Tiguan Models

Name: Lower Engine Mount Insert (Large)Product Notes: Weight: 240Fitting Instructions

Name: Lower Engine Mount Insert (Large)Product Notes: Weight: 240Fitting Instructions

Name: Lower Engine Mount Insert (Large) DieselProduct Notes: Suitable for diesel models, using a softer material that helps reduce movement from the bush but transmits less noise and vibration over fitting the standard PFF85-830 insert. Weight: 240Fitting Instructions

Name: Lower Engine Mount Insert (Large) MotorsportProduct Notes: Made using our hardest Black 95A material, PFF85-704BLK fits vehicles from mid-2008 and is recommended for Competition use. For vehicles up to mid-2008 use PFF85-504BLK. Being a stiffer material additional NVH may be experienced when fitting this part. Weight: 251Fitting Instructions

Name: Lower Engine Mount Insert (Large) MotorsportProduct Notes: Made using our hardest Black 95A material, PFF85-504BLK fits vehicles up to mid-2008 and is recommended for Competition use. For vehicles from mid-2008 on use PFF85-704BLK. Being a stiffer material additional NVH may be experienced when fitting this part. Weight: 241Fitting Instructions

Name: Lower Engine Mount Insert (Large) Petrol/Tuned Diesel Product Notes: Made using our Yellow 70A material, PFF85-704 is recommended for standard/mildly tuned petrol vehicles and tuned diesel vehicles from mid-2008 on. For vehicles up to mid-2008 use PFF85-504. Weight: 251 Fitting Instructions

Name: Lower Engine Mount Insert (Large) Petrol/Tuned DieselProduct Notes: Made using our Yellow 70A material, PFF85-504 fits standard/mildly tuned petrol vehicles and tuned diesel vehicles up to mid-2008. For vehicles from mid-2008 on use PFF85-704. Weight: 241Fitting Instructions

Name: Lower Engine Mount Insert (Large) Std Diesel Product Notes: Made from our softest Red 65A material for less NVH, PFF85-504R fits standard diesel vehicles up to mid-2008. For vehicles from mid-2008 on use PFF85-704R. Weight: 241 Fitting Instructions

Name: Lower Engine Mount Insert (Large) Std DieselProduct Notes: Made from our softer Red 65A material for less NVH, PFF85-704R fits standard diesel vehicles from mid-2008 on. For vehicles up to mid-2008 on use PFF85-504R. Weight: 251Fitting Instructions

Name: Lower Engine Mount Insert (Large) TrackProduct Notes: Made from our Purple 80A material, PFF85-504P fits vehicles up to mid-2008 and is recommended for track use or heavily modified vehicles. For vehicles from mid-2008 on use PFF85-704P. Being a stiffer material additional NVH may be experienced when fitting this part. Weight: 241Fitting Instructions

Name: Lower Engine Mount Insert (Large) TrackProduct Notes: Made using our Purple 80A material, PFF85-704P is recommended for track driven and higher-tuned vehicles from mid-2008 on. For vehicles up to mid-2008 use PFF85-504.Being a stiffer material additional NVH may be experienced when fitting this part. Weight: 251Fitting Instructions

Name: Lower Engine Mount Insert (Large) Track UseProduct Notes: Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF85-830 insert, being a stiffer material additional noise and vibration may be felt. Weight: 240Fitting Instructions

Name: Lower Engine Mount Small Bush Product Notes: PFF3-905 Lower Engine Mount Small Bush is a replacement for the often softened and perished, rubber bush in the original 'dog bone' shaped bracket, helping to restrict engine movement and improve gear changes.Fits 42mm diameter, for bushes with a 38.5mm diameter please use PFF85-505. Bush Size: 42mmWeight: 199Fitting Instructions

Name: Lower Engine Mount Small Bush Product Notes: PFF3-905 Lower Engine Mount Small Bush is a replacement for the often softened and perished, rubber bush in the original 'dog bone' shaped bracket, helping to restrict engine movement and improve gear changes.Fits 42mm diameter, for bushes with a 38.5mm diameter please use PFF85-505. Bush Size: 42mmWeight: 199Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 0

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 100

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325BLK Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Rear Anti Roll Bar Bush 20.5mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 20.5mmWeight: 124

Name: Rear Anti Roll Bar Bush 20.5mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 20.5mmWeight: 124

Name: Rear Anti Roll Bar Bush 20.7mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20.7mmWeight: 126

Name: Rear Anti Roll Bar Bush 20.7mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20.7mmWeight: 126

Name: Rear Anti Roll Bar Bush 21.7mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 21.7mmWeight: 125

Name: Rear Anti Roll Bar Bush 21.7mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 21.7mmWeight: 125

Name: Rear Anti Roll Bar Bush 21.7mmProduct Notes: Bush Size: 21.7mmWeight: 137

Name: Rear Anti Roll Bar Bush 21.7mmProduct Notes: Bush Size: 21.7mmWeight: 137

Name: Rear Lower Arm Inner Bush Product Notes: Weight: 663Fitting Instructions