fast road-legal racers.Made in our stiffest Black 95Amaterial and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combinesall of the necessary ingredients to be perfectly suited to both road and track use.PFF5-401G Front Radius to Chassis Bush Caster Adjustableto provide up to+/- 0.75 degreesof on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry.This change in design increases stiffness by a further 25% over our previous offering for improved durability and braking stabilityand a 140% increase over the worn rubber bush. Weight: 1629Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mm Weight: 502 Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer)Product Notes: PFF5-3603BLK Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. PFF5-3603BLK uses a CNC-machined Aluminium outer shell to increase stiffness and durability further for the most demanding high-stress conditions. Weight: 596Fitting Instructions

Name: Front Wishbone Rear Bush (E46 Hybrid)Product Notes: PFF5-3601BLK Front Wishbone Rear Bush (E46 Hybrid) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner and outer bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. Weight: 386Fitting Instructions

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions