Audi

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430H. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430BLK. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush WasherProduct Notes: PFF85-431W Front Strut Top Spacer (as normally supplied with PFF85-431 and now available separately) is a simple and cost-effective interim solution that fits and works with the OE Strut Top Cap to fill the gap and prevents binding up on the PU Spacer as the suspension turns. Fitting couldnt be easier either. Simply remove the existing Strut Top Cap from the car, separate the rubber ring from it, press the Cap into our Spacer and then refit it! NB; fitting this part is only recommended if the installed Top Mount is in good condition and there is a gap of at least 12mm between the top cap and body. If the OE mount has collapsed, you will need to replace the entire mount with PFF85-430 or PFF85-431. Bush Size: 18mmWeight: 112

Name: Front Subframe Front Bush 10mmProduct Notes: Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use Bush Size: 10mm Bore SleeveWeight: 318Fitting Instructions

Name: Front Subframe Front Bush 12mm Product Notes: Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-120-10. Bush Size: 12mm Bore Sleeve Weight: 318 Fitting Instructions

Name: Front Subframe Mounting BushProduct Notes: Weight: 4300Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear Bush 10mmProduct Notes: Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-121-12. Bush Size: 10mm Bore SleeveWeight: 291Fitting Instructions

Name: Front Subframe Rear Bush 12mm Product Notes: Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-121-10. Bush Size: 12mm Bore Sleeve Weight: 289

Name: Front Tie Bar Inner BushProduct Notes: Weight: 1492Fitting Instructions

Name: Front Tie Bar Rear Bush Product Notes: Weight: 1492 Fitting Instructions

Name: Front Track Control Arm Inner BushProduct Notes: Weight: 565Fitting Instructions

Name: Front Track Control Arm Outer BushProduct Notes: Weight: 540

Name: Front Upper Control Arm BushProduct Notes: Weight: 541Fitting Instructions

Name: Front Upper Control Arm BushProduct Notes: Weight: 541Fitting Instructions

Name: Front Upper Control Arm BushProduct Notes: Weight: 612Fitting Instructions

Name: Front Upper Control Arm BushProduct Notes: Weight: 612Fitting Instructions

Name: Front Upper Control Arm Bush - Camber AdjProduct Notes: Allows you to fine-tune the front camber/caster/toe. Perfect for dialing in the alignment, improving the handling and minimizing tyre wear. The offset sleeve can give up to +/- 0.3 of camber. Weight: 792Fitting Instructions

Name: Front Upper Control Arm Bush - Camber AdjProduct Notes: Allows you to fine-tune the front camber/caster/toe. Perfect for dialing in the alignment, improving the handling and minimizing tyre wear. The offset sleeve can give up to +/- 0.3 of camber. Weight: 792Fitting Instructions

Name: Front Upper Control Arm Bush - Camber AdjProduct Notes: PFF3-203G allows you to fine-tune the front camber/caster/toe. Perfect for dialling in the alignment, improving the handling and minimizing tyre wear. The offset sleeve allows up to +/- 0.3 of camber adjustment. Weight: 714Fitting Instructions

Name: Front Upper Control Arm Bush - Camber AdjProduct Notes: PFF3-203G allows you to fine-tune the front camber/caster/toe. Perfect for dialling in the alignment, improving the handling and minimizing tyre wear. The offset sleeve allows up to +/- 0.3 of camber adjustment. Weight: 714Fitting Instructions

Name: Front Upper Wishbone BushProduct Notes: Weight: 648Fitting Instructions

Name: Front Upper Wishbone BushProduct Notes: Made using our range-topping Black 95A durometer polyurethane, these new bushes feature self-lubricating, inner PTFE-lined DU bearings with stainless-steel sleeves, housed in a mild-steel outer shell with supporting washers for compact packaging. This combination of PU and DU bearings delivers smooth articulation and excellent wear, with the compliance of PU and the high performance and precision of a metal bearing, while increasing stiffness over the worn OE rubber bush by 100% at 1mm displacement for true supercar handling. Weight: 1156

Name: Front Upper Wishbone BushProduct Notes: Made using our range-topping Black 95A durometer polyurethane, these new bushes feature self-lubricating, inner PTFE-lined DU bearings with stainless-steel sleeves, housed in a mild-steel outer shell with supporting washers for compact packaging. This combination of PU and DU bearings delivers smooth articulation and excellent wear, with the compliance of PU and the high performance and precision of a metal bearing, while increasing stiffness over the worn OE rubber bush by 100% at 1mm displacement for true supercar handling. Weight: 1156

Name: Front Upper Wishbone Bush Camber AdjustableProduct Notes: Spacious, modern and comfortable are all words often used to describe theVW Touareg.But who would have thought that with an increasing appetite for past-times such as off-roading and 'Green-Laning' that this VW flagship would be starting to see more dirt than one would usually expect of a luxury SUV?With this, it has created a demand for products that raise the suspension such as those offered by our friends atForge OverlandandDarkside Developments.However, with no current provisions for camber adjustability on the upper wishbone, and a little on the lower wishbones, lifting a vehicle can play havoc with the camber settings resulting in a positive camber figureMade with ourBlack 95APolyurethaneand supplied with an in-house CNC machined adjustable sleeve and adjusting spanner, we are now able to provide+/- 0.6 degrees of on-car camberadjustment, allowing for your suspension to be tuned to counteract the effect of the increased ride height.This product isn't just for off-road vehicles, however. It is well documented that regular road vehicles suffer terrible tyre wear issues with some owners getting as little as 8 to 10,000 miles from a set of front tyres.Our polyurethane technology guarantees improved performance and longevity over the OE rubber bushes and with an impressive31% increase in stiffness, they provide a tighter and more responsive ride, whilst prolonging tyre life. Weight: 1178Fitting Instructions

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360