Defender

Name: Panhard Rod Bush 30mmProduct Notes: This part fits vehicles up to VIN 2A626645. For later vehicles please use PFF32-301. Bush Size: 30mm ODWeight: 163

Name: Panhard Rod Bush 35mmProduct Notes: Fits the Defender from VIN 2A626646 and Post-95 Range Rover P38 only. Bush Size: 35mm ODWeight: 207

Name: Panhard Rod Bush 35mmProduct Notes: Fits the Defender from VIN 2A626646 and Post-95 Range Rover P38 only. Bush Size: 35mm ODWeight: 207

Name: Powerflex Handling Pack Product Notes: Included within this pack are the following parts:PFF32-301Panhard Rod Bush 35mmPFF32-108Front Radius Arm Front BushPFF32-109Front Radius Arm Rear BushPFR32-110A Frame to Chassis BushPFR32-111Rear Radius Arm Front BushPFR32-112Rear Radius Arm Rear BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 4010

Name: Powerflex Handling Pack Product Notes: Included within this pack are the following parts:PFF32-101Panhard Rod Bush 30mmPFF32-107Front Radius Arm Front BushPFF32-109Front Radius Arm Rear BushPFR32-110A-Frame to Chassis BushPFR32-111Rear Radius Arm Front BushPFR32-112Rear Radius Arm Rear BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 4010

Name: Powerflex Handling Pack Product Notes: Included within this pack are the following parts:PFF32-101Panhard Rod Bush 30mmPFF32-108Front Radius Arm Front BushPFF32-109Front Radius Arm Rear BushPFR32-110A-Frame to Chassis BushPFR32-111Rear Radius Arm Front BushPFR32-112Rear Trailing Arm to Axle BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 4010

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90, 110, 120, except 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 271

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90, 110, 120, except 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 271

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 100

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 100

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 110 and 130 models. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 323

Name: Rear Anti Roll Bar Bush 28mmProduct Notes: Fits 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 28mmWeight: 100

Name: Rear Anti Roll Bar Bush 28mmProduct Notes: Fits 110 and 130 models. Please check anti roll bar diameter before ordering. Bush Size: 28mmWeight: 320

Name: Rear Bump Stop Lowered - 40mmProduct Notes: This part is designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively. Bush Size: 40mm TallWeight: 979

Name: Rear Radius Arm Front Bush Product Notes: During testing of the original rubber bushes, it was discovered that the resting position of the vehicle forces the bush into a stressed angle that leads to premature failure and uneven spring rate characteristics through the suspension travel.PFR32-111 has been engineered to align the radius arm with a 3.5 degrees static angle of the radius arm to allow neutral articulation for improved performance and longevity.Weight: 2082Fitting Instructions

Name: Rear Radius Arm Front BushProduct Notes: During testing of the original rubber bushes, it was discovered that the resting position of the vehicle forces the bush into a stressed angle that leads to premature failure and uneven spring rate characteristics through the suspension travel.PFR32-111 has been engineered to align the radius arm with a 3.5 degrees static angle of the radius arm to allow neutral articulation for improved performance and longevity. Weight: 2082Fitting Instructions

Name: Rear Shock Absorber Upper BushProduct Notes: PFR32-133 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes. Weight: 276

Name: Rear Shock Absorber Upper BushProduct Notes: PFR32-133 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes. Weight: 276

Name: Rear Trailing Arm to Axle BushProduct Notes: Weight: 287

Name: Rear Trailing Arm to Axle BushProduct Notes: PFR32-112 uses our Black 95A material which helps to increase the stiffness of the original parts by 25%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere. Weight: 287

Name: Shock Absorber BushProduct Notes: Each carton contains 2 X bushes made up of 4 X PU parts. Early Defender models use 4 X bushes on the front and 2 X bushes at the rear. Defender models from 02 onwards use 4 X front bushes only. PF32-132 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes.Weight: 68

Name: Shock Absorber BushProduct Notes: Each carton contains 2 X bushes made up of 4 X PU parts. Early Defender models use 4 X bushes on the front and 2 X bushes at the rear. Defender models from 02 onwards use 4 X front bushes only. PF32-132 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes.Weight: 68

Name: Shock Absorber Lower Bush Product Notes: PFR32-134 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A materialWeight: 100

Name: Shock Absorber Lower Bush Product Notes: Weight: 100

Name: Steering Damper Bush - Eye End Product Notes: Weight: 42

Name: Steering Damper Bush - Eye End Product Notes: Weight: 42

Name: Steering Damper Bush - Pin End Product Notes: This part fits the pin end of the steering damper and boosts the stiffness of the original bush by almost 300% for increased performance and longevity. For the eye end please use PFF32-135. Weight: 52

Name: Steering Damper Bush - Pin End Product Notes: This part fits the pin end of the steering damper and boosts the stiffness of the original bush by almost 300% for increased performance and longevity. For the eye end please use PFF32-135. Weight: 52