Golf MK7 5G (2012 - 2019)

Name: Lower Engine Mount Insert (Large)Product Notes: Weight: 240Fitting Instructions

Name: Lower Engine Mount Insert (Large) DieselProduct Notes: Suitable for diesel models, using a softer material that helps reduce movement from the bush but transmits less noise and vibration over fitting the standard PFF85-830 insert. Weight: 240Fitting Instructions

Name: Lower Engine Mount Insert (Large) Track UseProduct Notes: Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF85-830 insert, being a stiffer material additional noise and vibration may be felt. Weight: 240Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 0

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 100

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325BLK Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Powerflex Handling Pack (2012 -)Product Notes: This kit is suitable for 2WD Multi-link and 4WD vehicles only and is recommended for petrol models only. PFF85-832 Lower Engine Mount Insert fits OEM part number 5Q0198037B. Included within this pack are the following parts: PFF85-501Front Wishbone Front BushPFF85-802Front Wishbone Rear BushPFR85-816Rear Trailing Arm BushPFF85-832Lower Engine Mount Insert (Large) This Handling Pack contains a selection of parts from a complete vehicle listing, click hereto see more parts available. Please see layouts below for other bushes available for the same vehicle. Weight: 2114Fitting Instructions

Name: Powerflex Handling Pack (2012 -)Product Notes: This kit is suitable for Petrol 2WD Multi-link and 4WD vehicles only. PFF85-830 fits Lower Engine Mount Insert fits OEM part number 5Q0198037. Included within this pack are the following parts: PFF85-501Front Wishbone Front BushPFF85-802Front Wishbone Rear BushPFR85-816Rear Trailing Arm BushPFF85-830Lower Engine Mount Insert (Large) This Handling Pack contains a selection of parts from a complete vehicle listing, click hereto see more parts available.Please see the layouts below for other bushes available for the same vehicle. Weight: 2114Fitting Instructions

Name: Rear Anti Roll Bar Bush 18.5mmProduct Notes: Bush Size: 18.5mmWeight: 137

Name: Rear Anti Roll Bar Bush 18.5mmProduct Notes: Bush Size: 18.5mmWeight: 137

Name: Rear Anti Roll Bar Bush 19.6mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 19.6mmWeight: 128

Name: Rear Anti Roll Bar Bush 19.6mmProduct Notes: Bush Size: 19.6mmWeight: 137

Name: Rear Anti Roll Bar Bush 19.6mmProduct Notes: Bush Size: 19.6mmWeight: 137

Name: Rear Anti Roll Bar Bush 19.6mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 19.6mmWeight: 128

Name: Rear Anti Roll Bar Bush 20.7mmProduct Notes: Bush Size: 20.7mmWeight: 137

Name: Rear Anti Roll Bar Bush 20.7mmProduct Notes: Bush Size: 20.7mmWeight: 137

Name: Rear Anti Roll Bar Bush 21.7mmProduct Notes: Bush Size: 21.7mmWeight: 137

Name: Rear Anti Roll Bar Bush 21.7mmProduct Notes: Bush Size: 21.7mmWeight: 137

Name: Rear Beam Mounting BushProduct Notes: Weight: 1133Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 1133Fitting Instructions

Name: Rear Diff Front Mounting Bush Product Notes: This bush fits 4 wheel drive models only where the differential casing front mount measures 35mm in width. The 35mm differential casing mount is found on AWD MQB platform and 2015-on PQ35 platform vehicles. The OEM rubber front mount must be part number 1K0 599 437 for this bush to replace. If in doubt, measure the height of the casing front mount before ordering. If the mount is 30mm in height or the OEM part number on your vehicle is 1K0 599 431 then use PFR85-523. Bush Size: 35mmWeight: 535Fitting Instructions

Name: Rear Diff Front Mounting BushProduct Notes: This bush fits models only where the bush location in the diff casing measures 35mm tall as found on AWD MQB platform and 2015-on PQ35 platform vehicles. If in doubt, measure the height of the front casing mount before ordering. If the mount is 30mm in height or the OEM part number on your vehicle is 1K0 599 431, please use PFR85-523. Bush Size: 35mmWeight: 535Fitting Instructions

Name: Rear Diff Rear Mounting BushProduct Notes: Fits 4WD models only. Weight: 970Fitting Instructions

Name: Rear Diff Rear Mounting Bush Product Notes: This bush fits 4 wheel drive models only. Weight: 970Fitting Instructions