Mondeo Models

Name: Front Wishbone Rear Bush 46.5mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46.5mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47.4mm diameter. Please note these bushes will not fit the ST24 or ST200 models. Bush Size: 46.5mmWeight: 539Fitting Instructions

Name: Front Wishbone Rear Bush 47mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Please note these bushes will not fit the ST24 or ST200 models. Bush Size: 47mmWeight: 569Fitting Instructions

Name: Front Wishbone Rear Bush 47mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Please note these bushes will not fit the ST24 or ST200 models. Bush Size: 47mmWeight: 569Fitting Instructions

Name: Front Wishbone Rear Bush 47mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Please note these bushes will not fit the ST24 or ST200 models. Bush Size: 47mmWeight: 569Fitting Instructions

Name: Front Wishbone Rear Bush 54mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Bush Size: 54mmWeight: 709Fitting Instructions

Name: Front Wishbone Rear Bush 54mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Bush Size: 54mmWeight: 709Fitting Instructions

Name: Front Wishbone Rear Bush 60mmProduct Notes: Ford have changed the diameter of the bushes used in the front wishbones several times. Please measure the original bushes to select the correct bushes. PFF19-601 is 46mm diameter. PFF19-602 is 54mm diameter. PFF19-901 is 47mm diameter. PFF19-902 is 60mm diameter. Bush Size: 60mmWeight: 856Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 215

Name: Lower Engine Mount InsertProduct Notes: This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 215

Name: Lower Engine Mount InsertProduct Notes: PFF88-1130BLK Lower Engine Mount Insert is made using our Black 95A durometer material and designed to fill the voiding of the original lower engine mount. By doing so, it stiffens the rubber mount reducing engine/trans movement during acceleration and smooths out gearshifts for an improved driving experience. Fits Volvo S60, V70, S80, XC60, XC70 with B6* 3.0/3.2 6Cyl engines, Ford Mondeo MK4 ST, S-Max ST with the 2.5 Duratec engine, Land Rover Discovery Sport 1 and Freelander 2 with 2.0L Turbo Petrol engines and Range Rover Evoque L538 2.0L Turbo Petrol models and 2.2L Diesel manual models. Increased NVH will be experienced by fitting this part. Weight: 99Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: PFF88-1130 Lower Engine Mount Insert is made using our Yellow 70A durometer material and designed to fill the voiding of the original lower engine mount. By doing so, it stiffens the rubber mount reducing engine/trans movement during acceleration and smooths out gearshifts for an improved driving experience. Fits Volvo S60, V70, S80, XC60, XC70 with B6* 3.0/3.2 6Cyl engines, Ford Mondeo MK4 ST, S-Max ST with the 2.5 Duratec engine, Land Rover Discovery Sport 1 and Freelander 2 with 2.0L Turbo Petrol engines and Range Rover Evoque L538 2.0L Turbo Petrol models and 2.2L Diesel manual models. Weight: 99Fitting Instructions

Name: Rear Anti Roll Bar BushProduct Notes: Fits Estate models only Bush Size: 20mmWeight: 180

Name: Rear Anti Roll Bar BushProduct Notes: Fits Estate models only Bush Size: 20mmWeight: 180

Name: Rear Anti Roll Bar Bush 16mmProduct Notes: Bush Size: 16mmWeight: 64

Name: Rear Anti Roll Bar Bush 16mmProduct Notes: Please check anti roll bar size before ordering Bush Size: 16mmWeight: 64

Name: Rear Anti Roll Bar Bush 16mmProduct Notes: Bush Size: 16mmWeight: 64

Name: Rear Anti Roll Bar Bush 22mmProduct Notes: This bush fits saloon and hatch models only NOT ESTATE VERSIONS. Use either PFR19-905-* or PFR19-1316-* Bush Size: 22mmWeight: 89

Name: Rear Anti Roll Bar Bush 22mmProduct Notes: This bush fits saloon and hatch models only NOT ESTATE VERSIONS. Use either PFR19-905-* or PFR19-1316-* Bush Size: 22mmWeight: 89

Name: Rear Anti Roll Bar To Link Rod Bush Product Notes: Weight: 87Fitting Instructions

Name: Rear Anti Roll Bar To Link Rod Bush Product Notes: Weight: 87Fitting Instructions

Name: Rear Anti-Roll Bar BushProduct Notes: Does not fit Mondeo 2.5, 2.3, or Diesel models. Please check the anti-roll bar diameter size for correct product sizing. Bush Size: 20.3mmWeight: 158

Name: Rear Anti-Roll Bar BushProduct Notes: Fits Mondeo 2.5, 2.3, or Diesel models. Please check the anti-roll bar diameter size for correct product sizing. Bush Size: 21.3Weight: 158

Name: Rear Anti-Roll Bar BushProduct Notes: Fits Mondeo 2.5, 2.3, or Diesel models. Please check the anti-roll bar diameter size for correct product sizing. Bush Size: 21.3mmWeight: 158

Name: Rear Anti-Roll Bar BushProduct Notes: Does not fit Mondeo 2.5, 2.3, or diesel models. Please check the anti-roll bar diameter size for correct product sizing. Bush Size: 20.3mmWeight: 158

Name: Rear Anti-Roll Bar Mounting Bush 18mmProduct Notes: Bush Size: 18mmWeight: 53

Name: Rear Anti-Roll Bar Mounting Bush 18mmProduct Notes: Bush Size: 18mmWeight: 53

Name: Rear Anti-Roll Bar Mounting Bush 18mmProduct Notes: Bush Size: 18mmWeight: 53

Name: Rear Lower Arm Inner BushProduct Notes: Fits pressed steel lower arms, for cast aluminium arms please use PFR88-1913. Weight: 590Fitting Instructions

Name: Rear Lower Arm Inner BushProduct Notes: Fits pressed steel lower arms, for cast aluminium arms please use PFR88-1913. Weight: 590Fitting Instructions

Name: Rear Lower Arm Outer BushProduct Notes: Fits pressed steel lower arms, for cast aluminium arms please use PFR88-1914. Weight: 568Fitting Instructions

Name: Rear Lower Arm Outer BushProduct Notes: Fits pressed steel lower arms, for cast aluminium arms please use PFR88-1914. Weight: 568Fitting Instructions

Name: Rear Subframe BushProduct Notes: Weight: 2179Fitting Instructions