80 - 90 - inc S2-RS2 & Quattro (1976 - 2000)

Name: Front Anti Roll Bar Mount 28mmProduct Notes: Bush Size: 28mmWeight: 59

Name: Front Anti Roll Bar To Control Arm BushProduct Notes: Fits models where there is no link rod between the anti roll bar and control arm. Bush Size: 21.5mmWeight: 81

Name: Front Anti Roll Bar To Control Arm BushProduct Notes: Fits models where there is no link rod between the anti roll bar and control arm. Bush Size: 21.5mmWeight: 81

Name: Front Anti Roll Bar To Control Arm BushProduct Notes: Fits models where there is no link rod between the anti roll bar and control arm. Bush Size: 21.5mmWeight: 81

Name: Front Anti Roll Bar To Control Arm BushProduct Notes: Fits models where there is no link rod between the anti roll bar and control arm. Bush Size: 23.5mmWeight: 81

Name: Front Anti Roll Bar To Control Arm BushProduct Notes: Fits models where there is no link rod between the anti roll bar and control arm. Bush Size: 23.5mmWeight: 81

Name: Front Anti Roll Bar To Control Arm BushProduct Notes: Fits models where there is no link rod between the anti roll bar and control arm. Bush Size: 23.5mmWeight: 81

Name: Front ARB Drop Link to Wishbone Bush 12mmProduct Notes: Fits Models Up To 1992 Chassis Number 8A-N-200-000. Bush Size: 12mmWeight: 52

Name: Front ARB Drop Link to Wishbone Bush 12mmProduct Notes: Fits Models Up To 1992 Chassis Number 8A-N-200-000 Bush Size: 12mmWeight: 52

Name: Front ARB Drop Link to Wishbone Bush 12mmProduct Notes: Fits Models Up To 1992 Chassis Number 8A-N-200-000. Bush Size: 12mmWeight: 52

Name: Front ARB Drop Link to Wishbone Bush 16mmProduct Notes: Fits Audi 80/90 inc Avant, Coupe up to 1994 (Chassis number 8B-L-003-791), 80/90 Quattro and Coupe Quattro up to 1992 (Chassis Number 8A-N-200-000) and Cabriolet 1992-2000 that use a kinked metal drop link to connect the bar to the wishbone. Bush Size: 16mmWeight: 55

Name: Front ARB Drop Link to Wishbone Bush 16mmProduct Notes: Fits Audi 80/90 inc Avant, Coupe up to 1994 (Chassis number 8B-L-003-791), 80/90 Quattro and Coupe Quattro up to 1992 (Chassis Number 8A-N-200-000) and Cabriolet 1992-2000 that use a kinked metal drop link to connect the bar to the wishbone. Bush Size: 16mmWeight: 55

Name: Front ARB Drop Link to Wishbone Bush 16mmProduct Notes: Fits Audi 80/90 inc Avant, Coupe up to 1994 (Chassis number 8B-L-003-791), 80/90 Quattro and Coupe Quattro up to 1992 (Chassis Number 8A-N-200-000) and Cabriolet 1992-2000 that use a kinked metal drop link to connect the bar to the wishbone. Bush Size: 16mmWeight: 55

Name: Front Steering Tie Rod BushProduct Notes: Weight: 88

Name: Front Steering Tie Rod BushProduct Notes: Weight: 88

Name: Front Steering Tie Rod BushProduct Notes: Weight: 88

Name: Front Subframe Front Bush 10mmProduct Notes: Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use Bush Size: 10mm Bore SleeveWeight: 318Fitting Instructions

Name: Front Subframe Front Bush 12mm Product Notes: Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-120-10. Bush Size: 12mm Bore Sleeve Weight: 318 Fitting Instructions

Name: Front Subframe Rear Bush 10mmProduct Notes: Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-121-12. Bush Size: 10mm Bore SleeveWeight: 291Fitting Instructions

Name: Front Subframe Rear Bush 12mm Product Notes: Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-121-10. Bush Size: 12mm Bore Sleeve Weight: 289

Name: Front Wishbone BushProduct Notes: This bush fits cast wishbones with 45mm bush. For pressed steel wishbones with 37mm bush, use PFF3-101. Bush Size: 45mm ODWeight: 595Fitting Instructions

Name: Front Wishbone BushProduct Notes: This bush fits cast wishbones with 45mm bush. For pressed steel wishbones with 37mm bush, use PFF3-101. Bush Size: 45mm ODWeight: 595Fitting Instructions

Name: Front Wishbone BushProduct Notes: This bush fits cast wishbones with 45mm bush. For pressed steel wishbones with 37mm bush, use PFF3-101. Bush Size: 45mm ODWeight: 595Fitting Instructions

Name: Gearbox Support Bush InsertProduct Notes: PFR3-126 is manufactured from our Yellow 70ShA material and fills the voids in the OE rubber mount to restrict movement, providing greater control at the front of the differential and increasing mount longevity for a part no longer available from Audi. Weight: 48

Name: Gearbox Support Bush InsertProduct Notes: PFR3-126BLK is manufactured from our Black 95ShA material and fills the voids in the OE rubber mount to restrict movement, providing greater control at the front of the differential and increasing mount longevity for a part no longer available from Audi. Weight: 48

Name: Gearbox Support Bush InsertProduct Notes: PFR3-126H is manufactured from our Grey 70ShA material and fills the voids in the OE rubber mount to restrict movement, providing greater control at the front of the differential and increasing mount longevity for a part no longer available from Audi. Weight: 48

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Camber Bolt Kit (14mm) Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts? Bush Size: M14 x 70mm Weight: 261 Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Anti Roll Bar Mount 12mmProduct Notes: Bush Size: 12mmWeight: 81

Name: Rear Anti Roll Bar Mount 15.5mmProduct Notes: Tear drop shape. Fits early Quattro and Sport Quattro models UR/WR (1980-1984) when fitted with a rear anti roll bar Bush Size: 15.5mmWeight: 65