Golf MK4 (1997 - 2004)

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mmProduct Notes: For the smaller 30mm bush, please use part no. PFF85-201 Bush Size: 45.5mm DiameterWeight: 360

Name: Front Wishbone (Cast) Front Bush 45mm Camber AdjustableProduct Notes: This bush features a CNC-machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the smaller 30mm bush, please use part no. PFF85-201G. CNC machined stainless steel sleeve with knurled end pattern to prevent unwanted rotation.Rotate to adjust camber. Bush Size: 45.5mm DiameterWeight: 639Fitting Instructions

Name: Front Wishbone (Cast) Front Bush 45mm Camber AdjustableProduct Notes: This bush features a CNC-machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the smaller 30mm bush, please use part no. PFF85-201GBLK. CNC machined stainless steel sleeve with knurled end pattern to prevent unwanted rotation.Rotate to adjust camber. Bush Size: 45.5mm DiameterWeight: 639Fitting Instructions

Name: Front Wishbone (Cast) Rear BushProduct Notes: Fits the Cast Front Wishbone. Weight: 510Fitting Instructions

Name: Front Wishbone (Cast) Rear BushProduct Notes: Fits the Cast Front Wishbone. Weight: 510Fitting Instructions

Name: Front Wishbone (Cast) Rear BushProduct Notes: Fits the Cast Front Wishbone. Weight: 510Fitting Instructions

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201G boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

Name: Front Wishbone Front Bush 30mm Camber Adjustable Product Notes: PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201GBLK boosts stiffness over the original part by 15%. Bush Size: 30mmWeight: 355Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PABLK and for cast arms use PFF3-610BLK. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PA and for cast arms use PFF3-610. Bush Size: 23mm arm widthWeight: 519Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203. Weight: 630Fitting Instructions

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

Name: Front Wishbone Rear Bush, Pattern Arm Product Notes: This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410 Bush Size: 21mm arm widthWeight: 519

Name: Front Wishbone Rear Bush, Pattern Arm Product Notes: This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410BLK Bush Size: 21mm arm widthWeight: 519

Name: Jacking Point Insert Product Notes: PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time, again recommended for use in sets of 4 simultaneously. Fits the following vehicles:Audi A3/S3 Mk1 8L (1996-2003)Audi A3/S3/RS3 Mk2 8P (2003-2012)Audi A3/S3/RS3 Mk3 8V (2013-)Audi TT Mk1 8N (1999-2006) Audi TT/S/RS Mk2 8J (2007-2014) Audi TT Mk3 8S (2014 on) Audi Q2 (2017 on) Audi Q3 (2012 - 2018) Seat Toledo Mk2 1M (1999 - 2004) Seat Toledo Mk3 5P (2004-2009) Seat Alhambra Mk2 (2010 on) Seat Leon Mk1 TYP 1M (1999-2005) Seat Leon Mk2 1P (2005-2012) Seat Leon Mk3 5F (2013 on) Skoda Octavia Mk1 Typ 1U (1996-2004) Skoda Octavia Mk2 1Z (2004-2012) Skoda Octavia 5E (2012-2019) Skoda Yeti 5L (2009-2017) Skoda Superb B6 (2009-2011) Skoda Superb 3V (2015 on) Volkswagen New Beetle & Cabrio (1998-2011) Volkswagen Beetle A5 (2011 on) Volkswagen Bora (1999-2005) Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010) Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on) Volkswagen Golf Mk4 1J (1997-2004) Volkswagen Golf Mk5 1K (2004-2010) Volkswagen Golf Plus 5M (2004-2010) Volkswagen Golf Mk6 5K (2009-2012) Volkswagen Golf Mk7 5G (2012-2020) Volkswagen Jetta Mk5 1K (2005-2010) Volkswagen Jetta Mk6 A6 (2011 on) Volkswagen Passat B6 & B7 Typ3C (2006-2013) Volkswagen Passat CC 35 (2008-2012) Volkswagen Scirocco Mk3 (2008 - 2017) Volkswagen Sharan Mk2 (2010 on) Volkswagen Tiguan Mk1 (2007 - 2017) Volkswagen Touran (2003-2015) Volkswagen Touran (2017 on) Volkswagen CC (2012 - 2017) Volkswagen Eos (2006-2015) Weight: 105Fitting Instructions

Name: Jacking Point Insert Kit of 4Product Notes: PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time, again recommended for use in sets of 4 simultaneously. Fits the following vehicles:Audi A3/S3 Mk1 8L (1996-2003)Audi A3/S3/RS3 Mk2 8P (2003-2012)Audi A3/S3/RS3 Mk3 8V (2013-)Audi TT Mk1 8N (1999-2006) Audi TT/S/RS Mk2 8J (2007-2014) Audi TT Mk3 8S (2014 on) Audi Q2 (2017 on) Audi Q3 (2012 - 2018) Seat Toledo Mk2 1M (1999 - 2004) Seat Toledo Mk3 5P (2004-2009) Seat Alhambra Mk2 (2010 on) Seat Leon Mk1 TYP 1M (1999-2005) Seat Leon Mk2 1P (2005-2012) Seat Leon Mk3 5F (2013 on) Skoda Octavia Mk1 Typ 1U (1996-2004) Skoda Octavia Mk2 1Z (2004-2012) Skoda Yeti 5L (2009-2017) Skoda Superb B6 (2009-2015) Skoda Superb 3V (2015 on) Volkswagen New Beetle & Cabrio (1998-2011) Volkswagen Beetle A5 (2011 on) Volkswagen Bora (1999-2005) Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010) Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on) Volkswagen Golf Mk4 1J (1997-2004) Volkswagen Golf Mk5 1K (2004-2010) Volkswagen Golf Plus 5M (2004-2010) Volkswagen Golf Mk6 5K (2009-2012) Volkswagen Golf Mk7 5G (2012-2020) Volkswagen Jetta Mk5 1K (2005-2010) Volkswagen Jetta Mk6 A6 (2011 on) Volkswagen Passat B6 & B7 Typ3C (2006-2013) Volkswagen Passat CC 35 (2008-2012) Volkswagen Scirocco Mk3 (2008 - 2017) Volkswagen Sharan Mk2 (2010 on) Volkswagen Tiguan Mk1 (2007 - 2017) Volkswagen Touran (2003-2015) Volkswagen Touran (2017 on) Volkswagen CC (2012 - 2017) Volkswagen Eos (2006-2015) Weight: 400Fitting Instructions

Name: Lower Engine Mount Small Bush Product Notes: Weight: 178Fitting Instructions

Name: Lower Engine Mount Small Bush Product Notes: Weight: 178 Fitting Instructions

Name: Lower Engine Mount Small BushProduct Notes: Weight: 178Fitting Instructions

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Non Power Steering Rack MountProduct Notes: Weight: 72

Name: Power Steering Rack Mount Product Notes: This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 49.5mm to suit LHD ZF power steering racks. For 44mm diameter steering racks and a 18.5mm wide bracket use PFF85-232. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233. Bush Size: 49.5mmWeight: 66