Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Powerflex

Powerflex - Road Series

 

Der det skal være flere en 1 stk på bilen så er disse priset pr stk så her må en legge i handle vogn det antallet bilen trenger.  Send oss gjerne en mail info@koolart.no 

Hjulopphengsbøssinger er noen av de mest belastede komponentene som er montert på en bil. De utsettes for enorme belastninger og under de mest krevende forhold uten vedlikehold eller smøring.

Materialet de er produsert av er en gummiblanding som inneholder naturlige produkter som forringes med alderen. 
Den blir mykere og mer smidig, og motstår kreftene som utsettes for den mindre og mindre. Dermed tillater den mer og mer bevegelse av fjæringskomponenter og gir mindre og mindre kontroll over fjæringsgeometrien.

Dette fører igjen til akselerert dekkslitasje, ustabilitet i bremser og dårlig håndtering. Dette er den største grunnen til at du umiddelbart kan se forskjellen når du kjører en tre år gammel bil sammenlignet med en ny bil fra utstillingslokalet. 
Imidlertid vil selv nye biler dra nytte av POWERFLEX-bøssinger på grunn av den overlegne designen. 
De gir mye mer effektiv kontroll over fjæringskomponentene i mye større grad enn vanlige gummideler.

Med de teknologiske fremskrittene i dette materialet har det vært mulig å overvinne det vanlige problemet forbundet med hardere bøssinger, som er økt støy. 
Ved riktig konstruering av polyuretanblandingen kan bøssinger gjøres 25–30 % stivere enn nye gummideler, men med nøyaktig de samme støydempende egenskapene.

POWERFLEX-bøssinger gir mening.POWERFLEX for forbedret ytelse.POWERFLEX for økt sikkerhet.POWERFLEX for lengre dekklevetid.
Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: PFF2-102 Front Wishbone Rear Bushuses our Purple 80A durometer material and comes supplied with hard anodised CNC-machined inner sleeves and outer shells for better load distributionand uncompromised articulation, matching the stiffness of the OEbush to restore the dynamic factory spec geometry. Weight: 849Fitting Instructions

1450.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: PFF2-102BLKFront Wishbone Rear Bushhas the same design as the Road Series part, but uses our Black Series 95A material, increasing stiffness by30% for those looking to use their vehicle on track. Weight: 849Fitting Instructions

1450.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 656Fitting Instructions

770.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 656Fitting Instructions

710.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

710.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

770.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

710.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: Fits C5 models with non-active (non-VH10) MacPherson suspension found in Asian markets.Fits 508 RXH Hybrid 4X4 models.Our bush allows free rotation, avoiding torsional twist in the material which is the main cause of failure for the OE rubber bush.PFF12-502 boosts stiffness over the original rubber bush by almost 50%for improved suspension performance and increased longevity. Weight: 1044Fitting Instructions

660.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: PFF19-1202 will not fit models using aluminium front wishbones. Weight: 694Fitting Instructions

740.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear Bush Product Notes: PFF19-1202 will not fit models using aluminium front wishbones. Weight: 694Fitting Instructions

820.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: This bush is suitable for Road and Black Series applications and require the re-use of the original outer shells. Weight: 235Fitting Instructions

460.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: This bush is suitable for Road and Black Series applications and require the re-use of the original outer shells. Weight: 235Fitting Instructions

470.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: This part fits vehicles with a hydraulic rear bush diameter of 60.05mm. For vehicles fitted with a rear bush diameter of 72.05mm, please use PFF85-1602. Bush Size: 60.05mmWeight: 903Fitting Instructions

610.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear Bush Product Notes: This part fits vehicles with a rear bush diameter of 72.05mm. For vehicles fitted with a rear bush diameter of 60.05mm, please use PFF85-1702. PFF85-1602 is almost 50% stiffer than the original rubber bush for increased stability and geometry control. Bush Size: 72.05mmWeight: 1079Fitting Instructions

690.-

Front Lower Wishbone Rear Bush

Name: Front Lower Wishbone Rear BushProduct Notes: Includes special stainless steel sleeve for weld spot on wishbones. Weight: 331Fitting Instructions

710.-

Viser 1793 til 1824 (av 5504 produkter)

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Oppgrader bilen med kvalitetsforinger fra Powerflex – utviklet for deg som ønsker bedre respons, mer stabilitet og lengre holdbarhet enn originale gummiforinger. Powerflex polyuretanforinger gir redusert fleks i understell og oppheng, noe som forbedrer både styringsfølelse, veigrep og kjøreegenskaper.

Powerflex er kjent for høy kvalitet og produserer foringer til en rekke bilmodeller, både for gatebruk, sportslig kjøring og bane. Polyuretanmaterialet er betydelig mer slitesterkt enn tradisjonelle gummiforinger og tåler belastning, olje, salt og vær langt bedre.

Fordeler med Powerflex foringer:

  • Bedre stabilitet og styrerespons
  • Redusert slark i understell og oppheng
  • Lengre levetid enn originale gummiforinger
  • Mer presis og sportslig kjørefølelse
  • Motstandsdyktig mot slitasje og deformasjon
  • Enkel montering på mange modeller

Slitte originale foringer kan føre til dårligere kjøreegenskaper, unormal dekkslitasje og ustabil bil. Ved å montere Powerflex foringer får bilen et fastere og mer presist understell som gir bedre kontroll både på landevei og ved aktiv kjøring.

Vi tilbyr Powerflex foringer til en rekke bilmerker og modeller – blant annet bærearmsforinger, stabilisatorforinger, motorfester og komplette foringssett. Enten du bygger showbil, senket bil eller ønsker å forbedre originalfølelsen, er Powerflex et populært valg blant entusiaster og verksteder verden over.

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png