Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Golf

Front Wishbone Front Bush 30mm

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

500.-

Front Wishbone Front Bush 30mm

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK. Bush Size: 30mmWeight: 263

550.-

Front Wishbone Front Bush 30mm

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

500.-

Front Wishbone Front Bush 30mm Camber Adjustable

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201GBLK boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

820.-

Front Wishbone Front Bush 30mm Camber Adjustable

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201G boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

820.-

Front Wishbone Front Bush Camber Adjustable

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

1020.-

Front Wishbone Front Bush Camber Adjustable

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

1020.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902GBLK. Bush Size: 65mmWeight: 1059Fitting Instructions

1020.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Made in our Black 95A material with a tapered bore to reduce stress during articulation, this bush fits vehicles with the combination of an aluminium subframe (OE Part No. 5Q0199369, 5WA199369A and 3Q0199369E) and pressed-steel wishbones only. For vehicles with a steel subframe, please use PFF85-802. For vehicles requiring further on-car caster adjustment, please use PFF3-902G. Weight: 1219

950.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

730.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

800.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

730.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

590.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PABLK and for cast arms use PFF3-610BLK. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

650.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

590.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G. Bush Size: 65mmWeight: 1059Fitting Instructions

930.-

Front Wishbone Rear Bush (Track/Race)

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

1540.-

Front Wishbone Rear Bush (Track/Race)

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

1540.-

Front Wishbone Rear Bush Anti-Lift & Caster Offset

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1900Fitting Instructions

1640.-

Front Wishbone Rear Bush Anti-Lift & Caster Offset

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1798Fitting Instructions

1810.-

Front Wishbone Rear Bush, Caster Adjustable

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

1510.-

Viser 129 til 160 (av 419 produkter)

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png