TT Models

Name: Front Strut Top Mount Bush WasherProduct Notes: PFF85-431W Front Strut Top Spacer (as normally supplied with PFF85-431 and now available separately) is a simple and cost-effective interim solution that fits and works with the OE Strut Top Cap to fill the gap and prevents binding up on the PU Spacer as the suspension turns. Fitting couldnt be easier either. Simply remove the existing Strut Top Cap from the car, separate the rubber ring from it, press the Cap into our Spacer and then refit it! NB; fitting this part is only recommended if the installed Top Mount is in good condition and there is a gap of at least 12mm between the top cap and body. If the OE mount has collapsed, you will need to replace the entire mount with PFF85-430 or PFF85-431. Bush Size: 18mmWeight: 112

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mm Camber AdjustableProduct Notes: This bush features a CNC-machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the smaller 30mm bush, please use part no. PFF85-201GBLK. CNC machined stainless steel sleeve with knurled end pattern to prevent unwanted rotation.Rotate to adjust camber. Bush Size: 45.5mm DiameterWeight: 639Fitting Instructions

Name: Front Wishbone (Cast) Front Bush 45mm Camber AdjustableProduct Notes: This bush features a CNC-machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the smaller 30mm bush, please use part no. PFF85-201G. CNC machined stainless steel sleeve with knurled end pattern to prevent unwanted rotation.Rotate to adjust camber. Bush Size: 45.5mm DiameterWeight: 639Fitting Instructions

Name: Front Wishbone (Cast) Rear BushProduct Notes: Fits the Cast Front Wishbone. Weight: 510Fitting Instructions

Name: Front Wishbone (Cast) Rear BushProduct Notes: Fits the Cast Front Wishbone. Weight: 510Fitting Instructions

Name: Front Wishbone (Cast) Rear BushProduct Notes: Fits the Cast Front Wishbone. Weight: 510Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Weight: 451

Name: Front Wishbone Front BushProduct Notes: For a camber adjustable bush use PFF85-501G. Weight: 451

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201G boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201GBLK boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Weight: 479Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Weight: 479Fitting Instructions

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G-5 is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1925Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G-5 is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1925Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

Name: Handling PackProduct Notes: This pack fits the following vehicles, fitted with OEM lower engine mount 5Q0 198 037 B:Audi TT Mk3 (after 06/2015)Audi A3 8V (after 06/2015) 1.8 or 2.0 FWDSeat Leon Mk3 (after 2016) 1.8 or 2.0 FWDIncluded within this pack are the following parts:PFF85-501Front Arm Front BushPFF3-902GFront Arm Rear Bush Caster AdjustablePFR85-816Rear Trailing Arm Mounting BushPFF85-832Lower Engine Mount InsertThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 2114

Name: Handling PackProduct Notes: This pack fits the following vehicles, fitted with OEM lower engine mount 5Q0 198 037 A:Audi TT Mk3 (up to 06/2015)Audi A3 8V (up to 06/2015)Audi A3 8V (after 06/2015) FWD up to 1.6 Petrol (Multilink Rear Suspension)Audi A3 8V (after 06/2015) AWD (except RS3)Seat Leon Mk3 (up to 2016)Seat Leon Mk3(after 2016) FWD up to 1.6 Petrol (Multilink Rear Suspension)Seat Leon Mk3(after 2016) AWDIncluded within this pack are the following parts:PFF85-501Front Arm Front BushPFF3-902GFront Arm Rear Bush Caster AdjustablePFR85-816Rear Trailing Arm Mounting BushPFF85-830Lower Engine Mount InsertThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 2114Fitting Instructions

Name: Jacking Point Insert Product Notes: PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time, again recommended for use in sets of 4 simultaneously. Fits the following vehicles:Audi A3/S3 Mk1 8L (1996-2003)Audi A3/S3/RS3 Mk2 8P (2003-2012)Audi A3/S3/RS3 Mk3 8V (2013-)Audi TT Mk1 8N (1999-2006) Audi TT/S/RS Mk2 8J (2007-2014) Audi TT Mk3 8S (2014 on) Audi Q2 (2017 on) Audi Q3 (2012 - 2018) Seat Toledo Mk2 1M (1999 - 2004) Seat Toledo Mk3 5P (2004-2009) Seat Alhambra Mk2 (2010 on) Seat Leon Mk1 TYP 1M (1999-2005) Seat Leon Mk2 1P (2005-2012) Seat Leon Mk3 5F (2013 on) Skoda Octavia Mk1 Typ 1U (1996-2004) Skoda Octavia Mk2 1Z (2004-2012) Skoda Octavia 5E (2012-2019) Skoda Yeti 5L (2009-2017) Skoda Superb B6 (2009-2011) Skoda Superb 3V (2015 on) Volkswagen New Beetle & Cabrio (1998-2011) Volkswagen Beetle A5 (2011 on) Volkswagen Bora (1999-2005) Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010) Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on) Volkswagen Golf Mk4 1J (1997-2004) Volkswagen Golf Mk5 1K (2004-2010) Volkswagen Golf Plus 5M (2004-2010) Volkswagen Golf Mk6 5K (2009-2012) Volkswagen Golf Mk7 5G (2012-2020) Volkswagen Jetta Mk5 1K (2005-2010) Volkswagen Jetta Mk6 A6 (2011 on) Volkswagen Passat B6 & B7 Typ3C (2006-2013) Volkswagen Passat CC 35 (2008-2012) Volkswagen Scirocco Mk3 (2008 - 2017) Volkswagen Sharan Mk2 (2010 on) Volkswagen Tiguan Mk1 (2007 - 2017) Volkswagen Touran (2003-2015) Volkswagen Touran (2017 on) Volkswagen CC (2012 - 2017) Volkswagen Eos (2006-2015) Weight: 105Fitting Instructions