Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Powerflex

Powerflex - Road Series

 

Der det skal være flere en 1 stk på bilen så er disse priset pr stk så her må en legge i handle vogn det antallet bilen trenger.  Send oss gjerne en mail info@koolart.no 

Hjulopphengsbøssinger er noen av de mest belastede komponentene som er montert på en bil. De utsettes for enorme belastninger og under de mest krevende forhold uten vedlikehold eller smøring.

Materialet de er produsert av er en gummiblanding som inneholder naturlige produkter som forringes med alderen. 
Den blir mykere og mer smidig, og motstår kreftene som utsettes for den mindre og mindre. Dermed tillater den mer og mer bevegelse av fjæringskomponenter og gir mindre og mindre kontroll over fjæringsgeometrien.

Dette fører igjen til akselerert dekkslitasje, ustabilitet i bremser og dårlig håndtering. Dette er den største grunnen til at du umiddelbart kan se forskjellen når du kjører en tre år gammel bil sammenlignet med en ny bil fra utstillingslokalet. 
Imidlertid vil selv nye biler dra nytte av POWERFLEX-bøssinger på grunn av den overlegne designen. 
De gir mye mer effektiv kontroll over fjæringskomponentene i mye større grad enn vanlige gummideler.

Med de teknologiske fremskrittene i dette materialet har det vært mulig å overvinne det vanlige problemet forbundet med hardere bøssinger, som er økt støy. 
Ved riktig konstruering av polyuretanblandingen kan bøssinger gjøres 25–30 % stivere enn nye gummideler, men med nøyaktig de samme støydempende egenskapene.

POWERFLEX-bøssinger gir mening.POWERFLEX for forbedret ytelse.POWERFLEX for økt sikkerhet.POWERFLEX for lengre dekklevetid.
Front Lower Radius Arm to Chassis Bush

Name: Front Lower Radius Arm to Chassis Bush Product Notes: This part suits arms with a 75mm diameter bush. For arms with 65mm bushes, please use PFF3-802. This is a replacement part that in our road series application is 35% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster adjustable option, please use PFF3-702G. Bush Size: 75mmWeight: 2014Fitting Instructions

1070.-

Front Lower Radius Arm to Chassis Bush Caster Adjustable

Name: Front Lower Radius Arm to Chassis Bush Caster AdjustableProduct Notes: This part fits arms with a 65mm diameter bush. For arms with a 75mm bush, please use PFF3-702G. This is a replacement part that in our road series application is over 100% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-802G provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-802. Bush Size: 65mmWeight: 1883Fitting Instructions

1320.-

Front Lower Radius Arm to Chassis Bush Caster Adjustable

Name: Front Lower Radius Arm to Chassis Bush Caster AdjustableProduct Notes: This part fits arms with a 65mm diameter bush. For arms with a 75mm bush, please use PFF3-702GBLK. This is a replacement part that in our road series application is over 60% stiffer than or Road Series material. PFF3-802GBLK provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-802BLK. Bush Size: 65mmWeight: 1883Fitting Instructions

1450.-

Front Lower Radius Arm to Chassis Bush Caster Adjustable

Name: Front Lower Radius Arm to Chassis Bush Caster AdjustableProduct Notes: This part suits arms with a 75mm diameter bush. For arms with 65mm bushes, please use PFF3-802G. This is a replacement part that in our road series application is 35% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-702G provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-702. Bush Size: 75mmWeight: 2131Fitting Instructions

1370.-

Front Lower Radius Arm to Chassis Bush Caster Adjustable

Name: Front Lower Radius Arm to Chassis Bush Caster AdjustableProduct Notes: This part suits arms with a 75mm diameter bush. For arms with 65mm bushes, please use PFF3-802GBLK. This is a replacement part that in our road series application is over 100% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-702GBLK provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-702BLK. Bush Size: 75mmWeight: 2131Fitting Instructions

1500.-

Front Lower Rear Diff Mount (MSport)

Name: Front Lower Rear Diff Mount (MSport)Product Notes: PFF44-107BLK is made in our Black 95A material and recommend for motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 60mm in diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 60mm DiameterWeight: 268

710.-

Front Lower Rear Diff Mount (MSport)

Name: Front Lower Rear Diff Mount (MSport)Product Notes: PFF44-108BLK is made in our Black 95A material and recommend for motosport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 62mm Diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 70.5mm DiameterWeight: 330

710.-

Front Lower Rear Diff Mount (Road)

Name: Front Lower Rear Diff Mount (Road)Product Notes: PFF44-107R is made in our Yellow 70A material and recommend for road use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 60mm in diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 60mm DiameterWeight: 268

650.-

Front Lower Rear Diff Mount (Track)

Name: Front Lower Rear Diff Mount (Track)Product Notes: PFF44-107 is made in our Purple 80A material and recommend for track use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 60mm in diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 60mm DiameterWeight: 268

650.-

Front Lower Tie Bar To Chassis Bush

Name: Front Lower Tie Bar To Chassis BushProduct Notes: Fits arms with a 59mm bore fitted to all petrol and diesel models except 535 to 540 and M5, which use PFF5-501. Weight: 1233

620.-

Front Lower Tie Bar To Chassis Bush

Name: Front Lower Tie Bar To Chassis BushProduct Notes: Fits arms with a 59mm bore fitted to all petrol and diesel models except 535 to 540 and M5, which use PFF5-501. Weight: 1233

680.-

Front Lower Tie Bar To Chassis Bush

Name: Front Lower Tie Bar To Chassis BushProduct Notes: Fits arms with a 59mm bore fitted to all petrol and diesel models except 535 to 540 and M5, which use PFF5-501. Weight: 1233

620.-

Front Lower Tie Bar To Chassis Bush

Name: Front Lower Tie Bar To Chassis BushProduct Notes: This bush fits 535, 540 & M5 Models, for all other petrol and diesel models use PFF5-510. Bush fits arms with a 66mm bore hole. Weight: 985Fitting Instructions

760.-

Front Lower Tie Bar To Chassis Bush

Name: Front Lower Tie Bar To Chassis BushProduct Notes: This bush fits 535, 540 & M5 Models, for all other petrol and diesel models use PFF5-510. Bush fits arms with a 66mm bore hole. Weight: 985Fitting Instructions

840.-

Front Lower Tie Bar To Chassis Bush

Name: Front Lower Tie Bar To Chassis BushProduct Notes: This bush fits 535, 540 & M5 Models, for all other petrol and diesel models use PFF5-510. Bush fits arms with a 66mm bore hole. Weight: 985Fitting Instructions

760.-

Front Lower Track Control Arm Inner Bush

Name: Front Lower Track Control Arm Inner BushProduct Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 24% to withstand increased loading seen by this position on the car. On the XJ X351, this part will only fit forged aluminium arms. It does not fit the black cast steel arms. Weight: 810Fitting Instructions

1090.-

Front Lower Track Control Arm Inner Bush

Name: Front Lower Track Control Arm Inner BushProduct Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 24% to withstand increased loading seen by this position on the car. Fits RWD models only. Weight: 755Fitting Instructions

990.-

Viser 1697 til 1728 (av 5504 produkter)

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Oppgrader bilen med kvalitetsforinger fra Powerflex – utviklet for deg som ønsker bedre respons, mer stabilitet og lengre holdbarhet enn originale gummiforinger. Powerflex polyuretanforinger gir redusert fleks i understell og oppheng, noe som forbedrer både styringsfølelse, veigrep og kjøreegenskaper.

Powerflex er kjent for høy kvalitet og produserer foringer til en rekke bilmodeller, både for gatebruk, sportslig kjøring og bane. Polyuretanmaterialet er betydelig mer slitesterkt enn tradisjonelle gummiforinger og tåler belastning, olje, salt og vær langt bedre.

Fordeler med Powerflex foringer:

  • Bedre stabilitet og styrerespons
  • Redusert slark i understell og oppheng
  • Lengre levetid enn originale gummiforinger
  • Mer presis og sportslig kjørefølelse
  • Motstandsdyktig mot slitasje og deformasjon
  • Enkel montering på mange modeller

Slitte originale foringer kan føre til dårligere kjøreegenskaper, unormal dekkslitasje og ustabil bil. Ved å montere Powerflex foringer får bilen et fastere og mer presist understell som gir bedre kontroll både på landevei og ved aktiv kjøring.

Vi tilbyr Powerflex foringer til en rekke bilmerker og modeller – blant annet bærearmsforinger, stabilisatorforinger, motorfester og komplette foringssett. Enten du bygger showbil, senket bil eller ønsker å forbedre originalfølelsen, er Powerflex et populært valg blant entusiaster og verksteder verden over.

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png