Touran Models

Name: Lower Engine Mount Insert (Large) TrackProduct Notes: Made using our Purple 80A material, PFF85-704P is recommended for track driven and higher-tuned vehicles from mid-2008 on. For vehicles up to mid-2008 use PFF85-504.Being a stiffer material additional NVH may be experienced when fitting this part. Weight: 251Fitting Instructions

Name: Lower Engine Mount Insert (Large) Track UseProduct Notes: Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF85-830 insert, being a stiffer material additional noise and vibration may be felt. Weight: 240Fitting Instructions

Name: Lower Engine Mount Small Bush Product Notes: Weight: 178 Fitting Instructions

Name: Lower Engine Mount Small BushProduct Notes: Weight: 178Fitting Instructions

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 0

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 100

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325BLK Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Rear Anti Roll Bar Bush 19.6mmProduct Notes: Bush Size: 19.6mmWeight: 137

Name: Rear Anti Roll Bar Bush 20.5mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 20.5mmWeight: 124

Name: Rear Anti Roll Bar Bush 20.5mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 20.5mmWeight: 124

Name: Rear Anti Roll Bar Bush 20.7mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20.7mmWeight: 126

Name: Rear Anti Roll Bar Bush 20.7mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20.7mmWeight: 126

Name: Rear Anti Roll Bar Bush 21.7mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 21.7mmWeight: 125

Name: Rear Anti Roll Bar Bush 21.7mmProduct Notes: Bush Size: 21.7mmWeight: 137

Name: Rear Anti Roll Bar Bush 21.7mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 21.7mmWeight: 125

Name: Rear Lower Arm Inner Bush Product Notes: Weight: 663Fitting Instructions

Name: Rear Lower Arm Outer Bush Product Notes: Weight: 412

Name: Rear Lower Spring Mount Inner Product Notes: Weight: 359

Name: Rear Lower Spring Mount InnerProduct Notes: Weight: 359

Name: Rear Lower Spring Mount Outer Product Notes: This bush is suitable for Road and Black Series applications. It is the same part as the Black Series but with Road Series packaging. Fits into 1K0505311AB wishbone. Weight: 288

Name: Rear Lower Spring Mount Outer *Product Notes: Weight: 288

Name: Rear Lower Track Rod Inner BushProduct Notes: Weight: 542

Name: Rear Lower Track Rod Inner Bush Product Notes: Weight: 542

Name: Rear Lower Track Rod Outer Bush Product Notes: Weight: 495

Name: Rear Lower Track Rod Outer Bush Product Notes: Weight: 495

Name: Rear Tie Bar to Chassis Front BushProduct Notes: Weight: 762

Name: Rear Tie Bar to Chassis Front Bush Product Notes: Weight: 762