Octavia

Name: Front Anti Roll Bar Mount 23mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 23mmWeight: 59

Name: Front Anti Roll Bar Mount 23mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 23mmWeight: 59

Name: Front Anti Roll Bar Mount 23mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 23mmWeight: 59

Name: Front Engine Mount Dog Bone (Diesel)Product Notes: Made in our softer Grey 65A material, PFF85-420R is intended for standard diesel vehicles. For petrol or modified diesel vehicles, please use PFF85-420. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Diesel)Product Notes: Made in our softer Red 65A material, PFF85-420R is intended for standard diesel vehicles. For petrol or modified diesel vehicles, please use PFF85-420. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Motorsport)Product Notes: Made in our hardest Black 95A material, this product is best suited to Track / Motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Petrol/Tuned Diesel)Product Notes: Made in our Grey 70A material, PFF85-420 is intended for petrol or tuned diesel vehicles. For significantly tuned petrol or diesel vehicles, or those being used on track, please use PFF85-420BLK. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated part PFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Petrol/Tuned Diesel)Product Notes: Made in our Yellow 70A material, PFF85-420 is intended for petrol or tuned diesel vehicles. For significantly tuned petrol or diesel vehicles, or those being used on track, please use PFF85-420BLK. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated part PFF85-505 Weight: 239

Name: Front Lower Engine Mount Hybrid Bush (Large) - Fast Road/TrackProduct Notes: PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . Weight: 493Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Fast Road/TrackProduct Notes: PFF85-831P replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. This part is made in our Purple Shore A 80 for vehicles running increased power or that see occasional track use. Weight: 519Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - RoadProduct Notes: PFF85-831 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. Weight: 519Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - RoadProduct Notes: PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . Weight: 493Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Track/MSport Product Notes: PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. Weight: 493Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Track/MSportProduct Notes: PFF85-831 replaces the lower half of the original bush OEM part number 5Q0 198 037 / 5Q0 198 037 A and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fitted without subframe removal from the vehicle and avoids associated wheel alignment costs. Weight: 519Fitting Instructions

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430H. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430BLK. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush WasherProduct Notes: PFF85-431W Front Strut Top Spacer (as normally supplied with PFF85-431 and now available separately) is a simple and cost-effective interim solution that fits and works with the OE Strut Top Cap to fill the gap and prevents binding up on the PU Spacer as the suspension turns. Fitting couldnt be easier either. Simply remove the existing Strut Top Cap from the car, separate the rubber ring from it, press the Cap into our Spacer and then refit it! NB; fitting this part is only recommended if the installed Top Mount is in good condition and there is a gap of at least 12mm between the top cap and body. If the OE mount has collapsed, you will need to replace the entire mount with PFF85-430 or PFF85-431. Bush Size: 18mmWeight: 112

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Weight: 451

Name: Front Wishbone Front BushProduct Notes: For a camber adjustable bush use PFF85-501G. Weight: 451

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201G boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201GBLK boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions