Jetta MK3 A3 (1992 - 1998)

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201GBLK boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201G boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234. Bush Size: 15mm wide bracketWeight: 83

Name: Power Steering Rack Mount Product Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 49.5mm to suit LHD ZF power steering racks. For 44mm diameter steering racks and a 18.5mm wide bracket use PFF85-232. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233. Bush Size: 49.5mmWeight: 66

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234. Bush Size: 15mm wide bracketWeight: 83

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234. Bush Size: 15mm wide bracketWeight: 83

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234 Bush Size: 18.5mm wide bracketWeight: 99

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm Bush Size: 18.5mm wide bracketWeight: 99

Name: Power Steering Rack MountProduct Notes: This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234 Bush Size: 18.5mm wide bracketWeight: 99

Name: Power Steering Rack Mount Product Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 49.5mm to suit LHD ZF power steering racks. For 44mm diameter steering racks and a 18.5mm wide bracket use PFF85-232 For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 Bush Size: 49.5mmWeight: 66

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Rear Beam Mounting BushProduct Notes: Suitable for all Golf MK3 2WD models except Variant (Estate). Fits all VW Vento (1992-1998) and Corrado VR6 models (1989-1995). For non-VR6 Corrado, please use PFR85-207. Weight: 1070Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Suitable for all Golf MK3 2WD models except Variant (Estate). Fits all VW Vento (1992-1998) and Corrado VR6 models (1989-1995). For non-VR6 Corrado, please use PFR85-207. Weight: 1070Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Suitable for all Golf MK3 2WD models except Variant (Estate). Fits all VW Vento (1992-1998) and Corrado VR6 models (1989-1995). For non-VR6 Corrado, please use PFR85-207. Weight: 1070Fitting Instructions

Name: Rear Bump StopProduct Notes: BS008 fits the rear of the following vehicles Volkswagen Corrado (1989 - 1995) Volkswagen Golf Mk 3 (1992-1998) Volkswagen Golf Mk2 (1985-1992) Volkswagen Jetta (1985 - 1992) Volkswagen Vento (1992 - 1998) Bush Size: 60mm x 58mm x 10.5mmWeight: 197Fitting Instructions

Name: Rear Shock Top Mounting BushProduct Notes: Weight: 290Fitting Instructions

Name: Rear Shock Top Mounting BushProduct Notes: Weight: 290Fitting Instructions

Name: Rear Shock Top Mounting BushProduct Notes: Weight: 290Fitting Instructions