Mitsubishi

Name: Front Upper Wishbone BushProduct Notes: Weight: 951Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: This bush uses a 12mm bolt. For a 14mm bolt, use PFF44-1011-14. Weight: 303

Name: Front Wishbone Front Bush Product Notes: Weight: 254

Name: Front Wishbone Front BushProduct Notes: This bush uses a 12mm bolt. For a 14mm bolt, use PFF44-1011-14BLK. Weight: 303

Name: Front Wishbone Front Bush Product Notes: Weight: 254

Name: Front Wishbone Front BushProduct Notes: Check bolt size. This bush uses a 14mm Bolt. For 12mm bolt use PFF44-101BLK. Weight: 304

Name: Front Wishbone Front BushProduct Notes: Check bolt size. This bush uses a 14mm Bolt. For 12mm bolt use PFF44-101. Weight: 304

Name: Front Wishbone Rear BushProduct Notes: Does not fit the EVO 7 Weight: 541

Name: Front Wishbone Rear Bush Product Notes: Weight: 873Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Weight: 873Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Does not fit the EVO 7 Weight: 541

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: This part provides +/- 0.33 degrees of on-car caster adjustment combined with an additional 6mm anti-lift offset. This bush is designed for use on standard travel suspension. Suitable for Road and Black Series applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1147Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: This part provides +/- 0.33 degrees of on-car caster adjustment combined with an additional 6mm anti-lift offset. This bush is designed for use on standard travel suspension. Suitable for Road and Black Series applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment.Weight: 1147Fitting Instructions

Name: Lower Engine Mount Large Bush Product Notes: PFF44-520 is suitable for petrol engined road models. For track/tuned models use PFF44-520P. This is a complete bush to fit into the original mount. For an insert only please use PFF44-521. Weight: 310Fitting Instructions

Name: Lower Engine Mount Large Bush Product Notes: This is a complete bush to fit into the original mount. For an insert only please use PFF44-521BLK. Weight: 310Fitting Instructions

Name: Lower Engine Mount Large Bush (Track Use)Product Notes: PFF44-520P is suitable for track car/tuned models, it is a stiffer bush and may give more vibration This is a complete bush to fit into the original mount. For an insert only please use PFF44-521. Please note these are an upgrade, some additional vibration may be felt. Weight: 310Fitting Instructions

Name: Lower Engine Mount Large Bush Insert Product Notes: This is an insert that fits into the voids in the original bush. For a complete bush please use PFF44-520BLK. Not recommended for 3 cylinder engines. Weight: 86

Name: Lower Engine Mount Large Bush Insert Product Notes: This is an insert that fits into the voids in the original bush. For a complete bush please use PFF44-520. Not recommended for 3 cylinder engines. Weight: 86

Name: Lower Engine Mount Small Bush Product Notes: Weight: 157

Name: Lower Engine Mount Small Bush Product Notes: Weight: 157

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Camber Bolt Kit (14mm) Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts? Bush Size: M14 x 70mm Weight: 261 Fitting Instructions

Name: PowerAlign Camber Bolt Kit (16mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your toolkit so that you can make pit garage adjustments to your suspension using PowerAlignCamber Bolts? Bush Size: M16 x 75mmWeight: 356Fitting Instructions

Name: Rear Anti Roll Bar Bush 22mmProduct Notes: Bush Size: 22mmWeight: 83

Name: Rear Anti Roll Bar Bush 22mmProduct Notes: Bush Size: 22mmWeight: 83

Name: Rear Anti Roll Bar Bush 24mmProduct Notes: Bush Size: 24mmWeight: 85

Name: Rear Anti Roll Bar Bush 24mmProduct Notes: Bush Size: 24mmWeight: 85

Name: Rear Anti Roll Bar Bush 27mmProduct Notes: Bush Size: 27mmWeight: 79

Name: Rear Anti Roll Bar Bush 27mmProduct Notes: Bush Size: 27mmWeight: 79

Name: Rear Anti Roll Bar Mounting 18mmProduct Notes: Fits EVO 6 RS Bush Size: 18mmWeight: 78

Name: Rear Anti Roll Bar Mounting 18mmProduct Notes: Fits EVO 6 RS Bush Size: 18mmWeight: 78

Name: Rear Anti Roll Bar Mounting 21mmProduct Notes: Bush Size: 21mmWeight: 66