3 Series

Name: Front Radius Arm To Chassis Bush Product Notes: This is a replacement part that in our Black material is 200% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster offset version please use PFF5-1901G. Weight: 1069Fitting Instructions

Name: Front Radius Arm To Chassis Bush Product Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. For a caster adjustable version please use PFF5-4001GBLK. Weight: 1505Fitting Instructions

Name: Front Radius Arm To Chassis Bush Product Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. For a caster adjustable version please use PFF5-4001G. Weight: 1505Fitting Instructions

Name: Front Radius Arm To Chassis BushProduct Notes: PFF5-401 Front Radius Arm to Chassis Bush uses our Black 95A material and is supplied with steel outer shells for better load distribution, offering improved durability and braking stability and a 140% increase over the worn rubber bush. Over the years we have seen a shift in the use of cars such as theBMW E92 M3 andE82 1M Coupe, with more of their time being spent on track and the power, chassis and braking modifications carried out, taking them from being quick road cars to very able and incredibly fast road-legal racers.Whilst creating this new part, we have revisited our existing non-adjustable partPFF5-401 Front Radius Arm to Chassis Bushso that it uses the same material, bush design and outer shell arrangement as above.This change in design increases stiffness by a further 25% over our previous offering for improved durability and braking stabilityand a 140% increase over the worn rubber bush. Weight: 1516Fitting Instructions

Name: Front Radius Arm To Chassis Bush Product Notes: PFF5-4101 has an offset bore machined into the sleeve to match the caster offset of the original bush. It also features on-car adjustment for further tuning and alignment. Weight: 1780Fitting Instructions

Name: Front Radius Arm To Chassis Bush Product Notes: PFF5-4101 has an offset bore machined into the sleeve to match the caster offset of the original bush. It also features on-car adjustment for further tuning and alignment. Weight: 1780Fitting Instructions

Name: Front Radius Arm To Chassis BushProduct Notes: PFF5-401 Front Radius Arm to Chassis Bush uses our Black 95A material and is supplied with steel outer shells for better load distribution, offering improved durability and braking stability and a 140% increase over the worn rubber bush. Over the years we have seen a shift in the use of cars such as theBMW E92 M3 andE82 1M Coupe, with more of their time being spent on track and the power, chassis and braking modifications carried out, taking them from being quick road cars to very able and incredibly fast road-legal racers.Whilst creating this new part, we have revisited our existing non-adjustable partPFF5-401 Front Radius Arm to Chassis Bushso that it uses the same material, bush design and outer shell arrangement as above.This change in design increases stiffness by a further 25% over our previous offering for improved durability and braking stabilityand a 140% increase over the worn rubber bush. Weight: 1516Fitting Instructions

Name: Front Radius Arm To Chassis Bush Product Notes: This is a replacement part that in our Black Series application is over 200% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster offset version please use PFF5-1901GBLK. Weight: 1069Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjustProduct Notes: PFF5-401G Front Radius to Chassis Bush Caster Adjustable to provide up to +/- 0.75 degrees of on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry. Made in our stiffest Black 95A material and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combines all of the necessary ingredients to be perfectly suited to both road and track use. Over the years we have seen a shift in the use of cars such as theBMW E92 M3 andE82 1M Coupe, with more of their time being spent on track and the power, chassis and braking modifications carried out, taking them from being quick road cars to very able and incredibly fast road-legal racers.Made in our stiffest Black 95Amaterial and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combinesall of the necessary ingredients to be perfectly suited to both road and track use.PFF5-401G Front Radius to Chassis Bush Caster Adjustableto provide up to+/- 0.75 degreesof on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry.This change in design increases stiffness by a further 25% over our previous offering for improved durability and braking stabilityand a 140% increase over the worn rubber bush. Weight: 1629Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjustProduct Notes: PFF5-401G Front Radius to Chassis Bush Caster Adjustable to provide up to +/- 0.75 degrees of on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry. Made in our stiffest Black 95A material and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combines all of the necessary ingredients to be perfectly suited to both road and track use. Over the years we have seen a shift in the use of cars such as theBMW E92 M3 andE82 1M Coupe, with more of their time being spent on track and the power, chassis and braking modifications carried out, taking them from being quick road cars to very able and incredibly fast road-legal racers.Made in our stiffest Black 95Amaterial and supplied with steel outer shells for better load distribution and an offset adjustable CNC-machined stainless-steel sleeve and spanner, it combinesall of the necessary ingredients to be perfectly suited to both road and track use.PFF5-401G Front Radius to Chassis Bush Caster Adjustableto provide up to+/- 0.75 degreesof on-car caster adjustment, resulting in greater in-corner camber gain, improved stability at high-speed and the ultimate optimisation of your vehicle's front wheel geometry.This change in design increases stiffness by a further 25% over our previous offering for improved durability and braking stabilityand a 140% increase over the worn rubber bush. Weight: 1629Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjustableProduct Notes: This is a replacement part that in our Black material is 200% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF5-1901G provides +/- 0.75 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-1901. Weight: 1069Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjustableProduct Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. PFF5-4001G provides 5.5mm caster adjustability to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-4001. Weight: 1078Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjustableProduct Notes: This is a replacement part that in our Black Series application is over 200% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF5-1901GBLK provides +/- 0.75 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-1901BLK. Weight: 1069Fitting Instructions

Name: Front Radius Arm To Chassis Bush Caster AdjustableProduct Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. PFF5-4001G provides 5.5mm caster adjustability to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-4001. Weight: 1078Fitting Instructions

Name: Front Track Control Arm Inner BushProduct Notes: Weight: 752Fitting Instructions

Name: Front Track Control Arm Inner BushProduct Notes: Weight: 752Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This part is not suitable for cars being used on track or for competition. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if this is the intended use for your vehicle. Bush Size: 60mmWeight: 528Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This part is only suitable for fast road or light track use. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if your vehicle is heavily modified and is used for heavy track use, or for competition. Bush Size: 60mmWeight: 528Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This part is not suitable for cars being used on track or for competition. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if this is the intended use for your vehicle. Bush Size: 60mmWeight: 528Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This fits the 4WD 'Xi/XD' models only. They are designed to fit the 60mm Aluminium housing Bush Size: 60mmWeight: 308Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mm Weight: 502 Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: This fits the 4WD 'Xi/XD' models only. They are designed to fit the 60mm Aluminium housing Bush Size: 60mmWeight: 308Fitting Instructions

Name: Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer)Product Notes: PFF5-3603BLK Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. PFF5-3603BLK uses a CNC-machined Aluminium outer shell to increase stiffness and durability further for the most demanding high-stress conditions. Weight: 596Fitting Instructions

Name: Front Wishbone Rear Bush (E46 Hybrid)Product Notes: PFF5-3601BLK Front Wishbone Rear Bush (E46 Hybrid) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner and outer bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. Weight: 386Fitting Instructions

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601-60 is a high-performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with a 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601-60 is a high-performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: This part replaces original bush and also fits M3 vehicles that have a thicker wishbone. PFF5-5601M3 is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions